I found this table idea on:
http://diy-my-homes.com/stunning-purebond-plywood-dining-table/
...then went for it. This is only the third thing I have built so it was one of those "Sure, I can do that" projects. At first I tried the hairpin metal legs, but they just didn't look right so I went with another design which I feel came out much better. Did a mix of 1 1/2" Birch and Oak strips on top of 3/4" MDF for the top. 2x6 routed out X for the legs bound together with 3 1/2" lag bolts and a 4x4. The chairs you see I picked up for $10 each from IU's surplus warehouse and the before/after are in the picture. All in all I am happy!
Thanks to Ana, Kelly and Dave for sharing their plans.
Estimated Cost
Table and Chairs - $250
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
Minwax Express - Black, Walnut, Oak, Black/Walnut mixed to make espresso, Minwax poly oil based seal.
Legs - Black gloss spray paint and clear coat.
Legs - Black gloss spray paint and clear coat.
Recommended Skill Level
Intermediate
Comments
Dressed2Press
Thu, 03/20/2014 - 04:00
Impressive for a first
Impressive for a first project. I love how you used the different stains.
Dressed2Press
Thu, 03/20/2014 - 04:00
Impressive for a first
Impressive for a first project. I love how you used the different stains.