Build a cute curvy side table from a simple 2x10.
You can check out more building details at Hertoolbelt.
Preparation
1 - 2"x10"x10'
2 - 18 1/2" x 1 1/2" x 9 1/4" (2x10)
The 18 1/2" pieces will be used for the table top, the rest of the 2x10 will be for the legs.
Please read through the entire plan and all comments before beginning this project. It is also advisable to review the Getting Started Section. Take all necessary precautions to build safely and smartly. Work on a clean level surface, free of imperfections or debris. Always use straight boards. Check for square after each step. Always predrill holes before attaching with screws. Use glue with finish nails for a stronger hold. Wipe excess glue off bare wood for stained projects, as dried glue will not take stain. Be safe, have fun, and ask for help if you need it. Good luck!
Instructions
Step 1
Step 2
I've created two table heights, a 23" and 27". Download and print the leg pattern from here.
Trace 2 leg patterns on the 2x10, you can nest 2 legs together to waste less wood. Cut 3/4" off of the butt of the pattern and trace 2 leg patterns on the 2x10, again nesting to save space.
Step 3
Step 4
Step 6
It is always recommended to apply a test coat on a hidden area or scrap piece to ensure color evenness and adhesion. Use primer or wood conditioner as needed.
Comments
tracysmith
Sat, 09/27/2014 - 20:26
Oooooh, this is soooo cool!!!
Oooooh, this is soooo cool!!! I LOVE this project! Thank you for sharing and I can't wait to see if I can tackle this one for me! :-)