Community Brag Posts
Rustic Console Table
I followed the plan, and used plain pine wood. The wood cost $106 at my local Home Depot. The Kreg R3 Jr. Jig, Clamp and Screws I already had from a previous project. This is a weekend project. Biggest obstacle here is to make sure the shelves stay level. After it was built I sanded everything with 180 grit before going to the staining step.
Stain... I made a pot of STRONG Tetly Black Tea and painted the entire table. I decided to go with this Oxidizing Stain (http://www.sweetpickinsfurniture.com/2011/01/how-to-weather-new-wood.ht…) for the wood. The Black Tea increases the tannins in the wood, which makes a stronger reaction in the woodgrain after you apply the oxidizing solution. After the solution dried I sanded lightly with 180 grit again and now it's ready for Wipe-On Poly to be applied.
Just one small hint.. The Oxidizing Solution takes a few days to react, so plan accordingly. I let mine set for 7 days before use.
Braden Shoe Drawer, Hutch and Mail Sorter Entry System
Thank you for helping our family stay organized and keeping our entryway clean.
1ere réalisation
Réalisation d un meuble pour poser la plancha
Printer's Console or Sneaky Litterbox Cabinet? Cat Litter Box Cabinet
I had been wanting to build something to hide the litterbox for a long time. When I saw the Printer's Console plan, I knew this was the perfect plan for a cat litter box furniture. I loved that Jen Woodhouse's version was completely modified to her bar plan, so I thought I could modify for my litterbox idea. I modified the plans on size, as I was trying to use a bunch of mis-matched plywood. I also modified it to include a cat door, a cat passageway on interior panel, a vent on the back behind one of the drawers, and the stone top. I built a frame on the back to house the backing as an inset piece, as I didn't want it to be seen at all. I learned a very important lesson during this build. Not all 1x3s are created equal. Once I got my doors assembled, they were too big for the opening. I couldn't shave off the tiny amount needed, and couldn't make anything work short of starting over with 1x4s, sawing off a small amount, and cutting down the # of "drawers" (and handles). I wanted the inside to be fully finished (because cat pee on raw wood would not be good!). I had to finish certain "planes" prior to putting the thing together. I used kitchen and bath paint on the inside floor and sides for easy cleanup. The stone was carryover from construction on our house 12 years ago. The handles were an amazing deal @ $1.81/each .
Comments
Sun, 11/25/2012 - 09:51
That is a fantastic idea and
That is a fantastic idea and the table top is beautiful.
Mon, 11/26/2012 - 09:38
That is the most beautiful
That is the most beautiful litter box I have ever seen!
Mon, 06/17/2013 - 12:23
So we are not crazy!
Love your use of the buffet. Our family has discussed making a piece of furniture like this for our smaller dog. Nice to see someone has done it! Our big dog has scheduled feedings but our little dog would prefer to be a free feeder. Poor thing chokes down his food in our pantry listening to our big dog breathing under the door waiting for him to finish. When he is done we open the door and the Big, greedy dog bolts in looking for left overs. A family member has to wait patiently for the little dog to finish so he can escape the pantry. I really don't want a doggy door in my pretty swinging bi-fold doors to my pantry which is also access to our kitchen.That would be a pain to have to keep closed all day. But this buffet idea is super cute! Thanks for the inspiration.
Fri, 01/09/2015 - 22:01
tile top
I know this is an old post, but I'll ask anyway
I love this piece and am in the planning stages for ours. Thank you for sharing!
I am Wondering how you went about the table top. Did you install a 3/4 ply on top but not flush, allowing room for mortar and tile? If so how much room did you allow for the tile/mortar? 1/2 inch? How did you keep the surface of the tile level and uniform? Lastly, did you seal the tile with anything when you finished?
Aesthetically, the tile top really sets this piece off and I really want to make my own.
Thanks
Rustic tv stand
Rustic tv stand made from pallets and reclaimed ship lap and 2x4's
Comments
Mon, 09/08/2014 - 11:32
Beautiful Workbench Console!!!
This is so beautiful! I bet the reclaimed wood is even more beautiful in person!
Did you adjust the size?
Thanks so much for bragging!
Tue, 09/23/2014 - 20:39
Thanks Ana!!
I actually made this without the plans. I saw the picture on pinterest that wasnt linked to your site and just made my own plans for it. If I recall, I made it 5ft in length. BTW, big fan of yours! Your plans are so detailed and your pieces give me so much inspiration as a fellow furniture builder. If you have time I'd love for you to check out my facebook page, jennamaedesigns, and tell me what you think. I'm new to the building bizz but I love it! Thanks again for commenting
Thanks for a super project!
I used cedar, stainless steel rails and finished with marine spar varnish. Gave to my son for Christmas to hold his smoker/barbeque! Thanks for the super project idea!
Comments
Over the Bed tree house
The directions on this aren't very clear and there's a few that I think are off all together. It came together fine with some adjustments and the kid like it so alls well that ends well, I guess.
Farmhouse table - Tobacco farm wood
The end result of this project was incredible. The table is 3ft x 6ft x 31inches - Built with Tennessee tobacco farm wood. I used KREG for all the joining, even the legs. Finished it with the one and only Annie Sloan Paint/Wax combination.
Comments
Bookshelf Cubby for Fabric Drawers
This was an easy build and I'm so happy with the finish. I used Hilary's oxidizing vinegar solution first. I didn't feel it was "grey" enough so I put on a coat of Minwax Weathered Grey. Let dry. Added a coat of Minwac Special Walnut and finished with Pastewax. Love, love, love! They are very sturdy!
Moore Kitchen island
My wife wanted an island so bad and didn't like any of the plans but this one. This was my first big project but it worked out well. In the front middle section, I went with a two trash can sliding cabinet. Took me around 36 hours to complete. I also found plans for tall bar stools that I used and made the chairs with the island. We found a stone place that had scrap granite that we bought cut to size. My wife loves it. Great Christmas present!!
Comments
Sun, 01/01/2017 - 19:01
I too am looking for the plans
All I see is a PDF with the dimensions but not the step by step plans. Can you please share the actual plans? I am hoping to build two of these to go on either side of our fireplace.
Cheers,
Easy DIY Workbench on Wheels
I needed a workbench and Ana's easy plans were perfect for what I needed. I have a small one-car garage that I do my projects out of. The garage also provides storage for bikes, kayaks, gardening tools, etc. I customized the dimensions a little, making the bench only 30" deep to better fit the space available, and to add wheels to be able to roll the bench out into the driveway if needed. The lower shelf provides some good storage for me as well.
Harriet higher chair stained
This is the perfect chair height for my 5 year old son. Was easy to build for a novice, and after a lot of sanding, I stained + varnished and it turned out quite nice, to match with the desk I made which we can see in the picture background. It does take 3 of the 2x2x8 instead of 2, but at $2.5 each... Total cost of approx. $7 since I made the seat and back rest out of the scrap I had. I'm thinking of making swivel stools for my kitchen out of the regular height plan. I also cut the seat a little larger to have about 1/4" overhang all around except at the back.
Changeable Play Stand
I love this, so did our son.
My attempt at the Benchmark Media Console
Had oak from my family farm that made up the top and trimwork. Purchased oak board for the legs. Sides and middle/bottom shelf from maple plywood. Decided against the flip down doors. Wasn't happy with he fit of the main doors due to a little off-kilter craftsmanship on my part, so will probably leave it open and add crates / some shelves the same height as the top row giving like 6", 6", and 11" or so.
Large tapered wooden plant boxes
Easy to follow plans and make adjustments with materials I already had lying around. Love them! Thanks for the plans Ana!
Comments
Sun, 09/13/2020 - 11:21
Beautiful!
Great, job. Absolutely love the finish choice and greenery! Thanks for sharing:)
Happy Granddaughters
Made for granddaughter who loved the McKenna bed at American Girl. She loved the ability to customize because she has the Kanani doll. Will paint light blue (Kanani's favorite color) and have Hawaiian print bedding.
Doors galore
Just a couple of pictures from our kitchen remodel. My husband and I have built 59 cabinet doors for our house, kitchen, laundry and two baths. The cost of wood only $604 , we chose to use finished ply for the panels and poplar for the stiles and rails. We could not have done this with out Ana, thank you from the bottom of my heart!
We are still in the process of our remodel, but I wanted to show what a little time, sweat and very little $$ (compared to the $10,000 + quote) can get you with determination and a few basic skills.
Kitchen Island
Built 4 foot kitchen island. Used mix of cedar (2x6 decking)for top and rest was Douglas fir wood from home depot. Legs were 2x6 nailed to 2x4 Doug fir wood. 1x4 pine was used for the shelves. Measured distance to hold wine bottles. Cost approximately $100.00 in wood. Miniwax ebony and jacobean was used for stain. About 50/50 mix. Epifanes wood gloss was used to varnish. It's a superior product to use, however can be pricey. Can use a poly if concerned about costs.
Potting bench 2.0
Made it a bit wider, added a shelf and wheels.
X End Table
Building is turning into such a blast for my husband and I. This is our second project and let me tell you, with a few extra tools and practice, it's getting easier! We will be finishing up the second one of these this weekend then starting on the X Coffee Table, to be followed by the X Console Table. We are due to buy our first home in January so we are waiting til we get our home to decide on a stain.