Community Brag Posts

I did not have any plans for this.  I had the dimensions from the West Elm Website so I did my best to match that.  My sister asked me if I could build this for her and I saw it as an awesome challange.  I used euro style hinges for the doors and the left side shelf is sitting on wood strips nailed in the sides.  There is also a shelf inside the cabinet.  I built the stand and she stained it.  

This was my second time welding.  I used a Mig Welder that my buddy had.  It was a little intimidating at the very beginning but Mig welding is super easy.  You can grind the welds down fairly easy too.  I sray painted it all with a flat black spray paint.  I think it turned out really well.  I had a steel shop her in town cut all the steel to the sizes I needed.  All I had to do was weld and paint.

I really appreciated your garage/mudroom project guidance. I stumbled on it as I was trying to figure out how to design my project. I basically copied yours!! 😁

You also turned me on to pocket hole joinery. Previously I have used a biscuit joiner and find it very challenging. Thank you, I am a convert!

Thank you so much for the plan. I created a console table by adjusting the dimensions (finished table is 54 x 18 x 30) and omitted drawers. Used Modge Podge to adhere raffia to table (this was the most time consuming part of the project). Finished with a clear coat of polyurethane. Based this project on a table I originally saw in the HGTV Green Home 2010 master bedroom. http://hgtv.sndimg.com/HGTV/2010/03/03/GH2010-105_03-master-bedroom-wid…

I can't take credit for the bed, just the steps. After my friend purchased a new bed for their daughter, she needed some helping getting into it. The plans for these steps were great and easy to build. Very sturdy and lightweight for kids to move around.

First ever project. Just testing my skills and all materials were low grade.  Next project will be better grade wood 

Used your plan as a start and improvised from there. Thanks

I have come across several tables and chairs for doll furniture and decided I wanted to make something a little different.

I made a basic table and used 64 1 1/8 inch squares.
32/32 painted red/black and the other sides painted pink.

table is pretty popular around town so I decided to test Ebay and my website www.funwithdolls.com and I actually started selling a few.

Wayne

Mostly the same. Made smaller spacing for the seat (used 1x4 for spacing) and gave it a back (18" 15% miter) hand formed the front seat board and a bit of an overhang also hand formed the tops of the seat backs and armrest idea was it would be comfy with or without cushions. Ow and it's all construction grade lumber that I water sealed. Thanks for the idea!

Super easy to build ,thanks for the instructions!!!!!!

This is my very first Ana White build! I needed a table to go into my craft room and stumbled upon Ana White. What an AMAZING site! After browsing and finding many projects i would like to give a whirl i finally decided on this modern craft table. My husband and I have worked together on many different projects and decided we would try this one. The plans were very easy to follow although we did make a few mistakes along the way. I painted it white and finished with several coats of poly. All in all we love it and have a list of other builds to do next.

Make sure to check us out at SouthernChicLove.Blogspot.com!

Modified Subway tile bookcase. 7' tall by 4' wide.

This project was for our 4 year old daughter.  We wanted to get her a loft bed, but I wanted to make sure the rails were really tall so she didn't fall out.  So, I took some inspirtation from loft beds on this website as well as looking at pictures of beds you can buy.  I also added the drawers within the stairs because I wanted to utilize the storage potential.  That was the most difficult part as I'm not particularly experienced in making and installing drawers.  Off to YouTube tutorials I went and it turned out quite nice.  I had to build it in three different parts to get it in her room.  It's the actual bed portion, the stairs, and the side wall.  Once I got it together, I left the screws showing that I connected it with, which I hate, but when we have to move it out of there, I didn't want to go through a ton of trouble.  I used Kreg pocket holes for all of the vertical bed slats which caused a ton of work plugging the holes, cutting off the excess, sanding, and then sanding again and again.  But, it was well worth it.  We have made her a cozy little nook underneath the bed and added a light since these pictures.  Overall, it was a fun project

So after my husband and I conquered the headboard, we decided that we were geniuses at furniture making and we would just build the two side tables. Well, the two side tables are much more difficult than the headboard. The side tables are definitely do-able but make sure that you leave plenty of time for them. We built most of them on a Sunday and then finished them up in the evenings the rest of teh week. We do not have a Kreg Jig and were able to build them without it; however, if you have a Kreg Jig it would make thing 1,000 times easier. We did end up buying a miter saw because we were building the Old style Workmen's Bench bar at the same time (crazy, I tell you). It is CRITICAL to make sure that your inside drawer measurements work. If you are off just by a little, your drawer pulls are not going to fit. We ended up buying bottom mount drawer pulls. The drawers are a little less stable and can hold less weight (up to 35 pounds) but it worked for us. I think the real key to finishing this project are choosing the right drawer pulls. I really believe that spending a little bit more on the drawer pulls makes the piece look more expensive. We spent about 6.50 a drawer pull but they look really nice in person. TIPS **Stain drawer faces off, then attach hardware, then attach to drawer base **If you are going to use wood filler (I wouldn't), make sure that you use the least bit possible - the stain does not take to it the same

Just a little something to go in the dining room. I like the look of it. If I find another need for one I would definitely make this again accept use a different stain and paint the base white and use a semi-gloss or gloss protective finish.

I modified this plan by removing 1/3 of the table so it would fit our dining room. I used the farmhouse bench plans and "upholstered" them. This is the result. I used construction grade pine. Some of the table was altered by mistake, other bits on purpose. This project took me 40+ hours to complete. Weekends, a afterwork.