Community Brag Posts

My husband wasn't home this week, so I had to create something.. He's just lucky that I didn't give the kitchen a makeover! ;]

I modified and improvised with what I had lying around... I used a 1x4 for the bottom because I didn't have enough 1x2 scraps left, but then I decided to put the lettering on it because I thought it looked too plain. I like how it turned out!! :]

We built the Farmhouse queen bed and fancy X desk for our bedroom. It was relatively easy and looks so great! The bed is made of pine and cedar. (It is really really hard to find pine 4x4 posts that aren't pressure treated around here.) We used pine for the desk. Paint color on the bed and base of the desk is Behr "Polar bear" with a coffee stain distress. The desk top is Benjamin Moore "Dash of pepper." The bed cost about $175 to build and the desk cost $30. (We used a lot of scraps for the desk.)

Very easy to do.  Love how it has improved the look in our kitchen since the original garbage can is no longer an eye sore. 

http://thefelicianojourney.com/2015/10/30/diy-wood-tilt-out-trash-bin/

I made matching step stools for my kids.

This was the first table i built a couple of years ago at the age of 19, it is just a simple trestle leg table made from white oak. The dimensions are 10 feet long by 3 feet wide.

I built this for my mom's guest room.  She watched my kids and I worked in the garage.. couldn't have been a better vacation! :)

I used 6" (finished size 5") tongue and groove boards for the panel, shorter posts and screwed main structure pieces together using 5-1/2" lag bolts and plugging with 3/4" dowel pieces.  I added woodedn blocks at the bottom of posts for attaching metal bed frame.

My dad didn't have any pipe clamps so I ended up using a wratcheting strap!  HA!  Use what you can and save money! :)

We built this tilt-out cabinet for our trash and plan to build a matching one for our recycling. We modified it a little and used bead board on the face of the cabinet to match some other elements in our kitchen. We painted it bright red using some leftover paint and absolutely love it!

We ended up not using any mechanism to prevent the drawer from falling to the ground - the trash can we purchased is JUST big enough that it stops the drawer from opening all the way, which is great!

There are more pictures below and on our blog, http://strawbridgestuff.com

I am so happy with how this shelving unit turned out! I adapted Ana's plans to the size of our closet space - the shelves are actually 33" deep. One side of the wall is studs, which is how I secured the unit. Now we can put away all of our Christmas decorations! 

This might be my proudest build to date...crazy since it's just a closet shelving unit :D

One of my first projects and first attempt at sewing since 7th grade!

I used Ana's plans for the Simple, Cheap and Easy Console Table and modified it. I used 1x4 boards for the top of my table and added a bottom shelf using 1x3s. The top is stained with Minwax Early American and the bottom of the table has 2 coats of red paint and a chocolate glaze. I lightly sanded some areas of the table (it was my first time distressing a piece of furniture so I didn't want to overdo it) and then I used a chocolate glaze to get a distressed look. I finished it with 3 coats of Polyurethane.

First project. Followed the plans exactly. Since it was my first project I used furring strips to save money. It still ended up costing me a bit for some extra tools (counter sink drill bits, wood filler, sanding paper). Used a cream color water based paint for the base coat followed by a very light coat of bright blue on top. I sanded it to the desired distressed look I wanted then sealed it with a clear coat.

edited the plans a little bit because the original plans were too tall. my cabinet is only 36 inches high. I did the inlet doors but if I had to do it over again i would ABSOLUTELY do overlay doors to cover up any imperfections in the opening. this project is a little bulky to move around and therefore get the shelves level, at least it was for me.

Also, I cut the back two inch strips to fit more snuggly. I ripped one piece at a 45 so it fit more flush against the other 1X2 on the back. This cut around the back of the shelves better in my opinion but isn't necessary.

I chose to do a similar paint treatment. i sprayed on a nice dark grey with my wagner 590 sprayer and then did a white wash with a big 4inch brush and just brushing on liberally (and mostly dry)

GREAT Project and fits the space very well. THANK YOU!

A new crib for a new baby. The foot and head board can be attached with the side rails to put together a full sized bed. In theory,  this should be the only bed they need for their little dude with just  a few additions (new footboard). 

Reclaimed wood headboard. Cost: $100. Time: 4 hours.