Community Brag Posts

When my wife and I moved we sold our old table and was in need of a new one. We've shopped around and didn't like anything we were seeing. She insisted that I build one but I never had any time due to my job. In the past it would've been easy because that's what I did was woodworking. So she researched and came across ana's plan and she loved it. Keeping the wife happy I made time. I made my material list & cutlist but was concerned with using construction grade lumber for the tabletop due to over time it likes to cup and warp in the right conditions. Instead I went with 8/4 Poplar which will make a solid tabletop and last forever. I was only able to work weekends on the project so it was finished in a month which I added the total hours & it equaled 1 week.  She loves her new table and is now shopping for 5 canvas chairs to go with it. With her posting on social media I now have requests to build more. Where will I find the time?

Quick and easy to build, the bit that took the longest was the stain, I used a maple satain and varnish.

The original (project from That's My Letter) was longer, deeper, and had two doors. I needed something smaller and narrower to fit the space and hold a tv. By cutting down the size, I was also able to make this using 1 sheet of 3/4 inch plywood instead of 2. After painting the aluminum hardware and pulley wheels, I learned that I probably could have had them powder coated by a family member. Unless you don't mind some of the paint coming off where the wheels rub, I would suggest trying powder coating or some more durable finish. Since it's a rustic look, I guess it doesn't matter all that much if some paint comes off. I used an off-brand pocket hole jig to construct the stand.

I decided to make longboards as birthday gifts for some of my other nephews.  I had made a regular skateboard prior, but I decided to try longboards this time and I'll probably make one for myself down the road since I'm a bit of a child myself :)

More details and photos on my blog:

http://www.woodworkingfourdummies.com/blog/diy-longboard

Cheers,

Ian

Faux fireplace.

I needed a way to turn my large, open, many-windowed Foyer into a functioning entry way. I Loved Mimi's Storage Bench, but i needed the dimensions to be very different, so I used her bench as a concept guide.
The bench under the window is 76 inches, and the bench on the right that backs into the corner is 58 inches. I used a four inch foam pad. I think the pad might have been excessive- it cost a lot more money than I had intended to spend.
This is my third building project. Previously I built some bookshelves and a set of shed doors.
I would consider this an entry level project. The hinges on my fold down drawers were the most aggravating part. The whole project would have been much easier if I had been able to use Mimi's exact plans. As it was, I had to make my own cut list and purchase list.

So I was searching for a sturdy table to build for outdoors next to my grill. I came across your plans for the Gaby kitchen Island and decided to give it a shot. Off to the lumber yard and as I am new to this I accidentally bought 4X6 's for the legs which threw me off just a little. No harm no foul just had to adjust and just made it that much more sturdy. I also wanted something I could use to throw some "beverages" into and decided on a basic stainless steel kitchen sink. Put in some plumbing and added a piece of 3/4" plywood to the top cut a hole with a router and routed the edges. Now I just need to close in the sides at the top and I am toying with the idea of making a butcher block as a lid for the sink. Then a little paint and it will be ready for summer.

My Father and I worked on this table together and had a blast! I was searching for something that I could customize for a long wall in our Family Room and these plans and resulting table were perfect. 

This design is a modification from another entertainment center I built earlier this year. I had a neighbor come over and fall in love with mine and asked if I could build another. I think it cam out pretty well, but tell me what you think....

With a newly finished bathroom we were looking for some stylish storage that fit the space.

During the demo a number of pieces of cabinetry came down and a salvage most of that wood. I also had a couple bi-fold closet doors in my garage that i decided to put to use.

We're totally satisfied with the end product and will be continuing to try our hand at custom pieces.

A much needed space to keep all my usb plugs and chargers but leave room for the dvd burner.

So I took your plans and modified it to suit my needs.

thanks for the incentive Ana as this is my second project I made after the outside bench :)

This was a fun project to do. I am going to add a piece of 24 x 24 sheet metal to the top of it to serve as a smooth flat area to write on. I didn’t have any 1 x 3′s on hand so I ripped several 2 x 4′s down to 1 x 3 which is where I came up with the 1 x 2′s that are running across the top. I’m working on imagineering a chair to go with it, I will post pictures of that as well when I get it put together. If you have a questions or comments feel free to post.

I used the Vintage Bar Stool plans and modified the height and depth of each chair so that they would fit with an indoor bar height. At the time I didn't have a kreg jig, so I used dowels to connect everything. It took much longer since I had to wait for the wood glue to dry, but they are very sturdy and you can't see and drill marks. I used milk paint over stain to get the distressed look, and I love how they turned out!

This was a fun project.  Used just the standard cheapest wood from home depot.  Seems like no matter how hard I work on trying to get good pieces, there is always something off with them.  While the main parts of the project didn't take that much time, the sanding took a good deal of time.  Maybe ill buy some better wood next time!  Used a 60 grit, then a 150, then a 220.  Used a minwax stain with a minwax poly in satin.  sanded the poly with a 220 not to just get it smooth but to give it a less shiny look.  Very happy with the finished product, but every project I learn a few things to bring to the project and improve.  This table is very heavy.