Community Brag Posts

I personalized this bench for a gift for my mom's birthday. I stamped both of my girls handprints on top and added their names and date. Turned out so cute :)

Oh Goodness. This was a HUGE project for us. It was our 2nd Ana White build (the 1st can be seen in the pictures, the kitchen island with the microwave on top). We changed the overall dimensions to fit our kitchen. And we built two matching benches. The hardest part was kreg jigging. We did SO MANY pocket holes and it was our first time using a kreg jig on a LARGE project. We also trimmed up the sides of each of the table top boards so they fit closer together. We really really LOVE this table. And my kids are putting their own special touches on it daily. Thanks for the plans!!

I had a great time builidng a shorter version of the Rustic X console table. Total length is 41inches.

Six foot by 22" buffet with open shelves and reclaimed window cabinet door.

This was our first build. My husband and I really enjoyed working on these! The build went very quickly and the plans were well-detailed. The painting was the most time-consuming part!

We loved the one from Ana's site and had to have it.

Printed off instructions and purchased material.
Didn't take long to build.

I love it

easy project to make

Went shopping for a dining room table and had no luck so I convinced my wife we could do it. About six hours over 2 days and $150 in material this is the result. Thanks for the ideas!

One thing great about the plans on Ana White's site is that you can change them. Plans that don't seem applicable to your needs can be changed around to fit them. For example, this is the children's magazine rack, repurposed as storage for magazines. (Magazines used to sit around in piles around the house as they came in--what a mess!)

After finishing the building and painting, but prior to antiquing, I added 1910 magazine logos and the prices the magazines sold for during that year, to create the feel of it being an antique magazine rack one might find at a period newsstand. These were found using Google Images. When you look, think about the general genres of magazines you subscribe to, or even use vintage logos from your favorites. I chose to do a variety (the last one is a now out-of-print children's magazine). I didn't have any carbon paper, so I used a heavily-inked newspaper ad as "carbon paper." Painting the text with a tiny brush was very tedious, so I put water-based craft paint onto a watercolor marker's tip and "colored." It seemed like I had more control of the paint that way. The close-up photo shows the titles and prices of the magazines on the crossbars.

This type of project of course cannot be sold, since it uses company names and logos. But it's a fun way to conveniently display your personal magazine collection!

So, remember, you can repurpose a plan on the site for something that fits your own needs! In the near future I hope to show how to convert the Kid's Storage Step Stool plan into a storage bed step for adults.

Tip: The moulding called for is likely too tall for a manual miter box (it was for mine). I ended up cutting the moulding blunt and then doing a lot of sanding to make it match as closely as possible. It doesn't look as nice this way, but it was the only way I could cut it. And as for the "Estimated Time Investment" listed, I am a slow builder, so don't let that dissuade you!

I had been thinking about making something to go with the nativity scene that I made a few years ago, and was so excited to see the plans for this stable this morning. It's less historically accurate, but much easier to build than a cave. =) I had cedar fence picket scraps laying around, so this project didn't cost me anything extra.

I built this for our family room TV and all the components. We wanted to hide all of the TV cords from view when we walked down the stairs - this was perfect! I'm so proud of it! Since this was going to be used where you were able to see the profile, I inset the planked back of the hutch and had to shave off 3/4" for the hutch shelves. I used pocket holes to hold the planks together for the back of the hutch. I decided to add cabinet doors to the console so that I could hide away all of the gaming supplies and unsightly necessitates. I used pine wainscoting and trim with a lip to hide the edges from view.

Love my outdoor couch. Easy to build and follow plans. Thanks Ana!

I picked this bench because our entryway isn't very big and this was small enough that I didn't have to make any alterations to the size.

Did this in January 2013.

Slight alteration of the Traditional Wood Toddler bed:
http://ana-white.com/2011/10/traditional-wood-toddler-bed

Made the rear posts taller so I could cutoff the triangle shape for the rockets. The front is the same with no real headboard just some support and used a custom upholstered padded headboard there for the view from the cockpit. The sides are cut out of thin plywood and screwed onto the bad (eliminated rails). The rocket engines are upholstered circles I cut.

The main bed is cheap, easy, and quick to build. Designing the rockets, and painting and polying the whole thing are what takes most of the time (along with trying to get everything to dry in my garage in the middle of winter). The fabric, stencils, and paint probably cost as much as the wood.

I thought I had more pics and I probably still have my scribbles for measurements and cuts (if for some reason someone wants them).

Made this little chalkboard shelf/key holder for my niece. She is building a new house and I thought it would look nice in her kitchen or entry way. It was inspired by Ana's "easiest chalkboard shelf from scraps," but I routed the edges of the 1x12 and add different hooks for keys.

For this loveseat, I added a slight reclining angle to the back. I've also made this design with a reclining angle to both the back and seat slats.

The main alteration I've made to the plans is on the bottom. I added a bottom slat and beveled feet by subtracting 3" from the leg length. After attaching the feet to the bottom slat, I taped around the bottom of the foot. I then added a small layer of acrylic resin. This helps prevent splinters when moving the loveseat and helps to keep moisture out.

This is a gentleman's valet that I build for my sister in law's boyfriend as a Christmas present. It was also a good opportunity to try out my hand tool skills, since I cut all of the joinery by hand.