Dresser
![](/sites/default/files/3C4A92A3-820E-4462-8C0F-1B142E47870E.jpeg)
Liked this project. Make sure all the pieces are straight or you will have issues. And having an extra person to help with drawer slides made a huge difference.
Liked this project. Make sure all the pieces are straight or you will have issues. And having an extra person to help with drawer slides made a huge difference.
I saw the Shirley table post and was inspired to build this for our entryway in our new home. Maybe not the best first project to pick in the new home, but man was it worth it! Turned out great. Used some leftover paint from an old painting project and it works really well with our new living room set. I listed it as a weekend project because if you're not super experienced or don't start this early in the morning you will probably need to take your time and finish this over two days.
Build Instructions:
http://www.instructables.com/id/Harvest-Basket-Garden-Trug/
Video of Build:
https://www.youtube.com/watch?v=3DlhZ6-gpak&feature=youtu.be
This is a simple design built from reclaimed wood and purchased ¼” wood slats. It cost very little and only took a couple of hours to complete the build. The goal was light weight, shallow and wide for collecting leafy vegetables, easy to handle and somewhat attractive.
First attempt at a project of this size. 7 middle, armless sections, and 4 corner/end sections. Increased the height of the backs and gave them a slight recline. Didn't have the effect that I wanted. Learned lots of lessons over the course of the month or so I was working on this. 1. Spring for the premium boards instead of the terrible ones you have to pick from for the common boards. 2. Use a stop block on your miter, and cut all your boards before starting assembly. Uniform cuts save lots of frustration. 3. They make outdoor use pocket screws. Who knew? We will see how long the first couple of sections hold up over time. 4. Stain REALLY doesn't stick to glue. Seriously, not even a little. Watch the over application and sand if it you have to. 5. Cushions are EXPENSIVE! 6. I HATE finishing. My wife stained the last 7 pieces.
Taking a break from building for a bit. It's summer, and I'd rather spend it at the pool than sweating it out in my 100 degree garage.
Rustic X coffee table and end table. Used Minwax Special Walnut for the tops and shelves, and Rustoleum Heirloom White for the frames.
I've been wanting a farmhouse table for the past year or so ever since we updated our kitchen cabinets. The thought of spending lots of money on a dining table was not something I wanted to do with two little boys who tend to get a little rambunctious at times! I found the plan for the farmhouse table, sent my husband a text with the link and asked if he thought we could build it. We've been on a roll recently building closet systems, and laundry organizers so I thought I would nab him while he was in building mode. He agreed to give it a try, and we built it this past weekend, with the help of a 2 and 4 year old.
The plans were very straight forward and easy to follow. We moved it inside to build after all the cuts were made (other than the bread board ends) as we knew it would be too large to carry in the house. We also cut 10 inches off the length as we did not have a big enough dining area for an 85" table.
Then we made the large rustic x bench for seating!
I really enjoyed this project! It was very easy and inexpensive. I used Weathered Oak stain to make the pine look aged. I also countersunk all of the screws and used oak button dowels to give it a finished look. I learned how to create the wording and images through YouTube. Search: how to transfer an inkjet photo to wood. Cool trick.
Tue, 12/01/2015 - 04:50
My sister in law would like one of these and I'm wondering what angle cut you used for your support boards? I like the idea of going corner to corner vs trying to get each one centered and not making a mistake. I'm also wondering about spacing and if you kept the measurements the same as "Over The Big Moon" ? Thanks so much!!!
Debora Cadene
First large build I did by myself. Took a long time because I pre-drilled for every screw. Gave this table and bench to my brother. Made new table in hours- no need to predrill except for the 1x4 on the bottom.
There were no exact instructions so the project was just eyed. We used finishing nails to put it together so it would be easy to take apart if a mistake was made, then later we added the screws. Bought a can of rustoleum paint in navy blue. I get pallets for free from my mothers work, and we had screws laying around, so essentially the project was free.
Ask for materials used
We loved the look of the farmhouse x table but my wife liked the slatted look of pallet furniture, so I replaced the 1x12 boards on the bottom with 1x4 cross pieces. I also changed the dimensions somewhat to fit in the space intended for the table so I got rid of the x frames on the ends because their angles changed with the dimensions of he table. Now our cabin looks even more rustic!
Built my in-laws a new pantry closet. I wanted to give them as much pantry storage as possible so I followed Ana White’s slide out pot rack plans. My mother in-law loves the new space saver for her pots!
I loved this plan. Could not find anything else close. There is details on pocket screws from another user. I loved this. I did use plywood but edge the front and rear with a 1x2 (planed thickness to be flush with plywood). I also pocket screwed the 1x2 to the plywood. I loved this and it is way cleaner than exposed corner moulding.
Wed, 05/22/2013 - 06:45
do you remember what color and brand of stain you used and what type of paint for the lettering?
thanks,pam
I built a wooden toy truck using a leftover 1x4 board in my garage. For this build I used Ana White's plans for the wood wheelie cars. This was a quick and easy project and my first project using my scroll saw. Not too shabby for my first go at toy making. However, I am not happy with the finished toy. If I did it all over again, I would take my time with the finish. Also, the driver was not perpendicular to the truck's body when I created the holes for the axles, so the truck leans slightly. My son does not seem to notice its flaws, so I will try to overlook them as well! Check out the blog link for more project details!
Pretty happy with how it turned out. Will take our 4 year year old a bit to get comfortable with the ladder. Wish our room was long enough to add the stairs. Good plans though and thank you Ana White for making them available online.
My son needed a bed for his new apartment and this is the design we chose. The cuts are 1x4 pine stained different colors. He loves the bed!
I fell in love with this bench the moment I saw it, and convinced a friend to let me build it for her! I used 2" brads and glue to hold the woven pieces together. I found it necessary to add a center support under the bench seat to keep it from "creaking." I also used 2" brads to hold the seat slats on; although the instructions say to use 2" screws, *I* certainly don't see how that's possible with the 2x4 supports on their sides underneath! It was a fun build. More info and pictures on my blog.
Slide out spice drawers. Simple build from 1 piece of 1 by 3 and 1/4 inch plywood for base.
I love the way these chairs came out, thanks for the plans. I used pallet wood for the slats and rounded everything over with my router. Also added a 2x4 across the top of the back to give it a more solid look.
Comments
Ana White Admin
Sun, 08/01/2021 - 11:16
Great job!
Love the finish and hardware choice! Thanks for sharing.