Community Brag Posts

Very quick and came together nicely! The only change I would make would be to raise the large bars on two of the sides because our daughter likes to stand on it and balance there (I see in some of the brags that some people did exactly that), but that wouldn't be an issue if she were bigger and the platform were lower (and I imagine that will happen soon enough!). You can see her just starting to try to stand on it in this photo. She is only 18 months old, so I'm looking forward to many years of use!

My friend, who is expecting a baby, asked me to build a changing table for her. She provided me with a couple of things on her wish-list. 1. to have a big enough top to change a baby (of course) 2. a cubby or cubbies for easy access to baby stuff 3. big enough drawers to house all those cute baby clothes. Well, she was given a couple of changing tables and the project just turned into a dresser. In any case, the Patrick Beach Cottage Dresser was a great design to work off of. This was my first build that I made for someone other than myself or my family. Every build becomes my favorite and this one is my newest favorite.

After discovering these plans, I was excited to build one of these tables.  But my little one was not big enough yet, so I've been building them for friends.  When their kids hit 2, I give them a table for their birthday.  All the kids (and parents) have loved them.  Photos showing tables #1, #2, and #4.  Built #5 and #6 this week.  If I can go back and add in a photo afterwards, I'll post table #6 in blue.  Next up, table #7 for my little one.  I might tweak it a little so I can add an umbrella, too.  Thanks for the great plans Ana!

Modified the bench from the plans I got from DIY Pete to curve the back like an Adirondack. Bench given to a Disabled Vet and his wife.

Rob L.

This was the result of another weird space in our house. Our bedroom is actually the smallest bedroom of all four in the house, it's actually intended to be a nursery or a private office off of the Master Bedroom. When we moved in I just couldn't find a layout that I liked for our bedroom to be in the master bedroom, also there was only a single crank out window in that room & while the house's venting is set up for central air there is no unit attached, so there was no way we were going to be able to stay in that room. So we moved into the smallest bedroom of the house & turned the master into our enormous walk in closet, which I just love & the small bedroom is actually very cozy & easy to keep cool/warm. The only problem is there is an outcropping into the room from the old chimney. Well I filled the space under the window with our storage bench but didn't have shelf to fill the other one so I made one from left over wood from building our bed frame. I also had pegs from some shelves that were lost in a basement flood years before so I just measured out & drilled the holes for adustable shelving!

My shopping list
5 1x8
2 2x6
13 2x4
2 2x10
8 1x4

I ended up not using the 1x3 like in the original plans and instead use an additional 1x8. I finished it with an ebony stain.

A white spruce base painted with hessian chalk paint and waxed with furniture wax over the top. Topped off with a section of oak block kitchen counter waxed with dark oak wax

Scrap wood comes in handy when you need to build something quick. Our other end tables are in the garage because our little one likes to tip them over. So this was a quick fix, but we might use it as a writing/ coloring desk later.

This is the sequel to my first kitchen cabinet build, the awesome base unit to the right of the stove. It's another custom design to fit the space (and replace some horribly inefficient metal cabinets that, while cute, really looked like they belonged in a different kitchen). And my first time working with maple and edge banding! Thank you, thank you, no applause please. I'm calling this project "intermediate" skill only because I chose to router the doors and install cup hinges. Otherwise, they're just big boxes on the wall, for real.

The carcasses, shelves, and door panels are all Purebond plywood. The face and door frames are 1x2 and 1x3 maple. The french cleat used to hang the two pieces is also plywood (more on my blog about that). Unfortunately, I don't know enough about wiring to add/move that outlet so that the microwave cord could be hidden...but at least the microwave itself is off the counter! It doesn't have to be perfect to be beautiful.

The wineglass storage is a sort-of take-off on a few other plans on here and some pieces I saw down in Amish country. It's a little rough-looking outside of the cabinet into which it is installed because I didn't design that element very elegantly. Plus I kept changing things on myself mid-stream.

The concealed cup hinges...were totally intimidating. And at first I bought into all the hype about "you HAVE to use a drill press or you'll RUIN your doors", but in the end I just eyeballed it with a plain old forstner bit, and all 6 doors turned out fine! Plus, I got to use Blumotion hinges...you physically cannot slam these doors!!

I'm super proud of this project, and my mother-in-law (in whose kitchen they reside) is thrilled. Btw, the crown moulding is not yet installed, which is why the trim pieces up top look so funny.

I built this bed step by step from the Mom's fancy farmhouse bed - queen sized. I have no experience of building things before this, but bought a miter saw and nail gun. Banged it out in a weekend. More time was spent painting than assembly. I reused the slats from my old IKEA bed. In hindsight, I wish I had a way to even the boards better before assembly, like a planer.

Finally got a chance to try my hand at whitewashing and I just love the outcome!

Built entirely from 2x4 - 22 studs altogether - the tricky part was cutting a rebate into the trims so that they look like 1x4 from the front. adjusted plans to suit australian king size mattress & made everything lower & used plenty of kreg screws to put everything together (inspiration from plans in the book). here studs are sold 'rough headed' - so there was an insane amount of sanding - not helped by the fact that I was a novice to the belt sander. Took the best part of 4 weekends to get it all together

This planter box turned-out looking great! I put it together the first go-round using all kreg-jig screws, but couldn't get the pieces to sit flush with each other, so I took everything apart...and used star-drive screws instead of nails). I have decided that I hate nails.

I used the kreg jig to attach the 4 posts, but then used brackets to attach the rest of the panels -- this worked well! Once I put the slats in the bottom, it was very sturdy.

TIPS: don't be afraid to alter the plan. If you like working with brackets, use them!

I have to say, this turned out phenomenally for me. I set up my whole garage with new shelving, planned it all out so I have very little plywood waste by altering the widths a little. This is by far the best carpentry project I’ve ever completed. Thank you for the great video, and I love the Kreg jig. That made a big different too. Over 2 years since I installed them, and they are all still solid, level, and plumb.

We built this bed in the Cabin style, but we wanted to be able to stack it Simple style. It turned out beautifully!!

My husband and I loved this idea but we don't have much wood working experience. My brother and sister in law were visiting and we decided to make this project together. Our son loves Turtles and we already have a bunch of Teenage Mutant Ninja Turtle "stuff" so we thought that would be a great theme. The guys cut all the wood and assembled and the girls did the painting. Then my brother in law who is super talented added in the details.