Community Brag Posts

Hall Tree by Nancy

I really loved the look of the benches for this table, so decided to change the top of the table to have a side slat. We painted it to go with our porch.

This is the fourth time I have made these to give as gifts. They are just so cute, easy, inexpensive, and versatile. Now that the growing season is among us, Im sure Ill be making even more.

I built this for my granddaughter. I made a couple of design changes because I worked with wood that I already had in my shop. It's select pine with acrylic paint sealed with UV-resistent acrylic laquer. Great plan! Thanks!

This is for my daughter’s 3rd birthday. I decopaged the walls and floor with patterned paper before assembling. I thought it would be easier.

I also didn’t bother with the middle ‘front’ door. The dollhouse in the example photos look beautiful from the outside, but kids don’t really play with the outside of the houses. So I made the windows a little bit bigger.

The windows and doors both looked terrible. My first time using a jigsaw was not a success. So I used tiny dowels for the trim around the door and craft sticks on the inside.

The last thing I need to do is put some lights in it. I ordered some fairy lights on amazon. I plan to use another dowel that I’m hoping I can wrap with the fairy lights and then wedge in the back on the ‘ceiling’ on the first floor and then Velcro the switch to the side of the house. It won’t look professional or anything, but being able to turn the lights on and off will be very fun.

Casey

We had a couple of these bar stools from our apartment-living days. We didn't have a need from them in our house since we have no bar -- so my husband made a small porch table that we DID need.

You can read about it here: http://crabandfish.blogspot.com/2012/06/fish-made-porch-table.html.

Thanks!! :)

We followed the king sized Farmhouse bed with a few changes. We added 5 inches to the footboard so that it was almost flush with the mattress. This was just a personal preference. The bed went together pretty easy and looks amazing in our room. We LOVE it!

Since we did the king sized plans, the side runner boards do not fit inside of the headboard but we did make them flush with inner edge {attached to the front though instead of to the side}. Since we did this, we had to go and buy brackets to attach the side rails to the headboard and footboard. We also had to go back in and cut off the 3 inches that they add to the side rails for it to be able to be screwed to the inside of the headboard. Just a few minor adjustments and it all came together great.

We finished it with minwax dark walnut and two coats of clear coat.

We already had the stain and clear coat so this project cost us about $170 for the wood.

I am a beginner diy'er and this was one of my first projects.  Also it was my first time using the Kreg jig and I loved it!  My shelving system was around 8 feet tall, 12 feet wide and 30 inches deep.  I added some extra cleats to support my deeper shelves (30") and also used thicker (5/8") plywood.  This was a fun and easy project to do!  Thanks so much!

Loved making this. I added a top rail for a shelf.

R Chase

This project was simple as long as you follow directions. I had some problems with the finish but in the end it all worked out!

This is the first project my husband and I tackled since we were in middle school, (when you built things like clocks and puzzles). We had virtually no tools, a limited workspace, and a compact car to transport lumber in. Believe me when I say - if we can do this, anyone can!!!! 

We bought a circular saw and sander, and had a power drill on hand. We were working on a very tight budget, so we bought a Kreg Jig mini instead of a full  sized jig. I also borrowed a few hand clamps from our parents. I thought the Kreg Jig mini would be a MASSIVE pain, but it actually worked really well (as long as you have hand clamps).

We used regular SPF lumber for the planks and aprons and cedar posts for the legs, all purchased at HD. Best advice - take your time looking for boards that aren't warped. Even in the end, we had a couple of imperfect boards, but it didn't inhibit our construction at all like some previous posters experienced. We did all the cuts at home EXCEPT the cedar posts (We got the people at HD to do this for us. They did it for free).

The build was straight forward. We had to do a few modifications (as our table is just over 5ft in length), but if anything I think the smaller size made things easier. We measured twice and cut once. As long as you take your time, it's easy. We even modified the plans so we can add an extension leaf should we need more room in the future.

We sanded every inch of the table. No joke - this step played a HUGE roll in making our table look and feel good. Some of the planks on the table top were a little uneven, so at the last minute we invested in a cheap hand planer - it still isn't perfect, but it definitely helped a lot.

To finish, we used Wood Conditioner. I'm glad we did. I've stained other things in the house without it, but the wood conditioner definitely gives the finish a richer, more professional look. We used Minwax dark walnut, and we topped it off with Waterbased poly (just what we already had hand). 

For our first project, we are very satisfied. It took us about 3 days (off and on). We will be making a bench for our table soon. I look forward to doing more projects in the future! Thank you :)

Quick and easy closet to add anywhere.

I've never thought that I could build any piece of furniture.. then I found a blog called Shanty-2-Chic and it was two sisters who built any piece of furniture you could think of from Ana White's project plans. So this is my first brag and I'm soo thrilled at how they turned out. Of course it didn't run smoothly the entire time.. I had some bumps along the way (that meaning I had to rebuild a chair like twice to get it right). I really don't know much about different type of work tools and all the different size wood and nails... but I did it and I can't wait for my next project!!

I didn't list the time it took because I did a little here and there.. it took me a month or so to complete! I also didn't have a lot of the tools, so price would include cost of wood and tools. I also would like to mention I used the Kreg Jig to build and I love it and would totally recommend it!

We needed a new patio table for our deck and I loved this design. I made it out of cedar which worked beautifully and made a few small tweaks:

- Needed it longer and wider so added two more 2x4's to the middle and added 2x6 end caps (as another poster had done).
- I did not add the holes to the cooler covers for uniformity, they slide in and out very easily.
- I used 4x4's as the legs and constructed the table skirting around it. This is a very sturdy design.

Built some benches for seating and they worked out great.

Overall I loved this build and it was fairly simple. Stained with Penofin deck stain (red label) and a spar varnish for protection.

Hope you like it!

One of two rustic x end tables built for our living room! We also built the coffee table to go with it. All together the wood for the two end tables cost about 65 dollars but that doesn't include stair, jig screws, finishing nails for the x's, hardware, and the black spray paint for the hardware. We used a lot of the same stuff however for the coffee table so it wasn't too bad! they came out great!