Sliding door buffet
I did the top in two pieces of rustic walnut and instead of using bard door hardware, I used black pipe. I made the door frames and the inserts are decorative metal sheeting
I did the top in two pieces of rustic walnut and instead of using bard door hardware, I used black pipe. I made the door frames and the inserts are decorative metal sheeting
I just started building so finding this site was a God send. My wife and I wanted a new bed frame so why not tackle it myself. I loved every part of building it. Now my daughter wants one for her house. I'm happy to do it. I can't wait for my next project
The actual plans themselves came together REALLY well, and several times I found myself saying "How smart is SHE!?" when I would see how beautifully things were put together.
This project was greatly inspired by another user's version. The extra 1x2s on the front and the color scheme. Also, in the plans you are told to use plywood for the back, I ended up using hardboard because it is less expensive and also much lighter. I found the console to be quiet heavy already so this really helped. Finally, the other user stained the top with English chestnut and I used "special walnut".
This was our first real project. We are pretty happy with how it turned out.
Things we learned:
1. Always trim the ends of the stock from the store. We missed one. Twas a bummer.
2. Clamp, Clamp, Clamp. Always clamp before you drill.
3. Sand and Finish all of the cut stock before you assemble it.
4. Drill the sides to the top basket first. That way, if your side is bowed, it will leave a space at the bottom.
5. We ended up using a hand screwdriver to assemble it. If your pilot holes are deep enough, this should be easy and more predictable.
countersink bit is a must have
This was a fun little project to make. The goal is to open the box.
Build Instructions: https://www.instructables.com/id/Nail-Puzzle-Box/
How it work: https://youtu.be/9t4GRjx8-y8
This originally came from a sofa console plan but I added drawers and wheels to make an island.
I LOVE these plans. This was my first project, and although it was a big one to start with, the plans were easy to follow. If I can do it, anyone can. I added the rock wall. My kids and I love it. Total cost for me (including all lumber, nails, paint, slide, etc.) is about $850.
We needed bunkbeds for our 4 and 2 year old before baby 3 came along. We used the basics of the side street bunk bed, combined it with modified plans of the playhouse stairs and then added bookshelves as the headboard and storage bins underneath. It took us about 4 different weekends plus to finish it. We used mostly 2x4s and 2x6s for pieces holding it together and 1x6s for most of the sides. We absolutely love how this turned out! Both kids have plenty of room for books and animals on their headboards. There are skinny shelves at the foot of the bottom bunk for books and the storage bins are awesome for cars, dolls, dinosaurs, etc. The stairs store blankets, toys, misc (there is alot of storage under the bottom bed too...just more difficult to get to...we cut 3 pieces of plywood for bottom bunk so we could access things underneath). The boards underneath the top bunk are 1x10s. The stairs were the most difficult part of this project. Hopefully this bunkbed will be passed down to grandkids! We had a great time building it! VERY sturdy too.
Sat, 02/08/2014 - 06:57
Is there a place to download the plans for this bed? This would be great for my two little ones..
Sun, 04/27/2014 - 18:47
Hi Ana! I love this bunk bed, it's exactly what I need for my boys! Can you direct me to the plans? Thanks so much!
Sun, 04/27/2014 - 18:47
Hi Ana! I love this bunk bed, it's exactly what I need for my boys! Can you direct me to the plans? Thanks so much!
My wife and I made this based, after being inspired by Ana's plan. Very pleased with the result.
Perfect seating for our new summerhouse, loved how easy it was to build. Thanks so much for the free plans and making the easy to follow videos
This was my first building project ever! Even though it took longer than I expected to complete (I have four tiny kids and snagged an hour here and there during nap time over the course of many months), it was absolutely worth the time investment (and wait)! Hanging the doors was tricky (my awesome husband tackled that part), but other than that it was easy to put together. Finishing it was the hardest part by far. If I were to do it again, I'd probably do some preliminary sanding of the boards before putting them together and I would most certainly not use oak (I was talked into it by the HD guys) especially since I ended up painting it. I think it would have turned out just as great if I'd used a cheaper wood or MDF. Thanks for the plans Ana!
This was my husband and mine's first DIY project! We started off using a miter box, and quickly caved and bought a miter saw. We also had trouble getting the X's to fit correctly, so we redid them and made it in a different order than Ana--we lined them up on the boards they would be attaching to and drilled in there. So we didn't make X's and then attach, but rather did it all at once. This made sure everything fit together!
Also, we didn't stain the top pieces of wood before we assembled, and it was hard to get in-between the boards, definitely recommend at least one coat of stain before attaching the top!
Had a great time making this bench, and love it!! Everyone that sees it is so impressed!! We made this one for outdoors, but we are thinking of making another in nicer wood for our indoor dining room table....
With the remodel budget for my powder room only being $300, I needed to get creative with the vanity. The room is tiny, so the vanity needed to fit well in the space and allow us to still move around. I had rescued this board from the dumpster at church when it was being remodeled and kept it in my garage until inspiration struck.
I'm not a carpenter, I try and I'm learning as I go, but the vanity turned out great for me. I made it to fit the $15 Craigslist vessel sink and the little nook in the bathroom. The towel bar was $1 at my local restore. It's nice and sturdy attached to the studs with "L" brackets.
For the tutorial on how I built it using one board, visit my blog.
Submitted by Abigail Marolt on Facebook -
I made a your crib mattress sectional with an extra armless couch to make one large U-shaped design! It was my first project with a kreg jig and a circular saw, but it certainly won't be my last. We love using this couch every day!
This was a present for my granddaughter's 10th birthday. I had to modify the plans so it could be disassembled then reassembles in her bedroom. That required the screws in the side boards, and vertical pegs at the ends of the top rails that could be popped up. I also added a vertical support between the back sideboard and top rail.
It has taken longer than I care to admit to finish this project, but life tends to get in the way sometimes. But it turned out great, there were little to no hickups during the process, and of course I had a lot of fun building this bed!
Thanks Anna for the plans!
I have posted pics of the process below.
Pic 1: All the wood. Nothing smells better than a garage full of lumber! Oh, and please excuse my bulldog mooning you. She doesn't mean anything by it.
Pic 2: Headboard and Footboard finished and leaning up against the garage.
Pic 3: Just making sure everything would fit right. I used the cross-beam from the original bed frame as a guide.
Pic 4: staining in progress.
Pic 5: Finished and installed!
I wanted a bookcase for my son's room that would add some color and be a functional storage unit for his books and toys. I did not buy the highest grade of pine because it would have doubled the project cost and I knew I was going to paint it. The only trouble I had was that the boards were a little cupped so the shelves don't have an invisible fit. I used stock moulding and cut down the base trim to fit. In hind sight, I would have not done the adjustable shelves. I like the symmetrical look of this and can't see myself moving them. I did make a cleat to attach it securely to the wall so that a busy climbing boy wouldn't pull it down on himself.
A slightly modified version of the Modern Adirondack chair. A neighbor walked by and commented that it was a cool new chair. I replied that it had been surprisingly easy to build. He was clearly surprised and asked, "YOU built it?" He's a carpenter and I'm a psychologist, so he obviously did not expect me to be able to build anything that looked even half decent. When he recovered from his surprise, he pointed out all the imperfections and offered advice on how I could do a better job next time... :-D
Mon, 11/22/2021 - 09:27
Great job, love the story behind it too! Thanks for sharing and great finish choice~
Comments
raniel_76
Wed, 12/02/2020 - 12:43
buffet
nice work!