Convertible benches
We love these benches! We actually just leave one of them in bench form and the other in table form for everyday use.
We love these benches! We actually just leave one of them in bench form and the other in table form for everyday use.
This is my first ever wood working project. I had a blast learning how to use the Kreg Jig. I learned a lot!! I finished it in about 6 hours, then sanded it and painted it the next day. It is not perfect, but I like it.
When we moved to our new home, our three boys wanted to share a very small room so we came up with this combination. The daybed is actually two stacked beds because we needed more storage space. We plan to create the desk/shelves under the loft bed soon!
The Ash for this table was sitting at a friends house out in a field for years. There were several 8/4 x 8' boards with various widths laying in the dirt. After many hours of planning and sanding I brought the Ash back to life.
My fiance wanted a new craft desk so I sent her some ideas from Anas site, and she loved this one. I had her pick out paint (bright white by behr) and stain (minwax dark walnut), then got to work. Easy build overall, though I strongly recommend people measure the X brace angles they'll need before cutting them, because using the angles provided in the plan left gaps I wasn't happy with and had to redo the cuts.
I used Ana’s Shepard Kitchen Island plans. Made some alterations per my wife’s request. Added ten inches on each side to store kitchen items and cookie sheets, etc. She also wanted a raise bar on the back and X's on the side. We replaced the wine rack in the middle with a pot and pan slide out rack. Also made the right side bottom door into a deep drawer for her storage containers. Ana’s plans make builds so easy. I appreciate all the plans she shares with us.
Mon, 03/14/2022 - 08:41
This is so beautiful! Thank you for sharing your awesome build!
My daughter's books never seem to end up on her book shelf in a way that she can easily see them. They are usually laying on their sides and stacked in heaps. We needed a way to keep them organized and easy for her to find the books she's looking for. I made two shelves in less than 20 minutes total.
I absolutely love this sectional! It is a little awkward for my pregnant wife to get up and down from because of how low it is but when you are down it is really nice and you can just kick back and relax.
It has its flaws but for my second ever attempt at building something I am very proud. And out of this project I found a great local lumber mill with excellent straight boards for great prices, learned when it comes to something like a counter sink drill bit spend a little extra learned this after snapping both kobalt and ryobi brand and buying the sturdy dewalt that is in my garage now.
After sanding I used Rust-oleum spray paint and sealed it all with two coats of Cabot spar varnish.
Added bonus our Wal-Mart had cushions on sale for 50 + percent off!
Fri, 07/19/2013 - 06:33
Very nice design. Love the cushions (and bargain) you found.
Really great and easy plans to follow. The only thing I would do different is replace all the 1x3's with 1x4's.
Sun, 07/26/2015 - 10:03
The bed looks great, and so does that nightstand! Thanks for sharing!
We used the plan from the basic open base collection. I attached four and left two unattached.
I have to give a massive shout out to Anna White and to all the other folks who did their own variation on the Salsa Console Table.
I started this project before my daughter was born, and needless to say, that turned it from a "couple of weeks" project to a "most of the year" one!
The good news is that in taking my time, I was able to think and re-design and that made the final project so much better! I kept the original idea of a 'criss-cross' wine rack, elevated the drawer/cabinet design with shaker-style joinery, and laminated the top myself (sooooo happy with how that turned out). I made the extra bits of trim around the mid-section and base myself with a router and scraps from the drawer faces (since trim is so expensive at box stores)
Lastly, the finishing involved two of my very favorite products: Benjamin Moore Advance for the body(expensive but diamond-hard finish) and Varathane Poly Stain and Seal (there is just no substitute for slow-drying oil finishes on tabletops - so smooth and rich in colour)
All in all, the project cost me around $600 (high prices of wood during Covid to blame) but there is just no substitute for doing it yourself, and since most solid wood buffet tables run $2000+ I still came out ahead.
Cheers fellow woodworkers!!!
Fri, 04/01/2022 - 09:35
WOW, you did amazing, love the finish choices and all the little details! Thank you for sharing:)
I am going to be making more of these, but I just loved how they turned out. The cushions were ten bucks at Target.
This is a Murphy Bed that I made for my daughter Alicia for their getaway home at Canadian Lakes, MI. Due to limited space i had to make it horizontal instead of the normal way of being vertical. It really comes in handy and takes up very little space.
Fri, 07/19/2013 - 15:17
Looks great! Love the color and the trims you used. Where did you find your hinge hardware? PS- How did you like the baking soda paint? I've tried ASCP which was good but very pricey, and last time made my own with some plaster of paris. Your finish is lovely.
Sat, 07/20/2013 - 18:47
I bought the spring hardware on line. I can't take the credit for the paint as my daughter did that part. She loves the way that the baking soda and paint covers everything and it is a whole lot less expensive than buying the commercial stuff.
Sun, 09/28/2014 - 01:02
I found some cool designed Murphy Bed Collection. Also bought one. Its so cool. Just happy to get that. You also can check this place <a href="http://murphybedikea.com/">murphy beds</a>
I built this for my daughter, and she loves it! Looks great and feels even better to relax in. Now I'll have to build one for me, 'cause she's not sharing
So thankful for these plans! My daughter requested a cabin loft bed that could double as a "crafting nest". I only had to make a few architectural modifications, but I built this by myself in five days, so I would say it's a very DIY-friendly build! My daughter loves it and it adds functional and aesthetic appeal to the room!
I used the 2x4 modern Adirondack chair plans. I made it entirely from old treated lumber that came from a deck I tore down. All decking boards and 2x10 beams that I ripped to size. The finish is burned.
I built two of these benches for under $30 of lumber and supplies. They were great Mother's Day gifts that thrilled my mom and mother-in-law. I will have to upload pics of the other one soon. It's already at the lake house and painted a beautiful barn red.
This is my first real project that I took my time on. Actually my first real project ever. I wanted to replace my Ikea console table because it has started to bow (Ikea furniture does not fend well on moves). I modified the measurements and this is now 24" wide 18" tall - same length. Solid piece of furniture. I could not find all the lumber, but I improvised. Since this was my first project, I could not get the boards to match up all too well, and I do not have a chop saw that would cut a 2x6 - when I placed the 2x6 I did not like the look so I swapped it out with 2x4's.
I used Rustoleum black lacquer spray paint. I like how the grain came out, however, it took way too much spray paint. I will consider using black latex paint next time.
I have since applied 2 coats of poly and sanded it down and steel wooled it - and finally a coat of paste wax to preserve it. If I do not like the imperfections, I just might make it an outside patio table.
Thank you so much for these plans, I spend 3 hours at work looking through all the plans on you site. I even have bought the lumber for my next project - an outdoor table (same design) so that I can use it next to the grill as a counter surface and wire baskets.
***UPDATE*** - I finished the table, however it came out 4" less wide than the old table, however I was able to re-purpose it and use it as an end table for one of the guest bedrooms. The table could have come out a little better, I guess I can only get better!
Again thank you!
This rustic modern version of a pub table has multiple uses - it can rest along a wall to make a 16 foot long bar, or rolled together to form an 8 foot long pub table. It is standard counter height 36" and will accomodate seating for 8-10 counter stools. If you don't have live edge wood slabs, you can also use construction lumber (2x8s or 2x12s) to achieve similar dimensions and versatile use in a more cost effective way.
Fri, 07/31/2015 - 04:10
Awesome idea! I think I will have to try for a dining table version of this table. Do you happen to have a way to lock the 2 pieces together?
Always wanted to build my own bed frame and this was it. Let me start out by thanking Ana, for her great plans. I also wanted to say that even with lumber prices at high prices, does not mean quality lumber! The big box stuff took a lot of prep to become workable. I purchased the 4x4 posts from a local guy with a small saw mill. They were actual 4x4 inch, so some measurements needed to be adjusted.
Very satisfied with the outcome as visible by the inspectors in the last picture! Our plan is to finish it in a flat whitewash finish topped with a matte poly. This piece of furniture is stout and will last generations.
Comments
Ana White Admin
Fri, 02/18/2022 - 12:58
Perfect!
Those look awesome, thank you for sharing!