Community Brag Posts

My 12 year old son expressed some interest in learning how to build things. We looked for several "kit" projects but they all seemed too juvenile to him. In the meantime his "Grandma" (an old family friend) asked me to find her a tray that she could use to carry her cup of tea on so when it sloshed it wasn't running down her arm. I looked and looked but couldn't find one in the stores that had a handle that she could grip. I was very surprised and relieved to find the pefect project: this wonderful serving tray!
We printed the PDF, drove to the store and a few hours later- her tray was finished and my son was hooked on wood working.
Overall it was a very simple project- the thing that caused the some difficulty was figuring out the process for shaping the handle- that grid diagram was very confusing to us, but it may be because we are novices.
Aside from that- we could not be happier and we are looking forward to completing some other projects together.

2nd project. Made this for me! Love it. I bought 5 towels at Walmart for $2.86 each, extra firm pillows for $3.50 each and made the cushions. It is like sinking into Heaven. Glass of wine and a good book. Set for the day. I added another support half way through since people used it as a seat during parties and I was afraid it would sag in the middle.

The table was an after thought. I had leftover wood and and just gestimated measurements.

FYI, I'm a slow project person, so most could probably finish faster than I did.

Thank you so much for these plans! 2 weeks worth of nap time building and my daughter has an awesome new bed! 

I needed a shoe rack that would work for our limited space and the Laundry Tower that was on the brag post caught my eye. It was modified from the Open Frame Laundry Basket Organizer. This shoe rack is working great for our family now! Thanks for this community!

I took Anna's Narrow Farmhouse table and downsized it to make a bench for my kitchen table. For the bench top, I used what I had on hand to make a comfortable seat.

When it was time to re-do my son's bedroom (past time, really), I decided to build him a loft bed to help maximize space in his small room. A quick search to the internet brought me to Ana's site, saving me lots of hassle on trying to design my own loft bed for him from scratch. My son, who loves everything science and is especially fond of volcanoes, wanted a volcano themed room, and I had the bright idea to make the bed itself into a volcano.

I modified the loft plans slightly to create a bookcase headboard - because I always wonder when looking at loft/bunk beds where the kids put all their STUFF (books, reading lights, glasses, special treasures, etc) - but other than that its just the plans from this site minus the rails and with plywood tacked on to the exterior (the plywood takes the place of the rails). The plywood was cut with a jigsaw after it was put up so I could get all the ridges and holes in just the right spot and height.

Honestly, the painting took much MUCH longer than cutting and assembling the bed did, but I think it really turned out well. The inside of the volcano on the cave's back wall is my favorite part. There's still a few things left to do, but no project of mine is ever really completely finished anyway! On on end inside the "cave" under the loft I built a cushioned reading bench and bookshelf, but the other end of the cave is still empty. Eventually it will house a built-in desk that looks out of the lava holes in the walls.

The cave under the bed is so cozy, I've found myself sitting on the reading bench more than once while working on the project, enjoying some me-time when the kids are at school!

We Recently moved into a new house and this project was a great break from the regular work on the house. The instructions were great and easy to follow. The 2 x 6s on the sides makes it hard to use carriage bolts though I settled for lag screws. Can't wait to do my next project.

My kid-o's love to sell lemonade. So, we made a trip to the local hardware store. Because I am terrified to use my husbands electric saw, any wood we purchased would have to be cut with a hack saw and a miter box. And since the stand is to be stored in the backyard, we opted to build it from cedar. We ended up purchasing 8 fence pickets for about $15 total. This was also to be a great way for my kids to apply the some of the knowledge they have picked up this year, our first year of homeschooling. My children, ages 7 and 9, measured all of the boards that needed to be cut. It turned out GREAT! We already had some extra boards, spray paint and screws on hand; so, the grand total was $15.00 for the entire project!

I started this project so my children could use them at the x-desk art table. But as they came together I decided that I would use them for nightstands in our new bedroom.
They are fabulous as a stool or a table I love them.

I used the providence bench instructions as my base, but made the legs longer and the top 1 board wider. It took a total of 7 2x4's. Cheap, easy, and fun addition to my entry way! Thanks Ana White!

This was a labor of love. I built it over a Christmas vacation. It took just under two weeks. The tables between the chairs were made to be removable, so each chair is an individual and we can take apart any of the chairs or tables on a whim. Very happy with this one. Thanks Ana!

I saw this beautiful tongue & groove beetle kill wood at our local Home Depot and immediately knew I wanted to make a bed with it. I had seen several similar headboards on various websites, but just drew my own. I used wrapping paper that had 1" graphs on the reverse side. This time of year, I stock up on this paper and keep for projects. After we drew the headboard on the paper, we taped it to the wood and cut it out with a jigsaw. Then, we routed the edges to give it a more finished look and lightly sanded it. I didn't want the color to change any, so I just sanded it and used Minwax Polycrylic Satin (water based) for a finish). We just attached the side rails with metal braces. We decided to just use this as a frame on the outside of our metal bed frame, but you could put slats in it too. By making it a frame, it's easier to move the bed. We might eventually put slats in it. Anyway, I love it!

I used this plan to build this cabinet space around the fridge. Before this was built, we just had a small dinky counter space and the overhead cabinet. I had to make a few minor adjustments in order for it to fit in the space.

We followed Ana's plans but went 1 ft taller on the pony walls to increase the height. We are so impressed with how it turned out. I'm excited to grow plants in Northwestern Ontario.

My wonderful hubby and I have done 4 projects from Ana-White.com (a bed, a chair, a shelf, and some storage crates). But this was my first solo project!!! I had a blast making it. And just an FYI - the storage area holds about 563 Hot Wheel Cars (give or take a hundred) lol. My little guy loves being able to climb into his big boy bed all by himself. Thanks Ana!!

modeled after the Restoration Hardware Salvage Wood X Base Table which at this 8' table listed for $3395 just for the table. LOL

Used the Fancy x farm table plans and used all 4 x 4 on table, and followed plans for benches with 2x4