Community Brag Posts
King farmhouse bed
![](/sites/default/files/20220413_150544_2.jpg)
Always wanted to build my own bed frame and this was it. Let me start out by thanking Ana, for her great plans. I also wanted to say that even with lumber prices at high prices, does not mean quality lumber! The big box stuff took a lot of prep to become workable. I purchased the 4x4 posts from a local guy with a small saw mill. They were actual 4x4 inch, so some measurements needed to be adjusted.
Very satisfied with the outcome as visible by the inspectors in the last picture! Our plan is to finish it in a flat whitewash finish topped with a matte poly. This piece of furniture is stout and will last generations.
![](/sites/default/files/20220412_194938_0.jpg)
![](/sites/default/files/20220403_114643_0.jpg)
![](/sites/default/files/20220408_195406_0.jpg)
![](/sites/default/files/20220402_124032_0.jpg)
![](/sites/default/files/20220413_195314_0.jpg)
Comments
Single Step Stool
I really loved the inspiration Vintage Step Stool when I saw it but what I really needed was a single step step stool to place in front of the sink vanity in our downstairs bathroom. I have had a cheap plastic Sesame Street one there for the longest time but I hate it because it's so, well, baby-ish! Also, I wanted something that was only 5.5" high so that we could still open the vanity door without the step stool getting in the way and without having to move the step stool first. So, I printed out the plans for the Vintage Step Stool and I played around with it - I drew my version, then drew it again using MS Publisher and printed out a template for the sides. I used a 1 x 8 x 4 to cut the sides and top and a 1 x 2 x 4 to cut three supports. I also splurged and bought a pocket hold jig jr.!! I used a jigsaw to do ALL of my cutting. The completed size is about 9.5"d x 11"w x 5.5"h. This is the first thing that I have ever designed and built myself and I just have to say that I am sooooo proud of myself!! I can't wait to show my dad!
Comments
Tue, 06/07/2011 - 11:14
Perfect fit for your space
Perfect fit for your space and love the finish! Turned out so good! Love it!
Frosted Plexiglass Entry Door
![](/sites/default/files/3154831028_1374703861.jpg)
We gutted our above garage apartment a year ago and have been DIYing as much as is reasonable inside. We installed Allure Ultra vinyl flooring throughout, which is thicker than the old, chipping peel and stick vinyl there was previously. Instead of planing the previous termite eaten hollow-core door with heavy, less-than-secure glass jalousies, we decided to build our own entry door.
We were able to use orphaned 2x6s in my mom's garage and old trim we saved from gutting our apartment. The choices we made amounted to a total of about $150 for this door, including basic door hardware and $70 plexiglass. The hardest part was spraying the plexiglass, as I'm a rather unsuccessful spray painter.
We appreciate having our custom door, and we hope someone else in need of an entry door is inspired to save money and try one out too!
![](/sites/default/files/3154831029_1374703861.jpg)
![](/sites/default/files/3154831030_1374703861.jpg)
![](/sites/default/files/3154831031_1374703861.jpg)
![](/sites/default/files/3154831032_1374703861.jpg)
![](/sites/default/files/3154831033_1374703861.jpg)
Comments
Lockers
![](/sites/default/files/mudroom%20diy%20bench%20system.jpeg)
Lockers for the whole family
Comments
Mon, 01/25/2021 - 14:54
Wrong link
The plans linked is for a piece that is nothing like the picture here. I’ve noticed lately your website has incorrect links, the pdf print option doesn’t work, and the focus seems to be less on the plans and more about selling your pre-cut stuff. Very disappointing.
Ana white seesaw
![](/sites/default/files/35E6D02C-2350-4BF3-A4C8-1FE0CD3BA003.jpeg)
My 11 year old followed the plan and directions by you Ana!!!! We just helped him a little bit and we are so proud of the end project. The kids love it !!!!
Thank you Ana
Comments
Thu, 04/21/2022 - 15:11
Amazing work young man!
He has a bright future, and look at that smile, that just made my day! Thank you for sharing:)
Ten Dollar Ledges
![](/sites/default/files/2011-05-23_17-54-31_361.jpg)
After moving into my new house, I found this great blog and began dreaming of building furniture! I am finally trying it out. Since I didn't know the first thing about power tools and wood-working I wanted to start simple. I bought some 48" pieces of 1x4 and 1x2 in pine, spray painted some old frames and used some of my wedding pictures/momentos and voila...my first project was done! I will be making many more of these easy and pretty shelves! Now to find a wall to put them on.
![](/sites/default/files/2011-06-11_18-27-31_375.jpg)
Dress up center
![](/sites/default/files/3154831122_1374886868.jpg)
I followed the plans for the dress-up center. My daughter loves it and picked out the paint color and princess decals to decorate it.
![](/sites/default/files/3154831123_1374886868.jpg)
![](/sites/default/files/3154831124_1374886868.jpg)
![](/sites/default/files/3154831125_1374886868.jpg)
My version of the Madison dresser
![](/sites/default/files/IMG_4330.jpg)
I made this dresser to replace two cheesy dressers my wife and I had when we first moved out on our own. The style was taken from the Madison dresser design. I added two more drawers as we were condensing two dressers to one and I wanted to ensure I was able to use it!!
Comments
Tent fixed to wall
![](/sites/default/files/66A9640A-05AE-4F0E-BA8E-D4999D2D9B6C.jpeg)
I wanted this to be more permanent and stable so I used two screws each in all the bottom attachments,added a brace in back and secured it to the wall. I used a square piece for the top rail and made the whole shebang equilateral so it’s little more squat and stable.
![](/sites/default/files/F263843C-7C62-4763-9967-62FCCB31B952.jpeg)
Bar cabinet
![](/sites/default/files/bar.jpeg)
My wife wanted a eat at bar/cabinet for the basement family room. So after several design ideas this is what we come up with. It was a pretty simply build, built the frame using Kreg pocket holes to attach everything together. Love the Kreg pocket hole. Then cut the1/4” panels and attached them to the inside with brad nails. The top is a 1 x 24 glue board from Menards. Then some paint, stain and poly , attach the top and its ready to go. I used a water base poly for the top, it is great if you want to apply several layers quickly. Sand the poly after a couple layers with an 800 grit, then apply a couple more then repeat until you are happy with the finish.
![](/sites/default/files/C437F3A1-D323-4F7D-8CD2-A2AE14CA2A94.jpeg)
![](/sites/default/files/C0074BF6-1091-440F-B778-F5326FB28728.jpeg)
![](/sites/default/files/bar1.jpeg)
![](/sites/default/files/bar2.jpeg)
Comments
Easy Rustic Console Turned Shabby Chic Vanity
Why not build this tiny table? It will only set you back about $20! It takes about 10 minutes to build! And the plans are extremely flexible--not to mention forgiving!
But I knew that rustic was not the way to go for my new guest room. I needed something a little more feminine--french-inspired, EVEN! So I decided to stain it ebony and paint over in a satin white. The result was great!
Salvaged Wood Planter
I built a planter box from salvaged wood all by myself in a morning. While the project was a little more involved than I had expected it really encouraged me to keep trying to build new things.
Comments
Luxury Storage Cabinet Design
![](/sites/default/files/ShelvesandCabinets4.jpg)
Best Storage Design For Your Home that keeps your books, clothes and anything in a appropriate way.
Storage Cabinets Design Ideas : http://www.spaceworks.com.au/melbourne/shelves-cabinets
Leaning Wall Shelf
![](/sites/default/files/7D00548D-52DB-458E-B05B-F564D386DFD1.jpeg)
This is my version of the Leaning Wall Shelf by Anne White this project was fun. This shelf was to have a place to keep my Newborns son’s diapers wipes etc. I’m going to build another for my daughter in the near future. I learned a lot from this project, like how to find degrees with a framing square.
Farmhouse Bed, Console Table and Bench!
![](/sites/default/files/shaw1.jpg)
It’s been a couple years, but here a some projects that I made from your plans!
So much fun!
by Shawna
![](/sites/default/files/shaw.jpg)
![](/sites/default/files/shaw2.jpg)
![](/sites/default/files/shaw3.jpg)
Convertable Picnic Table
![](/sites/default/files/table_8.jpg)
I love these benches/table. They were easy to make and are comfortable to sit in.
![](/sites/default/files/table_9.jpg)
![](/sites/default/files/benches.jpg)
![](/sites/default/files/benchwph1.jpg)
![](/sites/default/files/benchwph2.jpg)
Comments
Rustic X Console
![](/sites/default/files/IMG_6606.jpg)
This project was for a wedding gift... My wife gave the young couuple some ideas to choose from and after seeing these plans on Ana White they loved it. Thank you Ana for the great plans!!!
Comments
Modern Farmhouse Bed
$200 build and approximately a weekend to complete with finishing the wood.
Added a tongue/groove plank (6x total)
A 30th birthday gift for a friend.
![](/sites/default/files/261927_10150217143381092_500611091_7090136_1739136_n.jpg)
My best friend's 30th birthday was approaching and she had mentioned that she needed some nice chairs for her front porch. I got so excited when I saw these. So I made her one! Unfortunately, I had a few issues with the prop support, but I think we've remedied it. The dowel kept splitting when weight was bared on it. Now, neither of us are "small" girls, but we're not huge, either! So I replaced it with an oak piece of 1x2. That seems to have fixed the problem, and the corner of the 1x2 fits in between the slats nicely and holds it in place. Sorry the pictures are awful. I'll have a finished product picture up soon. (-:
This was actually my first "real" project. I've fixed several things before and tinkered around with woodworking, but I'm just starting to get into it. I can definitely say that I've found my hobby!
![](/sites/default/files/260560_10150212183376092_500611091_7040041_3240467_n.jpg)
![](/sites/default/files/264829_10150217143791092_500611091_7090142_2944236_n.jpg)
Comments
Tue, 11/06/2012 - 22:10
All great Birthday parties start
All great Birthday parties start with mothering sunday celebration invites. The doesn't just give the recipient the essential information about what, where and when, it sets the tone and soul of the event.
http://www.bestsmsmessages.com/sms-messages/birthday-messages/
Mon, 05/20/2013 - 22:24
There are different type of
There are different type of Birthday gifts you can buy some decorative things also purchase perfumes, accessories it depends on the person likes and dislikes. real throwing knives
Mon, 08/12/2013 - 02:48
This tends to happen in
This tends to happen in situations where the gift is given with an understood or explicit agreement between the giver of the gift and its receiver that some type of service will be rendered often exterior of usual legitimate methods because of the gift. http://bestdaggers.tumblr.com/
Fri, 03/07/2014 - 05:08
Interesting, my opinion is
Though I must say I like the chair, I personally would have reservations about the choice of colours. I think something a little more colourful would be more befitting, maybe something more immature, because people don't like to be reminded that they are getting old, the extent of which depends a great deal on their achievements. With that said, it gives me ideas about what I might decide to give to a friend as a gift.