Community Brag Posts
Eco-Office With Divider
I finally completed all of the pieces for the Eco-Office Desk! Needless to say, I love it! Once I bought the Pure-Bond Plywood for the middle desk and desktop, I wish I'd spent the few extra dollars and used the same materials for the end cubbies. The wood in the Pure Bond is beautiful, and there is really no comparison to the other plywood. I *may* redo the end cubbies in the future, but for now I'm looking forward to using the space.
For the finish on the middle desk and desktop, I used the Satin Minwax Polycrylic, and it looks great. Couldn't be happier.
Farmhouse Bench in 1 day
This was my first build from your site! Farmhouse bench.
I was a little confused with the miter saw instructions "bevel cut at a 10 degree angle off center". I had to google to figure out what you meant. In the end the bench looks awsome and I feel very empowered with my tools.
(still need to stain the finished project, bought all the wood and built in 1 day)
Thank you Ana for sharing your plans!! I love your site and I love my Kreg Jig!
Vicki
(Canada)
Comments
Wed, 04/15/2020 - 11:38
It looks great and rock…
It looks great and rock solid. I can't find a plan for it. Could you please help me?
Barn door media wall suite
![](/sites/default/files/image_919.jpeg)
This was the first thing my husband has EVER built. He's the kind of guy that's better with his mind than his hands, so this is a huge accomplishment for him. We truly love this piece and are proud to have it in our home.
We would like to add crown molding to the top in the near future. Also debating on adding a shelf in the middle to raise the TV so that the TV will sit in the center of the opening.
![](/sites/default/files/image_920.jpeg)
My first workbench
![](/sites/default/files/20200628_170322_1_0.jpg)
This is my first attempt and first woodwook project ever. I used the plans from this site for the workbench with space for a table saw. I changed the dimensions to 4'Wx7'Lx3'H (originally 3x6x2 1/2). It ended up bigger than I imagined though. But hopefully not bad for my 1st shot at a project of this scope. Next step is a polyethylene finish. It looks like the plan has been removed from this site though.
![](/sites/default/files/20200628_161922_0.jpg)
Comments
Cedar Fence Picket Garden Bed
![](/sites/default/files/IMG_3329.jpeg)
I made a couple changes to the plans to better suit my needs, but Ana's plans were my inspiration! And my veggies that were outgrowing their jiffy pots are happy to have a new home!!!
![](/sites/default/files/IMG_3328.jpeg)
Braden Entryway Collection_Modified
This was the first piece of wood work that I have worked on since I was 19; however, your site is so filled with such beautiful work, that I just had to make something.
Luckily we were in need of an entryway--a place to sit and tie shoes, hang coats, and have cubbies to store hats, mitts, scarves, as well as my gardening tools!
I modified your Braden Entryway Collection to fit the space I had, but I hope you agree that it turned out quite nicely, despite my novice alterations.
I'm very fond of the look and smell of bare pine, so the piece is only finished with Tung oil.
Thank you so much for such a rich site, and for an incredibly detailed 'how to,' I don't think I could have managed without it. I also couldn't have managed this without prednisone. I have Lupus, and normally I can't move very much without very severe pain, fortunately the middle to weeks of this prednisone journey left me feeling like superman! Lupus is degenerative so this may be the last piece I make, so I am inordinately fond of it!
The only drawback was that i had to borrow (and purchase) bar clamps, which I found indispnsible.
Many thanks again,
Jennifer
![](/sites/default/files/3154847539_1404008796.jpg)
single seater chair
![](/sites/default/files/6cab613f-da19-4805-9033-f51382b699ae_0.jpg)
Single seater chair to match the sofa
![](/sites/default/files/c52034ae-5a55-4b4e-9d21-d4074cb53215_0.jpg)
Outdoor DIY Grill Station
![](/sites/default/files/grill%20out1pin.jpg)
I saw this table and nesting grill station on your FB page. I changes it up a little bit, but the concept is perfect for my back yard deck.
Dharris
![](/sites/default/files/grill%20out2pin.jpg)
Laundry area table
Work table for our laundry area
Comments
Cedar Spa Bathroom Step Stool
After searching the town high and low for a 10" high wooden stool, I decided to make one. Ana had the perfect stool pattern to modify for our needs - A little shorter, a little wider.....et Voila!
It's the perfect height for little ones to reach the taps in the bathroom, as well as helping out in the kitchen from time to time. And, the cedar smells wonderful.
Finished height: 10"
Top measures: 11.25" x 16.5" (2 boards, cut 16.5" long + a space in the middle)
Footprint: 12.375" x 17.375"
I also lined up the rails (instead of staggering them), similar to the Harriet Higher Chair plans. The joint will be weaker, but I prefer the cleaner lines on such a short step stool.
Thanks Ana for the great plans!
![](/sites/default/files/3154847647_1404186275.jpg)
![](/sites/default/files/3154847623_1404186275.jpg)
![](/sites/default/files/3154847624_1404186275.jpg)
![](/sites/default/files/3154847625_1404186275.jpg)
![](/sites/default/files/3154847620_1404186275.jpg)
Hannah canopy bed full tufted
![](/sites/default/files/image_931.jpeg)
I loved he Hannah canopy bed for my daughter but felt like it was missing something. I decided to tuft the headboard and I used rhinestone buttons to give it that girly look with a small pop of glam. The tufting took probably 12 hours in total but totally worth it. We then followed all the instructions on how to build the bed with the exception of having any screws go in through the sides of the fabric on the headboard. We used plates to hold the headboard in place and screwed around the edges. It was time consuming but we love how it came together.
Barn Door Fridge
![](/sites/default/files/20200706_193135_0.jpg)
My first larger build. Had a lot of fun with it.
![](/sites/default/files/20200706_193145_0_0.jpg)
Hard Wood Waterfall Coffee Table
![](/sites/default/files/hard%20maplepin.jpeg)
Hard Maple waterfall edge coffee table.
Scott
Washer and dryer pedistal
![](/sites/default/files/3154814823_1346826591.jpg)
Similar to: http://ana-white.com/2011/01/sausha%E2%80%99s-washerdryer-pedestals.
Dimensions and finish were unique to my needs.
![](/sites/default/files/3154814805_1346826591.jpg)
$12.00 Cedar Fence Picket Planter
![](/sites/default/files/3154847784_1404432200.jpg)
I followed the plans exactly. The only difference is I used my Ryobi Airstrike brad nailer instead of stapler. Lowes was slightly higher in price than the $10.00 on Ana's post but at $11.97 it wasn't too far off!
![](/sites/default/files/3154847785_1404432200.jpeg)
![](/sites/default/files/3154847786_1404432200.jpeg)
Cedar Top Pub Table
![](/sites/default/files/20161006_133304.jpg)
Ana Whites site is always my first stop for inspiration, she always has good designs and diagrams. I usually use her plans as a rough guide, and then tweak them as needed.
For this table, I made it 42" square, and adjusted the height.
The main difference is I built this from PT pine, and cedar as this is going to be an outdoor table, and I would like it to last. I painted the frame with 3 coats of exterior semi gloss paint, and used Helmsman spar urethane for the top. I did not stain the wood, as I love the color variations of natural cedar.
I also used galvanized carriage bolts to connect the legs. This increased the costt, but I wanted to be able to remove the legs. For more in depth connection details see my blog.
The table turned out quite well, is very sturdy and has gotten quite a few compliments, thanks Ana for the inspiration to build cool stuf! I love building STUFF!
![](/sites/default/files/20161005_161709.jpg)
![](/sites/default/files/20160929_160423.jpg)
Helmsman spar urethane for tabletop
Rustic X Bookshelf
![](/sites/default/files/69DEE2C0-28B4-42DB-A17F-09698F7C3ACA.jpeg)
Added a 2x6 stained top to the bookshelf to add accent .
DIY Barn Style Greenhouse
![](/sites/default/files/green%20greenhouse2pin.jpeg)
I’ve built the greenhouse for your plans, but I love it.
Chaise Lounge by Pallirondack
I saw these plans on Ana White's website, so I figured I would try to make one with recycled wooden pallets. It was a fun and easy project. I added a third set of legs in the center of the chair to provide extra support. Using the pallet wood offered a few challenges, mostly relating to the size of 2x4s you buy versus the ones used to build pallets.
The end user of this chaise lounge chair is going to seal it with a cedar colored stain/sealer so that is matches the Pallirondack Double Settee (one of my other projects) I made for them earlier this year.
Great plans, great fun.
![](/sites/default/files/3154814958_1347133352.jpg)
![](/sites/default/files/3154814959_1347133352.jpg)
4x4 truss dining room table and bench
![](/sites/default/files/3154847911_1404679794.jpg)
This project took a long time since it was my first and I had a baby boy in the middle of completing it. But finally it is finished. I had help with the construction and the plan was modified a little bit (83x38 inches) mostly since it needed to fit in the back of my father-in-law's van for transport to our new home. The finished product came out pretty well for my first foray into woodworking!
![](/sites/default/files/3154847914_1404679794.jpg)
![](/sites/default/files/3154847915_1404679794.jpg)
Comments
Sun, 07/06/2014 - 14:59
Beautiful finish!
Your finish is beautifully smooth! How did you get squared edges on your tabletop boards? Did you run them through a table saw?
Sun, 07/06/2014 - 18:26
Table saw works wonders
Yes, we used the table saw to square all of the edges. This ensures a tight fit on the table top with no room for crumbs to get in!
Sat, 11/12/2016 - 09:41
How did you get tabletop so flat
Did you use wood filler or sand the top to show the wood edges less?