2 Door Corrugated Metal Cabinet
I would love to supply plans, but I just get an idea and "wing it", need to start writing things down! Cost, less than $50.
I would love to supply plans, but I just get an idea and "wing it", need to start writing things down! Cost, less than $50.
I used Ana's Library Base Plan and modified it slightly to include cubby holes on the bottom and an acrylic "window" at the top to create a post office for my daughter. This now also gets used as a "bank" and a "fast food window"! Lots of fun!!
This is my first woodwork project, completed as a team, with my husband. Was good fun at times and frustrating at times! Our wood was thicker by a couple of millimetres out meaning the plans needed to be tweaked.
Table was designed with the chair structure.
We had cushions and covers made to measure (we live in SE Asia so cheaper than UK or US) about £200.
Looking forward to building some deck chairs next!!
Basically followed the plan, but added 4x4 legs and used 2x8s for the long ends to make it a little wider. I used the basic plans for the Farmhouse Bench (http://www.domesticated-engineer.com/2012/05/29/bench-for-farmhouse-tab…) for the bench, but tweaked it to make it match the design of the table.
It was time to upgrade my boy's toddler beds to big boy beds. They wanted bunk beds but I was afraid they'd take turns jumping off the top bunk. When I came across the Sweet Pea bunk bed plans I was so excited because the design wouldn't allow them to jump off the top bunk.
I was inspired by someone else on this feed who built doors. I also tweaked the pergola a bit. I also added extra support to the rear panel framing by adding another vertical post from the top of the horizontal post to the top bunk horizontal post and then another from the top bunk to the bottom bunk horizontal post, both directly down the middle. Probably overkill but felt that was a long run for the rear panel sections. I made my roof out of plywood siding panel and framed it on the back side to keep it from bowing and added support. A few more added elements are a dedicated fan for each bunk, reading lights, and led light strips that flash and fade into different colors.
I had a lot of fun building this and since it's been completed, I've had even more fun building much smaller projects.
Thank you Jenny for sharing your plans on Anna White's website and thank you Anna White for sharing all of your wonderful plans as well!
The first pic is the rustic x with 2x6. These plans are easily modified. The second is the rustic x with 1x material. Both projects were fun to complete!
Wed, 10/06/2021 - 09:37
Thanks for sharing, love the finish choices and the different tops!
This is my first project and I was very excited about doing it. I wanted something unique but something like the Tryde table.
I hope you all enjoy it and get inspiration from this table like I did.
Thank you Ana.
I completed this table with my 5 year old daughter as my assistant. My husband requested a table to put next to our new hot tub to set his drinks on and this is perfect. We only put one board on the top because I felt since it would be outside, I wanted a smooth top. I just screwed it in diagonally from the bottom. I also used spar varnish since it would be outside.
My husband built this with the help and guidance (and tools!) from his dad. Great family project (bro in law and nephew also helped) and bonding experience. It was their housewarming gift to us. My husband did all the finishing work (ebony stain and minwax varnish) and I got to pick out the hooks (anthropologie). We upgraded the wood to oak. LOVE it. Thank you!!
Had some scrap pieces of 1x4 and 1/8'' ply, so I glued up the 1x4s and used a coping saw to cut out the heart shape, then tacked in the plywood behind it. 1x4 is stained in Early American, and plywood is stained in Red Mahogany. Finished in Satin poly. Added a personalized message to the back and gave to my fiance.
We couldn't find the perfect piece that would accommodate a crowd. As always, Ana's easy-to-follow and adaptable plans came through for us! We used a version of the One Arm 2x4 Outdoor Sofa to build this 8x12 sectional.
Tue, 12/14/2021 - 14:06
WOW, that is so awesome and inviting! Thank you for sharing:)
I have always loved handmade gifts, both giving them and recieving them. So when we got an invitation to our friend's 3yr old son's party, I knew the perfect gift. I loved this plan from the moment Ana posted it, but my kids were just too old for it now :(
This was a very inexpensive an easy build. The best part was putting a giant bow around it and taking it to the party. Jax lit up when he saw it.
I had built a few of these chairs a year and a half ago similar to the red ones that you have on the step by step instructions. That was my first time at customer building and painting anything. Needless to say, my skills have improved over time.
So, I wanted to build this chair for my dad for fathers day. He had an old plastic Adirondack chair sitting in his backyard that was really gross. I wanted to replace it with something nice. So he is obviously a UK fan and I wanted to see if I could paint the logo on correctly while also giving myself the opportunity to build something and see if I can make this chair a lot better than the ones I had previously built.
So I decided to curve the back of the chair and curve the ends of the arms. I recently got a nice dewalt random orbital sander which helped out alot in getting it nice and smooth. I made my own wood putty using the leftover sawdust and glue mixed together. I also fastened the wood together using glue and polymer coated screws. Which are supposed to last alot longer than regular wood screws when using pressure treated pine.
I took my time to make sure the pieces were all square when assembled which was better than previous building projects. Also, as far as finishing the chair, I primed it and then put 3 layers of the Kentucky blue Outdoor paint with a brush (which seems like it took forever). I made the stencil by just printing the logo on a piece of cardstock paper. Then I cut out the logo with a razor, then I wrapped the paper in duct tape to make the stencil it a little stronger and to fix the areas that ripped when cutting the card stock paper. Then I cut out the duct tape where the logo is. I made a couple of test paints using the stencil on some scrap to make sure my technique was good. Then once I felt comfortable, I painted 4 coats of very thin paint on the chair where the logo is. After all was dry, I did a light by hand sanding to make it smooth and then sprayed some clear coat on it for an extra level of protection and to make it shine a little.
It was a fun project and my dad really liked it.
Some things I would have done differently for next time would be to use a router to flush cut the seat slats and also use the router to give a nicer rounded edges for the arms and all of the slats as well. Also, It would be nice to mount a stainless bottle opener to the chair to open your drinks (maybe on the outside of the arm of the chair.
Thanks for the plans. I check your site all the time for ideas.
Me and my husband built this table last year. We built everything according to the plans, except we needed it to be shorter. The table is only 3 feet long instead of 5 feet long. We love how it turned out! Thank you Ana for the awesome easy to use plan.
Decided to add a secret compartmet on the bottom of this stand for small personal items. Used piano hinge and cabinet push latch. Wanted to hide the hinge but kept it easy and simple so I painted it black and you can barely see it. This site is amazing and I cant wait to make more projects.
I made this bed pretty much by myself, my hubby helped me assemble it in the bedroom. It is king size so I had to do my own measurements. To my surprise it was pretty easy. Just make your measurements accurate. Had blast. Next project please!
My wife, and I wanted to upgrade my 5yr old daughters bed. Hopefully this will give her enough encouragement to actually sleep in her room!
The bed turned out great, and my daughter loves it!
This project took a little longer than usual, because with the exception of the couple pieces of plywood all the parts are made from rough maple lumber. The longest part was planing, and gluing all the parts up.
This is the second project I made from Ana White Plans. I used some scrap wood so I had to use wood filler to fill in some blemishes so I could not stain the wood. Instead I painted it with a gloss white. It turned out really nice.
Changing table built for my first niece.