Community Brag Posts
Truss 2x4 table with breadboard and framing
I loved this table and made 2 for my husbands birthday...during COVID-19. He and his twin turned 60 and hadn’t seen each other since the quarantine in California...to celebrate with immediate family only I made 2 for our back yard so we could see each other 6 feet apart! So we could be all in this together but socially distant! This was my first project ever! I had to go to Home Depot and point at what I wanted because I sure didn’t know what they were called...but Ana’s clear plans made it possible! Thank you Ana!
I added breadboards and framed it! Both of them!
Bookrack
Super easy bookrack made in an afternoon. Great addition to any childs room or maybe even a smaller version for an avid readers bathroom.
Rustic X End Table
This was my first shot at something more technically challenging than a simple desk. it was a fun project and I will probably going to make a few other pieces that have the metal accent hardware. We love the look of the dark stain (Rust-oleum, Kona) along with the blackened brackets. turns out the Kreg Jig drill bit was the perfect size for the 3/8" bolt I threaded into the lower legs
Rustic X TV console
Built the rustic x tv console table.
Night view paint
Fancy Jewelry Box
12/16/14 UPDATE: Posted a plan for this project, linked in this brag post
This is a variation of the Easy Jewelry Box plan. The completed measurement is 11” wide, 14 ½” high, and 7 ½” deep. This one has a center “tower” with 5 drawers 5 ½” wide, and a wide overhang on the top and bottom, which covers the 2 side doors that open out for hanging necklaces. The drawers are lined with embossed felt, and the drawer bottoms and insides of doors are covered with sticky-back felt. The 2 removable ring drawer inserts are some scraps of 1” foam, covered with scraps of the sticky-back felt, with slits cut into the foam with a utility knife (cut the slits into the felt first, attach it to the foam, then cut the slits into the foam). Cost breakdown: antique brass knobs: $28, sticky back & embossed felt: $14, hooks: $15, wood: $35, hinges: $7, paint: $5. (already on hand: finish nails, glue, sandpaper, left over stain & poly) . I worked on this a few hours a day over a long weekend, probably about 12 hours total. Finishing took most of this time, the build was actually only a couple of hours.
Comments
Tue, 12/16/2014 - 16:52
Fancy Jewelry Box Plan posted
Hi jgg2006, I just posted the plan:
http://ana-white.com/node/13664
Also if you click the orange highlighted link for Fancy Jewelry Box, it will take you to the plan. The full plan is a .pdf attachment to that post, appearing just below "finish used".
:)
Joanne
camp loftbed playhouse conversion
We loved the playhouse loft bed, but not the complexity or cost of materials. Then we found the camp loft bed with stairs. It was mostly 2x4 and 2x6 construction. We then cut out holes in plywood for door and windows then screwed it to the bed frame. The other deviation from the plan was making the stairs steeper we needed them to take less space. We just used 2x6 for the stringer and treads. the stairs are at a 30 degree angle instead of a 45. We also attached the rails using brackets from Rockler. This bed is super sturdy. Beware - it took us about 3 days from buying wood to painted completion. For the paint, we just used semi gloss latex, but my paint person recommended a paint additive called Floetrol to make the paint self leveling and prevent brush marks - it really does work well. Materials including wood, brackets, mattress and paint cost us around $500.
Comments
Wed, 07/06/2016 - 10:16
how'd you get in the room?
Did you leave it in a few pieces and then put it together fully in the bedroom? How big is the bedroom? We are adding a slide and using a ladder instead of stairs. Thanks! Yours looks great!
Handmade by: Joe and Steph
My husband and I made this for my daughter for Christmas. It was a huge hit!
Modified jr. camp loft bed TRANSFORMED my daughter's small room!
This was a labor of love for my 7 year-old daughter. I LOVE the plans, and modified them a bit to make it work in her small room. Modifications include:
-- Made it six inches higher than the plan calls for. My daughter can stand up underneath (probably for another year), and there's still plenty of height for her to sit up on the bed, even with 8-foot ceilings.
-- I added a book case under the stair landing. Again, her room is small, and the goal was to take advantage of every available nook with the room redo. I love how they came out. I used adhesive wallpaper as a shelf liner and on the outside portion under the steps, and reinforced the shelves with a piece of wood that I screwed into the top of the frame (using my beloved Kreg jig).
-- I got really lucky with the dresser on the left side of the bed. It fit *perfectly*. It's a Hemnes dresser from Ikea, in case anyone wants to do the same. My six-inch height addition allowed the six drawer version of that dresser to fit; otherwise the three drawer would have worked. I added the same adhesive wallpaper to the drawer faces to dress it up a bit more... really pleased with how that turned out, too. So much so that I did the same thing to her desk.
-- To give me peace of mind, I added MANY L-brackets on the underside of the bed, and also used two additional 2x4's from head to foot. Every joint was made using my Kreg (did I mention that I love that thing?).
-- Cloud'esque adhesive wallpaper was added under the bed. I like the look, but that particular wallpaper was tough to apply smoothly. If anyone is considering doing the same, I suggest only using thick paper... it won't crease and will save you many four letter words.
-- I strung "fairy lights" under the bed, possibly excessively. :-) My daughter loves them, and enjoys telling Alexa to turn them on/off (by use of a smart plug... they're really cheap these days).
-- I also installed what we call "reading lights" (as they're known to Alexa... separate smart plug) underneath, as that space is now the go-to reading area at bedtime.
-- I painted it white and made the stair landing a grayish brown stain.
I can't say enough about how much I love this site. The plans -- including the ones for this loft bed -- are all easy to follow from both instruction and materials perspectives alike. And the finished products are all great. I also made a desk from plans on this site, and am going to get working on some outdoor furniture soon. This plan in particular COMPLETELY TRANSFORMED my daughter’s small room into a space where the whole family loves to hang out before tuck-in.
The day my daughter inevitably outgrows her loft bed (hopefully several years from now) will be a sad day indeed.
Custom mix of gray and brown stain for stair landing.
Adhesive wallpaper bought at HD and Amazon (for the cloud paper)
Richard's Work Bench
We have been doing some work in our garage and the old workbench had to be dismantled. My husband asked for a new workbench for father's day, but I didn't like any of the ones we saw at the stores. I told my husband that I could build a better one for cheaper and he said ok (although I don't think he really had much faith in it turning out). We bought the wood and then, after putting the baby down for a nap, knocked this thing out in 2 or 3 hours. It was very easy, just straight cuts and screwing the pieces together. I did the whole thing myself with a little help from my brother at the end. My husband loved it and showed off pictures of his Father's Day present to his boss and co-workers. We probably spent about $60 in materials and it really did just take a few hours. I changed the dimensions to fit our space and needs. We had some extra wood left over so we added a back-stop to the top to keep things from rolling off the back and I made the bottom shelf deeper. It was a fun and easy project to do.
Country Pie Safe
We recently moved from Washington state to Maryland and the house we rented didn't have a pantry. I decided after searching pintrest that this would be the perfect addition to the house and it could add to our kitchen storage. I am completely happy with the finished project.
Comments
Very easy for my first project
entryway shelf plans
Farmhouse Queen Headboard
I built this on the floor of my apartment with just a drill for power tools. (Lowes cut the wood for me.) After two years of having the headboard up without stain or paint, I painted it white and moved it into my guest room of my new house. I also made the two little bedside shelves.
Outdoor sofa
Created using the outdoor sofa plans. The cushions were created from 3" foam on the bottom and 2" foam on the back. The color us denim blue stain that was leftover from a previous job.
Double Decker kitchen island
We took the basic plan but made it a smidge higher (36" high) and added a second shelf. The island is longer that the plans, at 60". Provides us space for all our pantry items.
Hall Tree
For the top I followed the plans for the most part. I made this for my mother for Christmas and she wanted shelves under the bench instead of a storage bin so I modified the original bench plans. I purchased the baskets for $12.99 each from "At Home" and the medium size fits pretty good.