Community Brag Posts

Made the bed from wood that I got from the place I work.  It was weathered and rotting.  I was able to work around the rot.  I had to play with the finish to get it all of the bed pieces to match. The bed is really heavy because the wood was full 2" material. The smaller picture shows the actual color of the bed more accurately.

I love the workbench console plans so made them smaller to work as nightstands.

Decided to try and make lamps out of some firewood.  They worked for what I wanted.

Thanks for the plans for this project. I built them for my wife's preschool. I hid the screw holes with plastic wood, sanded and painted over them. I made them a little more sturdy with a brace on the inside of each bench and table. It all turned out great.

Very simple, very easy book holder. Come to find out, it makes a great wine bottle holder as well. The picture alone can suffice as the plans. Enjoy!!!

I modified the plans to make a larger armoire to hand pants and store board games.

Used box store lumber and did a light burn, tung oil and sealant.

Tim H

These are the cubby seats featured on Shanty 2 Chic's site along with Pottery Barn inspired Trestle table. This was a lot of fun to make because it was the first project I did using my hand saw. I normally have the wood cut at home depot. But now I can do it on my own!! you can check them out on my blog: goldhoopstochickencoops.blogspot.com

As a Christmas present, SNC promised LFS a new table, her choice of plans. It's July, and we just ate our first meal at the finished table! We'd looked at a few of the plans around the site, but really liked the angled legs of the Benchright Farmhouse Table, and SNC thought the metal accents would get in some manliness!

We didn't quite read all the comments before we began so we faced the issue of plan directions v. cut list not matching up, which we didn't learn until 10 steps further down the build/assembly. We had a hard time finding non-rounded off edges for the 1x2s, as well. If we'd realized the impact those edges have further down the project, we might have been pickier at the lumber store. Using the Kreg Jig came in super handy on the legs & frames. We picked up a DeWalt kit that had extra long driving bits and just used regular Phillips head screws sometimes.

Since we live in NC, surrounded by hundreds of old tobacco barns, LFS wanted to use reclaimed lumber for the table top. After boards that were too thin, warped, short and generally insufficient for our basic skills and tools, we went to a specialty lumber yard and got gorgeous cedar instead.

We weren't loving the sagging of the end frame 2x4s, so we hid them a bit by making the table top breadboard sandwiched between the end 1x6 cedar boards. We used 1x6 and 1x8 boards for the tabletop.

For the stain, LFS further perused the site and went with a Minwax Pecan stain, layered with a Rustoleum Espresso that got wiped off every few minutes to let the pecan have a chance of peeking through on the legs/base. While we both liked the cedar, the light/dark contrast was too contemporary for our taste, so we used the Pecan on the top as well. The table got 3 layers of Minwax Helmsphar, lightly sanded with 220 grit sandpaper between layers.

The aforementioned first meal had guests at the table and comfortably sat 6 adults who all sang it's praises :) Fun awesome (and sometimes awesomely frustrating!) build, super happy the Christmas present monkey is off our backs, but even more glad to eat dinner at it now.

This rustic console was inspired by Ana Whites console, but I made some minor modifications to make it my own. This is one of my favorite pieces to make. I had some scraps laying around and decided to make this piece.

I loved the plans for this table. My husband and I spent about 5 hours making it yesterday. The plans and instructions are well planned and easy to use.
I've made a few projects from Ana's website, it's always so easy to understand and such beautiful projects.

This was my first build. I wasn't able to find wainscoting so I ended up making my own by gouging a piece of plywood with a screwdriver.

We built two of these beds for our daughters and modified the plan for their full size mattresses.  Also modified the rails for a different look.  Of course their dolls needed matching beds as well :)

We're expecting a baby in November and we picked this as our first Nursery Decor project!

We were originally inspired by the Letter Z project we found on here on Ana's site. So we went ahead and made our own design on google sketch-up. It was a good first project for us to learn how to use Google sketch-up (although we still aren't very good at it).

We wrote about building the project on our blog here: http://thehuth.blogspot.com/2012/10/brought-to-you-by-letter-h.html

This was a fun project and we love the way it turned out!

I've been meaning to build a coffee table for a few months now. About a month ago we received a hutch from some family friends. The back of it was made of 3/4" tongue and groove boards. So, I used those boards to make the top of the table and a couple of 2x4's to make the base. It's got a cool rustic feel that goes really well with the beach chic design that we have in our living room. For the design i really liked the look of the x picnic table, so I modified it for a coffee table.

I modified this plan slightly in how I attached the legs to the table top. I put screw inserts into the bottom of the table so I could screw the legs in and not worry about the wood stripping. We move often and I can't move the whole table assembled. Also, I haven't secured the cross beam, so this table will completely flatten and be easy to pack.