Extra wide shoe bench and cubby area
Modified the cubby plans to just be 5 cubby's wide. My wife wanted white so I dressed it up a bit with the bead board, trim and crown moulding.
Modified the cubby plans to just be 5 cubby's wide. My wife wanted white so I dressed it up a bit with the bead board, trim and crown moulding.
I was tired of browsing the market place and seeing the same traditional farmhouse design coming from just about everyone in the woodworking industry. It seems as though the market place is inundated in the same 4 leg, and cross support design. I designed these to go against the grain. They were my first project ever and were sold within days. They had nearly 3k views within the first 2 weeks on facebook. I am particularly proud of them.
I've never built anything before. Not a single thing. When I couldn't find a bookshelf I liked in any stores I decided to build one and modified the 25 Cubbies On A Wall design to make it something a little different.
I'm stoked with the result.
Thank you for such a great site with wonderful plans.
My partner has now asked me to "whip up" a kitchen island, entertainment unit, more bookshelves and the list goes on.
I might need to look at some more of your plans.
Wed, 10/19/2011 - 16:19
I don't really know how to describe the wood because I'm truly a novice, but here goes:
It's 29cm deep and approximately 2cm thick.
The bottom shelf is 2m long and each cube is 40cm x 40cm. So to build this I got 2x 200cm sheets, 1x 160cm, 1x 120cm, 1x 80cm and 21x 40cm.
I measured and marked then glued and screwed the verticals to the shelves, then used dowel and glue to attach each row to the row below.
I decided to put feet on the bottom so I could lift it above the skirting boards on the floor and have it sit more flush against the wall.
I hope this explains it OK.
Sun, 10/16/2011 - 11:58
looks like 1x12, but you could do it with 1x10 just as well.
That's a slick design, too.
Wed, 10/19/2011 - 16:27
Thank you for your comment. I knew I didn't want a standard everyday bookshelf design and when I saw the "25 Cubbies" design my little head started ticking over and this is what I came up with.
I've seen a few similar things around, but nothing fit exactly what I wanted and there was certainly nothing of this size for a reasonable price.
You can imagine my joy when I found this website and the plans that I could modify to build exactly what I wanted.
I'm really very happy with how it worked out!
Wed, 10/19/2011 - 16:36
Thank you for taking the time to post your comment.
I'm really happy with the end result.
I never thought I'd be able to put together something like this. I always knew I could hammer a nail or put in a screw, but to build something that's actually functional and looks kinda good too, I never thought I'd be able to pull it off.
Needless to say, my confidence is now soaring and I'm looking forward to my next few days off work so I can do some more projects for around the house.
My father has asked me where I get my building skills, to which I reply with a grin that I don't know but I always thought I looked a little like the milk man :)
This project was a lot of work, but was so worth it. It took my husband and myself a month of working weekends and some evenings. We have 2 little girls that adore it. I think the little touches make it perfect. We have not completed the storage boxes, but they are in the beginning stages. We did alter the plans slightly as we liked the bottom doors to open so that I didn't have a tiny hole to crawl into to make the bed. We also made the space under the tallest step a closet area to hang up all their dress up clothes. I think this is one of those great projects you can make your own.
Sun, 10/13/2013 - 12:10
I love the modifications you did on the lower bunk for easier access. And the little touches on the bed slats are fantastic. My girls say they want a bed exactly like this, nevermind that they already have it, haha!
Thu, 10/17/2013 - 08:24
We love this bed! Your plans were fantastic! Although it was a lot of work, it was so worth it. We have 2 friends now that are looking into making this bed for their girls. This bed is a dream come true. What little girl wouldn't want to have this in their room?
The plan had excellent bones, though I modified the top to hold a sink for rinsing and cleaning. It is now painted "San Antonio Rose", and resides happily in the backyard.
Had fun watching husband figure this out. Drawers were tough and trying to antique something for the first time was too. But I am so thankful for it!
Tue, 02/07/2023 - 10:54
Looks like you got it figured out, beautiful job! Thank you for sharing:)
IKEA dresser drawers bit the dust....SURPRISE! So I needed a dresser and quick. Then after a trip to our fire fighter museum I decided to make lockers instead.
I used the basis from the beach cottage dresser, omitted drawers and used shelves and doors instead.
We built this console table after the rustic X coffee table and end table. We have learned from previous experience to cut the "X" last, marking them against the frame instead of measuring to cut. This time, my husband made a suggestion to leave the X's out and it was great! The console table still goes very well with the rustic X coffee table and end table, but without the X, it also fits well into other rooms we can use it for. In the end, we are very happy with the result!
Tripled the dimensions, filled with mums for the fall. Now pine boughs and fairy lights! Love!
I had a different idea for the barn door hardware. I used 1/2" black pipe and fittings for the rail . I found rollers on eBay that were perfect for this application. It went together great and I love the industrial look .
Beautiful Shiplap Fireplace By Adam Morrison
I saw where another builder had modified this plan slightly to have the square top, and I just loved it. We needed a homeschooling space that would be big enough for my preschooler and his little brother. My guys LOVE their table. I had a glass top that I had planned to top it with because I really loved that about the other table too, but as I wash placing the glass on my finished project it shattered in my hands. I took that as the Lord telling me to hold off on the glass top for now :)
This table and chair set is awesome, sturdy, easy to follow and perfect for our needs!
Tue, 10/25/2011 - 11:33
Really great job! Looks like your little ones like it, too.
Mon, 03/26/2012 - 01:36
Hi, I'm on a time crunch trying to get some projects built this week while my husband is off work & before he might deploy! He just built a desk yesterday to provide some work space/laptop space for me & it turned out amazing! The other thing I really want to complete is a kids table/chair set & I was considering your design after seeing the cute picture of your kids & how large the table appeared with them sitting at it. Can you tell me, are there plans for this one & if so, where or what it is called & also how tall your table is & what the length/width of the table top is? It looks like a large work space/surface on top which is something I'm hoping for with a preschooler homeschooling & his little brother to use together when he's older (still a baby for now). How old are your kids in the picture?! I'm trying to get an idea how long this sort of table set might be able to get use before it is outgrown like our current set. Any other tips/help would be great if you have the chance! Thanks so much!!!
Mon, 03/26/2012 - 01:42
Hi, I was wondering if you could tell me where the plans are for this table & the size of your table top Length/Width? It looks like a large space with both your kids using it - how old are they in the picture (I have a 4 year old and an infant). I'm wondering if my 4 year old & his friends would fit this table well with room to grow into it. Anyway, any tips if we were to build this? I have my husband home for a week & he built a desk yesterday that turned out amazing (one of the modular type plans that Ana shared). Anyway, if you are able to respond quickly, I'd love to try to run to Lowe's today & work on this with him tomorrow possibly. Thanks so much!
In reply to Questions by Guest (not verified)
Mon, 03/26/2012 - 05:16
I used the plan for the storage table : http://ana-white.com/2009/11/plan-kids-large-storage-play-table.html. I just modified the top like I had seen someone else do. I believe it was 31" x 31" or something very close to that. My boys are 3.5 and 2 in the photo, and now at 4.5 and 2.5 they both still have lots of room to grow. They love having their little table just for them.
Hope this helps!!! Good luck!
Tue, 03/27/2012 - 04:58
Thanks! I saw that the other builder posted something about 30x30. Would 31x31 also work or would it be too tipsy if leaned upon?! If you get a second, would you mind measuring yours? I love the color too by the way! My oldest is 3.5 right now so that make me more confident that he'll fit the table okay for a while. He seems to be growing fast these days though, so hopefully he won't outgrow it too fast! Thanks so much!
Tue, 03/27/2012 - 08:41
My top measures 29" x 29" actually. It doesn't seem to be anywhere close to tipping when my munchkins are leaning on it, but if you wanted to do the 31" squared, it may be best to add an extra inch or two to the bottom base as well. Just to insure the stability. It shouldn't be too hard to do.
Hopefully this helps!
Used the plans and it came out great. Our daughter loves this chair. Super sturdy.
Finished project for Mikey's bed.
Made a 48x18x27h version of the Little House table to use in a small office . The Wood is Spalted Alder resourced from our WA State property finished with a clear satin urethane top coat. Fasten with pocket holes and glue for the frame.
After our Wal-Mart dining room chairs started falling apart (after 8 years of use) I decided it was time to replace those ugly old things with something a bit more unique. The Harriet Chair really caught my eye, so I set out to build it! My wife, Judi, chose the mustard yellow color and we thought it would be cool to add contrast with some red and white polkadot seat pads from IKEA ($9.99 ea.).
These are the first two I've built, with a goal to eventually build a total of 6-8 to fit around a table I also plan on building.
I made the addition of the front support as Judi likes to rest her feet on it. And, as you can see in the second photo, I added a small brace, cut at 15 deg., on the bottom side screwed to each backrest 2x2, and screwed to the underside of the seat (chair is upside down in photo). This gives additional rigidity and support for the backrest and also provides a nice guide to ensure the backrest has an exact 15 deg. angle on every chair. This was at no additional cost as I used scrap 2x2 pieces for it. And best of all this addition stays hidden and in no way changes the original aesthetic of the chair.
The chairs are extremely sturdy, comfortable and look great in our dining room! The only change I will make on the next set is using higher quality plywood as I had to putty this plywood a bit more than I had hoped. Otherwise, what an easy and inexpensive upgrade to our space!
Fri, 11/04/2011 - 14:59
Haven't been able to add the Kreg to my tool chest yet so I used glue and screws. Pre-drilled all the holes of course. Came out extremely sturdy. This was one of my first projects of this nature so I've learned a ton from each chair I make. These two were the first and the next ones have been a lot more precise and sharp looking.
Sat, 11/05/2011 - 00:59
Thanks for your answer! I'll try it that way too then...
Had to adjust the size of the drawer to fit inside the gap. Chose to lay the shelf on the bottom and attached a 1x2 to the front of the shelf perpendicular to the ground to keep the shelf in place.
I chose not to add the plywood backing because it's not visible, but I may in the future.
Overall a great and simple project, and I'm very pleased with the results.
I LOVE this bench. It's simple and rustic, yet absolutely beautiful. I modified the plans slightly to exclude the long support board along the bottom of the bench and found that the bench is still very sturdy and stable. I love that this bench is a relatively easy and quick to complete project, with such a gorgeous end product!
Made it for a friend who will be on the go with her new baby. I included screw hooks to either hang bags or separate. Tray & box are removable also. Bottoms are chalkboard paint. She wanted to paint it so i will stop here.
Comments
Ana White
Wed, 12/30/2015 - 11:11
I love your entryway! The
I love your entryway! The white is great, the moulding really makes it beautiful! Thanks so much for sharing it!
Ashley.Mac
Sat, 11/26/2016 - 13:51
Attach to the wall?
How did you attach these to the wall?
Ashley.Mac
Sat, 11/26/2016 - 13:53
Attach to the wall?
How did you attach this to the wall?