Community Brag Posts
American Girl Dollhouse Masterpiece!
This dollhouse was super easy to make! Harper (the doll) wanted an open concept living/kitchen, and that is the first floor. Second floor are the bedroom and bathroom. Top floor is the closet. The roof is made from 3.5" slats of luan glued together and painted with black sanded paint. Notice the baseboards and crown molding? The window boxes are really cute, too! I still owe my granddaughter a garage and patio with pergola, and kitchen appliances and chairs, but that will wait until summer when she can help craft/build them.
Harper's bed is modeled after the farmhouse bed plans available on this site, but I used smaller scrap lumber. I wanted milk paint but was unwilling to pay the high price, so I bought a sample jar of antique ivory paint and watered it down. It turned out great!
Farmhouse Coffee Table
Farmhouse collection
Loft Bed
My wife and I completed our son's loft bed in December for his Christmas present. My wife found this bed on Pottery Barn's website and I found these plans on Ana White. Everything was pretty straight-forward. It was a great project and we had a lot of fun building something together. We made a few mods to the plans like height and the railings. I really like how it comes apart for moving and our son loves sleeping up there! Protip: Be careful with the wood glue where the bed is designed to come apart. I got a little sloppy and had to do some hammering to disassemble for staining/sealing. Everything went back together very easily, though.
Economical Basement Shelving 2
I've been organizing our unfinished basement so that my boys have more space to run and ride their bikes over the winter. I needed something to organize our off season clothes and bins of clothes that my boys are growing in/out of. This plan was perfect. It's not my prettiest build but it's soooo functional!
Comments
Joe Shape
Fun and easy project. I couldn't be happier with the end results. Great plan from Ana White.
2x4 Adirondack Chair
Built this with my son after watching tutorial. Very comfortable need to sand and stain. Thank you for the info.
Pub Table and stools
Using the plans for the modern table and simple stools, I made some modifications so it could be a bar height pub table and stools. The stools took the most time, with all the supports and keeping it level. The table was easy and I am super happy with the addition of the x's on the sides. I think it gives it a more professional look. Turned out that the angle I wanted them at wasn't possible on my miter saw, so I just had to mark the angles and cut with a jig saw. Screws were overkill for them and split the wood, so finishing nails did the job. The top was salvaged from an old ugly mdf topped coffee table. I sanded it a bit and with many coats of stain, achieved a match to the rest of the wood. Yay! Breakfast nook, complete!
additional coats of clear matte poly on tops of table and stools for protection.
Comments
Sat, 09/14/2013 - 12:34
What are the dimensions here
What are the dimensions here for your table? I'm looking to make/get one very much like this and trying to figure out the best yet least amount of counter space needed, depth wise. Hoping 15" is enough but I love the look of yours.
In reply to What are the dimensions here by morgo614
Thu, 06/04/2015 - 10:00
So sorry for the delay! I
So sorry for the delay! I don't get notified when there's comments, so I'm just now seeing this. The width is 4', the depth is 15" and the height is 42". Good luck!
Rekourt Dining Table in Distressed Dark Walnut
Hey all my DIY friends!
This is my first build of the Rekourt Dining Table. Big thanks goes out to Ana and Jen for providing these awesome plans.
I think I achieved this table quite well, except for a minor detail where I forgot to sand two pot holes. It actually created a very rustik look to this table. I decided to try the steel wool and vinegar solution combined with the black tea for the finish of this table. I realized it adds so much richness to the wood, it's incredible. The stain is Minwax's Dark Walnut and I topped it off with a Satin Oil-based Polyurethane. The top and legs were also physically distressed using a variety of tools I found in my tool chest. Those included screw drivers, lag bolts, worm hole puch I created out of a leftover 2x4, chains, sanding disc, knife, hammer and much more! That part, although tedious, was fun as it gave me the permission to bang stuff up intentionally :)
For the finish, I first started off by sanding very well, talking hours for the entire table. I then went out and distressed the tops in a very random fashion, trying to not repeat any patterns. As I was doing this, I was waiting for my black tea to seep and be ready for application. I poured boiling water in a large Mason jar and added 4-5 bags of black orange pekoe tea bags. I waited about 2 hours before applying it with a foam brush, very liberally. I allowed the tea to dry overnight and the following day, I applied the steel wool and white vinegar solution. My solution had been sitting for about 5 days, enough to start seeing a bit of rust in the Mason jar. The rusty solution ended up giving the wood an orangy/redish tone, which when seen under the dark walnut, added lots of depth and richness to the color. Once dry and the wood had turned greyish/orangy/redish, I stained it using Minwax's Dark Walnut stain. I did section by section, leaving the stain no more than 3 minutes before wiping dry. I followed this (once the stain was dry) with two coats of oil-based polyurethane in satin (Varathane (Canada's version of the Rust-Oleum poly). I sanded the poly in between coats with 220-grit sandpaper using my orbital sander.
Since then, I have gone out to build about five of these, all in different lengths and sizes, including some with removable bases. The angles in the X's are a little tricky when you don't have plans for a specific size, but I have noted these down based on spacing between legs. If any of you need andgles for specific table lengths, let me know and I may be able to help :)
Let me know what you think and happy building!
Steel Wool (#0000) and White Vinegar
Minwax Dark Walnut Oil-based Stain
Varathane Pro Satin Oil-Based Polyurethane
Comments
Tue, 12/16/2014 - 12:22
One more thing!
I just clicked on your other images, boy would we love to see the turquoise island and that amazing rolling console up close:)!!!!
In reply to One more thing! by Ana White Admin
Tue, 12/16/2014 - 12:31
Island
Thanks Ana! Can I post pictures in these replies?
Batten Boards
This project was pretty easy up until the nail hole patching, caulking, and sanding. It was still pretty easy, just time consuming. However, if you want something to look nice, it is going to take some time. Bottom line, my wife was ecstatic with her new bedroom and that's good enough for me. It went from bedroom to master suite.
Comments
Little Kitchen Helpers
Made two of these fabulous kitchen helpers! One for my niece and one for my own active 2 1/2 yo daughter. She loves to bake with me and is always underfoot while I'm cooking dinner. This has made her so independent, she gathers her own supplies and pushes it around the kitchen to reach whatever she needs. Came out of the shower to find her scooping ice cream into her bowl for breakfast... Thanks Ana!
Rustic X Square Oversized Coffee Table
We could not find a large enough coffee table that we wanted so we decided to make our own. We loved the Rustic X plan and thought if we put two tables toghether we could get the pefect table size for our living room. Project cost us around $120 and it took us a week to complete, but we are happy with the results. The color is a dark expresso.
Comments
Farmhouse Table
I love this farmhouse style. It's 7'x3' and 30" high. I got the plans from Ana white. I just made a few changes.
Kitchen Island
I used and modified the easy kitchen island plans. I put a back on it and extended the top to accommodate bar stools.
Comments
Tue, 12/28/2021 - 18:43
After reviewing the original…
After reviewing the original Easy Kitchen Island plans I’m wondering how you attached the 2x6 boards for the top so it fit onto your base?
Max's Big Boy Bed - thanks to Ana White!!!
My son was finally ready for a big-boy bed and I found the plans for this bed on this website (ana-white.com). My husband and I built it w/o too many problems (this being our first attempt at building a piece of furniture). I stained it with "classic black" stain for a rustic look and my son, Max, picked the "cars, trucks, construction" theme and I ran with it. I installed some rope lighting and a closet rod (along with curtain clips and a bed sheet) for a super cool play area underneath. Along with some vintage signs, new signs, old license plates and automobile decals - my son now has a big boy room he LOVES!
Comments
Sun, 02/17/2013 - 07:20
So cool. It turned out great.
So cool. It turned out great. Bet your son loves it.
Folding Lap Desk Christmas Presents
This was a fun project for my three nephews for Christmas (ages 3, 2 and 2). I thought they'd each like their own little personalized desk for coloring, blocks, snacks, etc.
This was a relatively simple build with the only tricky part being the leg holes (and getting the legs to open at the exact angle I wanted). I had to fudge a couple of them with some patches that you can see in one of the photos.
I would suggest using lock nuts on the bolts. The original nuts I used were turning as the legs opened and closed. I thought that eventually the nuts might work themselves off the bolt.
The frame was built completely out of 1x6 scrap wood I had lying around my garage that had been used for shelves. I cut the 1x6s down to 1x2 and 1x3 with my table saw. I did buy a small sheet of plywood underlayment for the top.
Comments
My X desk with drawer
Here is my version of Ana White's X desk with a drawer. This desk was made out of poplar wood.
Comments
Homemade
built for my mother, for all the grandkids
Grandy console
Made a couple of mods because I didn't want shelves on the two ends and changed to "z" doors. I had a welder make the hardware.