Kentwood Twin Bed
My boys are young, so I wanted to do this without a foot board (I'm always nervous while they play that they'll hit their heads or something). I modified plans from the Hailey bed for the frame, by making it deeper.
My boys are young, so I wanted to do this without a foot board (I'm always nervous while they play that they'll hit their heads or something). I modified plans from the Hailey bed for the frame, by making it deeper.
Love this bed. I found the Cassidy plan and immediately fell in love with the decorative detail of the headboard. It wasn't until I was in the process of buying the wood that I decided to go in a different direction and use wood from my giant scrap piles to create the headboard instead of the wood shims. I followed the plan with a few minor modifications to work with our existing metal frame as opposed to building the one in the plan.
The basic headboard and footboard went together in one day, but creating the design with the scrap wood for the headboard took an entire Saturday. It was time consuming cutting pieces to fit and then staining each individual piece.
I marked this as a week long project because it does take several days to stain everything and then poly it. Most of that is wait time not actual building time.
Tue, 03/03/2015 - 12:22
It was a long, cold Saturday in the garage assembling that headboard, but so worth it!
Mon, 05/04/2015 - 15:40
So can I ask more details on how you added it to the existing bed frame?
First wood project, thanks for the great plans Ana! I made the bottom cushions using 3" thick firm foam, 2" thick memory foam, and 1" thick batting (purchased in bulk and then cut to size), and covered them with outdoor fabric. The back cushions are 4" thick soft foam. I added easily removable/washable drop cloth covers on top of all the cushions. I don't have a finish on the clear redwood, but might add a clear coat to protect it. The memory foam makes this sofa very luxerious!
This was modified from a hose bench plan from Sunset Magazine website. I lengthened the front legs to 20 in and the back support legs to 36 in to accomodate a deeper box. It was made from 1x 6 scrap, a 36 in piano hinge, mdf pre-cut letters and two hinge supports. I painted the letters with yellow spray paint and the bench with two coats of exterior satin green paint. I also added a tray made from 1/8 in luan plywood timmed with 1x3 sides and screen molding sliding on a pvc 1x2. The seat was strengthened with additional cleats for sitting. Peel-n-stick decals
I used the Farmhouse Table plans and just extended the measurements to build an extra-long outdoor table that seats 12.
The one on the left was my first try. I had so much fun making these!
Sun, 07/18/2021 - 12:27
Awesome job, thank you for sharing! Can't wait to see what's next:)
Yesterday I built two of these for my wife and I's room, we just moved from Hawaii to Arizona. The plans were clear and simple, and the end product turned out awesome. Next I will tack the dresser/tv stand. Thank you Ana
I wanted to make this project for my son-in-law for Christmas and use up wood I already had in the garage. I also thought using 2x4's was a bit chuncky for the size of the coolbox, so while I used the idea, I did not really use the plans and made up my own. I only used screws to attach the wood for the two shelves, all the other joints were cut and glue joints and at one point I felt I was making a jigsaw puzzle!
Other changes I made were:
No water drain tap - The drain in the cool box is set slightly above the base of the coolbox. I loved the idea of a tap for the external look of the finished project but for a practical purpose, it is very fiddly to install and you would still have to emply the bottom of the coolbox with a cloth as the water would not completely drain from the box. I did not remove the handles and made the wooden box slightly bigger, just big enough to raise the handle and remove the coolbox for emptying and cleaning.
Decorative Bottle Caps - Instead of putting these on the front, I designed the lid so that it could be covered with a layer of bottlecaps and grout (having first glued the caps on). The provided a surface for putting hot food on should you want to use it as a 'hotpad' (although you would not be able to open it if you did) - but mostly, I thought they would be less likely to fall off, it povides a rain/weather barrier, and futher insulates the box. So the lid in my version is framed with wood, then has a layer of insulation, a layer of 3/4" wood, then the bottle caps/grout.
Bottle Cap Catcher - I added a bottle opener to the side opposite the shelf and attached below it a 1/2 circle terricotta planter which comes with a hole in the bottom to catch bottle caps.
The whole thing was painted in 3 different layers of Anne Sloan chalk paint, waxed and sanded to give it the distressed look.
I have a list of the wood used (with sizes) if anyone wants it. I plan to write the plans up better, but for now this is what I have.
Wed, 03/11/2015 - 15:59
Love the chalk paint! This is a really awesome project!
Used 36 inch legs instead of 32".
Also used two 6x1 inch boards for each side of the box.
This is my version of the Barn Door Snack Cabinet. I made it for my shop/office and was just what I was looking for to add storage space. For the most part I used the published dimensions, but changed the construction method by notching the center divider and using a cutoff from the plywood panel as front and rear stretchers for attaching the top and the face frame. I also used nylon washers for the rollers to make the slide smoothly and quietly. I installed door stops to make sure the door wouldn't slide off the track, I added silicone door bumpers to the lower door guide to avoid wood to metal contact and finally, I ground a radius on the door straps to match the rollers.
Thanks Ana for the inspiration!
I purchased reclaimed 1x4s from a deconstruction warehouse called Re-Use Hawai'i for 20 cents a foot! I cut the lumber to make an un-ordered stagger pattern, experimented with dowel joints to join the cut pieces into 4 ft. planks and used pocket hole screws (hidden by the table legs and supports) to join the planks. I used old salvaged 1x2 window framing for the legs using pocket hole joinery.
I used the plan more as inspiration. Most of the boards are from an old barn and had to be planed down. The cabinet holds 30 bottles. I also found some old hardware on a couple of drawers that were in the barn.
Quick and easy to follow plans. Only issue I ran into was that my miter saw only cuts up to a 50° angle. I set up a jig to hold the 2x2 perpendicular to the saw and set the miter to 30°. Viola, easy 60° angles! Pic attached for reference.
Built for our Firepit.
I built this lovely lego/coffee table for my son, 7 and my sanity at night! This is my 3rd plan I tried from Ana's wonderful plans. (I made airplane shelf and $10 wall ledge before).
Sat, 04/26/2014 - 11:57
Your table is just beautiful!! Question-- do you remember about how much it cost for the wood materials? I am dying to make one soon!
(Also, I would be curious to know which stain you used, it's gorgeous.)
Thanks!
Loved the extra long buffet cabinet but did not need it, however I did need a television stand. Here is my inspired project.
Removed the center drawers and added a glass door, adjusted the dimensions to 60x16x20... and this is what I've created.
Thank you for the inspiration!
I'll be honest I didn't use these plans to build this cooler chest but this was the first place I saw the concept of building a box around a cooler to make a cooler chest so I give anna props for inspiring me I already had an old cooler to use so it helped keep the cost down I also used 1x4 blue pine and cedar fence picketts and repurposed the bottle opener from a growler carrier (in hindsight the bottle opener on a growler carrier doesnt make sense) all told this cost me about $45
I modified the plans and used oak instead of pine. I used black walnut on top is guangzhou on top with white granite strip in the middle
I fell in love with this table as soon as I saw it! I made another farhouse table last year (first table I'd ever built) and liked it okay but I had made a lot of mistakes. The old table is now my work table in the garage- which is great because I needed a bigger work surface anyway! I tried to make my table just like Ana's version but I used regular latex flat paint over the stain instead of milk paint (couldn't find the type she used). I was impatient and didn't want to order it and wait for it to be shipped. I was kinda hoping it would flake/crack a little but it didn't. Oh well, I still really like how the legs turned out. I stained them (and the top) with a 50/50 mixture of Minwax stain in dark walnut and classic gray. I used three coats of Minwax fast drying poly on the table top and just rubbed the legs/base with a furniture wax to give them a little bit of a smooth sheen. I also distressed them a little bit. I like how the dark stain kinda bled through the paint. It really helped to add to the antique effect. I wish I had taken more pictures throughout the building process but I was so focused on the job that I just didn't think about it! Anyway, I just love this table! It was really fun to build and the turned legs take it to the next level!
Thu, 02/01/2018 - 10:37
Love this table!!!! Can you tell me the wood species that you used?Love the stain color!!!
Thu, 02/01/2018 - 10:38
Love this table!!!! Can you tell me the wood species that you used?Love the stain color!!!
I've built several things from the page but this is the first that I have posted about. I love this site. Everything I have built has been so easy because of the way the plans are laid out. I added my own little touches to the buffet but for the most part I followed the plans as they were.