Community Brag Posts

This was my first project. I am pretty excited how it turned out. If I did it again, I would recommend sanding and painting prior to building.

Made a couple modifications:

• Used 4x4 for the cross beams instead of 2x4. 
• Used 4x4 anywhere there were (2) 2x4s together. 
• Used a dowel jig to attach the (4) 45 degree pieces on each post
• Sanded down the table top until the seams disappeared.  Thank you, belt sander!

That last bullet was super-important to the Mrs.  She was adamant that the table should not have spaces in between the boards, yet she did not want any seams for crumbs to collect.  The result was that I had to sand down the table top about an eighth of an inch... but the seams disappeared.

Also, we initially used Ebony stain... until we realized it was too dark.  Sanded that down a bit, then went over top with the Kona stain.  Result was a dark brown with some black detailing.  Finished with some minwax wipe-on poly.  Turned out really nice!

Thank you, Ana - This project was a ton of fun, challenging, and ultimately, very rewarding!

Made a 4 foot version of the farmhouse bench. I also used 4x4s for the legs instead of 2x4s. They work great, just makes the bench a little heavy. 

This was my very first Ana project. It probably took me three times as long as it would take anyone with any experience. That said, we love it! I have since made two more for friends! No need to look too close, there are plenty of mistakes.

I made the Restoration Hardware couch and deck chair. I got really nice Sunbrella material cushions for $60 each at HD. I wanted to make a matching coffee table. I just threw it together. It's a little "jacked up".

I had a half bathroom in my guest room but wanted a second full bathroom, so removed the sink out of the half and installed a shower. I built the vanity in the room and added a make-up area with seating. I used my Kreg beaded faceframe system and to add a bead around the faceframe and built inset doors and drawers. I used Behr paint and used valspar antiquing glaze for the finish. I used the leftover shower tiles to make the countertop. 

One for each daughter for thier bathroom. I did use a wider board on top for larger standing surface and stability. 

I was in desperate need of a mail organizer and knew when I saw the the plans for the numbered cubbies that it would be perfect with some modifications. The best part of this project was that it was free...all from scraps and done in less than a couple hours.

My Husband and I built this for our son's 2nd Birthday. This is our first finished project!
We drilled 1/2" holes for play nails and screws in the legs and top. We also modified the bottom to have a shelf for added storage, just measured the inside dimensions and cut to fit. We also opted for a peg board on the back to eventually hang tools and some baskets for the nails and screws. The peg board is attached to the base and trim with glue and staples. We taped off a section on the back before using the polyshade to allow the glue to adhere.

I used 1 x 10s to make the bookcase a little shallower, and left the back open. Thanks for the great plan.

I made this longer using two 8’ 1x4 pine boards and added a center brace inside. I added a pack of simple hinges to the top so that the face could flip up and we could access the inside. I also routed the face and back.

I have built this console quite a few times. Always trying different finishes. Love all of them. Have to say I always skip the X on the sides, I just get lazy towards the end :) Im in the process of building a couple more, will try to add the X to it this time...we will see :)

We love this little desk for my 3-year-old's room.  She chose the light blue color and helped me paint it.  We used Valspar chalk paint and wax and love the look.  We didn't have room for the double-sided storage so we used pre-made table legs for the other side.  Thanks again, Ana!

p.s. Sorry about the photos rotation.  I have no idea why they are all sideways.  

Substituted the galvanized pipes for heavy grade (Type M) copper pipes for a prettier, warmer look (I'm obessed with copper accents!) 

So happy to have found these plans, and proud of how it turned out! It was even better than what I was hoping/looking to build. (I can't stop staring at it! :) It looks like I paid over $1000 at some high end furniture store like West Elm, but managed to make it for under $200!!!

Thanks Ana White for these plans and all of the others on your site. You have shown both me and my 65 year old mother the confidence and joy of woodworking! (And saved us a lot of money, too!)

We let my son choose whether he wanted a modern store bought play market or whether he wanted help Mommy and Padre (my dad) build one for his 3rd birthday present. We used magnetic primer so he can change the name whenever he wants and added some trim and some tea towel curtains! He loves it!

My spin on the rustic table. Used staircase spindles for legs, cut the side boards to accommodate. Rest of plan was pretty much the same. Wife wanted a big table, thats what she got.

This was such a fun project!! Kudos to Ana White for a great design!! We made several changes, including the dimensions; 10ft X 42-43 in (left the outside edge raw.  Table top is 1.5" thick American Walnut with a semi gloss clear poly, and the base is milled 1.5" thick poplar, stained dark walnut.  The pedestals also have threaded rods vertically drilled through the center beams (one top and one bottom) and used 3/4" dowels sunk into the base and riser for added structural stability.  Finally, the mortise and tenon runner on bottom used dowels to hold it in place and the top is removable using my own fabricated wooden cleats to attach the top in an old style removable way.  All in all; although this was certainly not the cheapest (about $1,500 all things considered) or simple (although comparable materials and craftsmanship would cost about 3x what I spent); this table is bullet proof and beautiful!! Thanks for the inspiration Ana!!!