Community Brag Posts

Marlee's Kitchen "Just Like Grammie's"

Submitted by Laura Fama on Mon, 01/02/2012 - 06:05

I started this project months ago... hoping to give this to Marlee for her 3rd birthday... that was September. Here it is... 99.99% complete... 3.5 months past the deadline... Just in time for Christmas. I used the plans for Grace's Kitchen pieces with some modifications. I extended the cabinet for the sink... gave her a farmer's sink... and extra counter space. What kitchen doesn't need additional counter space??? I left it open storage for now... I wanted to add doors... but ran out of time... ha ha... The oven I added the drop down door below the oven compartment for additional storage. I painted the burners on her cooktop.. just like Grammie's... I couldn't find the handles I wanted in black... I had to buy the stainless ones and prime and spray them black... that was pricey ... The fridge has 5+ coats of magnetic primer under the stainless steel paint. I got a pic of an icemaker/water dispenser from the web and Mod Podged it to the freezer door. I had just as much fun shopping for her supplies as I did making the kitchen. Most of the food products are from Melissa & Doug... and mostly all made of wood!! Too bad she's only here a couple nights a month.... maybe I might have to have my own friends over to play when she's not here!!! Thank you Ana... once again I owe it all to you!!!!

Estimated Cost
$150-$200
Finish Used
Rustoleum Magnetic Primer
Rustoleum Stainless Steel Paint
Sherwin Williams Caviar paint
Recommended Skill Level
Beginner

Comments

laurakc181

Mon, 01/02/2012 - 08:31

This is probably the best one I have seen! Honestly - the fridge is fantastic and that sink is insanely awesome! I am jealous now lol....I am sure she loves it and who says YOU aren't allowed to play with it while she is not there ;)

Laura Fama

Mon, 01/02/2012 - 19:12

Thank you. That's very nice of you to say, there are many beautiful sets on here. Yours is very nice too. I love the grill on your stove. That's a great addition.

Jaque (not verified)

Wed, 01/04/2012 - 21:06

THAT IS AMAZING I LOVE IT!! I may take some ideas for myself I have 2 little girls and I think the extra space would be perfect for them so they dont fight over a little space. I JUST LOVE THIS!!!

Laura Fama

Thu, 01/05/2012 - 18:31

I think the extra space is going to work out well. My granddaughter is already using it and if she didn't have it, I suspect she'd make my play sandwich on the floor!! I would like to make another piece, for additional storage and maybe a microwave, but I'm running out of space in her room!!!

Guest (not verified)

Mon, 02/06/2012 - 19:08

Could you please tell me the dimensions of your sink & counter? Thanks,

Lotus (not verified)

Sun, 08/19/2012 - 10:30

Where did you find that cute sink? Id love to make this for my daughter, you did a great job.

Laura Fama

Sun, 08/19/2012 - 18:35

Thank you, I built the sink. Just made a box and painted it with stainless steel paint. I really winged it with the sink. The counter top is two boards that were scrap from the fridge joined with pocket holes. I splurged and bought the faucet.

DSalvagni

Fri, 08/23/2013 - 09:22

I love your kitchen set at first i thought it was the real deal. the stainless on black looks amazing what paint did you use to get the stainless color? also what did you use for the stove knobs they look real Great job.

Laura Fama

Thu, 01/08/2015 - 07:20

Sorry this reply is so late...I used Rustoleum stainless steel paint. It's awesome. The knobs are real. They're replacement knobs for a range, sold at Lowe's. I was able to work with them and they actually turn.

Lily's Library Cart

First project of yours that I built. Came out so much better than I expected.

Estimated Time Investment
Week Long Project (20 Hours or More)
Finish Used
Valspar White Paint
Recommended Skill Level
Intermediate

Triple Pedestal Table

Submitted by Anonymous (not verified) on Fri, 02/05/2016 - 18:33

Brazilian walnut flooring top from lumber store and pine everywhere else. 

Estimated Cost
About double because of the Brazilian walnut top. $300
Estimated Time Investment
Week Long Project (20 Hours or More)
Finish Used
Triple thick clear varnish 3 coats lightly sanded in between coats.
Recommended Skill Level
Intermediate

modern bar stools & outdoor chairs

Submitted by Anonymous (not verified) on Sun, 08/18/2019 - 17:19

great plans, thanks! a girl can do. used scrap 2x4s from a concrete pour for the bar stools (ran them through table saw) and leftover 2x12 cutouts from pool deck framing so they are not as perfect as with new wood but it’s great to recycle

for the outdoor chairs I used scrap 2x4s as well but for the seat went with new 1x4

Estimated Cost
all scrap wood
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
stain. mixed 3 parts of “onyx” & 1 part of stonehenge to get to that grey (did not like the grey they had)
Recommended Skill Level
Beginner

Fancy Jewelry Box

Submitted by dland41961 on Fri, 05/05/2023 - 07:59

Fancy Jewelry Box it came out very nice. Made with white oak.

Built from Plan(s)

Comments

Squared2 Headboard

Submitted by amysparkie on Wed, 01/04/2012 - 16:24

I build Anna's version of this popular store's headboard. I love it! Cost includes wood and paint. I would have used poplar for the entire bed but my hardware store only had 2x2s and 2x4s in white wood.

Estimated Cost
$75
Estimated Time Investment
Day Project (6-9 Hours)
Finish Used
The paint color is pond by eddie bauer color matched at benjamin moore. I used a HVLP paint sprayer to paint and a semi gloss paint thinned with a water based product (you can just use water and floetrol).
Recommended Skill Level
Beginner

Farmhouse table American Walnut for Friends

Submitted by ksmith311 on Thu, 11/21/2013 - 12:57

We built this table for some friends and the build went great!

She brought over a table leg so that we could try to compliment their existing stain colors. I used "American Walnut" when maybe I should have used "Special walnut". It turned out a little reddish and I'm worried that she wont like it. I think it's beautiful but I'm so nervous!

What do you think about the finish?

Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
American Walnut and Minwax poly in satin (3 coats)
Recommended Skill Level
Beginner

Comments

spiceylg

Fri, 11/22/2013 - 09:54

Don't worry, it came out beautiful and the finish looks fine! They will be happy and thankful for your efforts. Besides, the style these days isn't to be so "matchy matchy" anyway. Great job!

Barnwood Narrow Cottage End Table

Submitted by kcragun on Sun, 02/07/2016 - 20:52

Inspired by the Narrow Cottage End Tables plans. Tapered the legs a bit at the bottoms. Added a bead to the top and bottom of the drawer front. I finally used a 100 year old board salvaged from a barn in Tennessee that suffered a fire - giving the white oak a great dark patina. There is a shop in Orange County, CA called True American Grain that sells reclaimed wood - I bought the board for $40 - it adds a lot of character to the finished project.

Built from Plan(s)
Estimated Cost
$50.00
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
Painted the base using Annie Sloan chalk paint in French Linen. I brushed on and wiped off a glaze from General Finishes in Van Dyke Brown. I used wax as a top coat on the base. For the top, I did a lot of sanding, but kept the old saw marks. I also used Tung Oil on the top, to protect the wood without a high gloss finish.
Recommended Skill Level
Beginner

Comments

Jurassic Park Cabin Bed

Submitted by Anonymous (not verified) on Tue, 09/03/2019 - 07:36

My son is really into dinosaurs so I thought I'd make him a Jurassic Park themed cabin bed. This was a great plan and my only regret is that I didn't paint the pieces of the roof BEFORE assembly. I definitely spent the majority of time on finishing but it came out wonderfully and my son is totally in love with it!

Built from Plan(s)
Estimated Time Investment
Week Long Project (20 Hours or More)
Recommended Skill Level
Intermediate

Washer Dryer Pedestals Bases

This pedestal base for the washer and dryer really created the perfect opportunity to organize and declutter our tiny laundry room. Had to resize it a bit to fit the space but it turned out perfect! I added a super easy top for an even counter space and bought some stock laundry room cabinets to sit in the back for extra storage. Such an upgrade!

King Size Farmhouse Storage bed from 2 Ana White PLans

This was my first build! I combined 2 of Ana White's plans, the King size Farmhouse bed with the Queen size storage bed, I didn't do drawers as the cubbies worked better. So this was a nice merge of two of the plans! LOVE LOVE LOVE our bed, and the 2 tone stain/paint combo.

Estimated Cost
$750
Estimated Time Investment
Week Long Project (20 Hours or More)
Finish Used
I stained the headboard and footboard with Minwax Dark Walnut and then used a cottage white paint for the "white" portions. then finished with a satin polyurethane coat over everything.
Recommended Skill Level
Intermediate

Comments

joshuaaslocum15

Mon, 11/25/2013 - 07:53

My wife asked me to find a bed idea for our little girls room. She said she wanted her to have a bed with storage. Well I think I found the bed I am going to build her. Now the fun part making it into a twin size! I like it so much I am going to build one for us in our bedroom. Again I love it great job!!!

KansasDad12

Thu, 04/17/2014 - 08:43

Was just curious if you actually spent $750 building this or if that was a typo? Would really like to build this same bed with the except of using drawers. Nice work!

In American Walnut

Submitted by Anonymous (not verified) on Wed, 02/10/2016 - 12:40

Rustic X Coffee Table done in American Walnut. Top was planed and joined for smother surface.

Built from Plan(s)
Estimated Cost
$600
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
Clear Poly.
Recommended Skill Level
Intermediate

Potting bench

Submitted by Anonymous (not verified) on Sat, 09/21/2019 - 08:52

My good friend asked me to build her a potting bench for her garden wedding reception. She shouted me a photo of one from the internet. I used your plan and made a couple modifications. This is the color she requested and I used Cabot solid stain. I’m not a fan of solid stain and won’t use it again. She loved it.

Built from Plan(s)
Estimated Cost
$85
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
Cabot solid stain

Vanity Hutch

Submitted by billwentz on Thu, 05/18/2023 - 13:48

Bathroom had a huge mirror. Looked like it required 2 men and a small boy with proper tools to remove it. So a riff off the vanity plan covered 2/3 of the mirror and made for a much nicer look.

Comments

Ella's Loft Bed

Submitted by natehu on Sun, 01/08/2012 - 20:46

My daughter loves her new bed, thanks Ana!

The plans were well thought out and very easy to follow. I did make a few changes/modifications that others might want to consider.

I used select pine boards to cut down on the amount of sanding necessary prior to paining, however that boards have a fairly sharp edges. Because this is a kids bed and play area underneath I rounded off all the edges with a 1/4" round over bit in my router. I love how it turned out!

I also added two 1x3 supports to the long 1x2 top back rail. I did this for two reasons, first was the 1x2 seems a bit saggy and didn't seem like it would hold up too well to my 6 year old up there. Secondly, it match the front rail nicely. Speaking of the front rail, I also changed the vertical supports from 1x4s to 1x3s. The 1x3s match the 1x3 posts and look much better IMHO.

When I built the ladder I was struggling with the gaps left by the 1x3 stair treads when I placed them in the 1x3 sides. Finally I decided to use 1x4 treads, again rounded over with a 1/4" bit. These larger treads overhang the 1x3 sides by about 1/2-inch and look very nice.

Finally, instead of screwing the ladder to t 1x8 bed frame, I bent 5" corner brackets into a "J" shape and attached them upside down to the top of the ladder. The upside down "J's" hook over the top of the 1x8 bed rail and allows the ladder to be easily removable yet is still securely attached to the bed for use.

Built from Plan(s)
Estimated Cost
$300
Estimated Time Investment
Week Long Project (20 Hours or More)
Finish Used
I finished it with a coat of latex primer followed by a couple coats of an off-white latex paint.
Recommended Skill Level
Beginner

Comments

DanKaren

Mon, 01/23/2012 - 14:12

Wow!!!! Saw a similar bed at a kid's furniture store for about $2,500 in NYC. Thank God I came across this site before plunking down that amount of cash.

Well Done!

Mary - Scentsy… (not verified)

Sun, 02/26/2012 - 21:47

Is this bed as tall as the original design specified? For some reason it seems shorter to me. We have a ceiling fan in my childrens' rooms and average height ceilings. I am concerned with making something too tall.
Thanks.

natehu

Wed, 07/11/2012 - 07:59

Mary - No, I had to shorten the bed by about 3 or 4 inches because our ceilings are lower than 8' in the basement. The only real challenge with changing the height of the loft is re-working the step spacing on the ladder.

Media Console from The Handbuilt Home

Submitted by Shorty on Wed, 11/27/2013 - 08:38

We built this media console because our old TV stand was pretty much a safety hazard for our soon-to-be mobile baby. We found a good plan in The Handbuilt Home and modified it to our dimensions with the help of Sketch Up. We couldn't be happier with the final product!

Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
Primer & Behr's Swiss Coffee in Satin
Recommended Skill Level
Intermediate

Antique hardwood flooring Husky Farmhouse Table

Submitted by Anonymous (not verified) on Fri, 02/12/2016 - 17:52

Found 120 year old mahogany hardwood flooring at The Old House Society that provided the table top. Built the subframe and legs per the standard plan. Then attached a 3/4" ODF plywood deck. Strip hardwood was nailed to the top with 1" finishing nails thru the flooring tongues. Cleaned the hardwood, applied 2 coats of shellac and 3 coats of satin polyurethane. The modification to use the strip flooring was the most tedious to get a tight fit. The antique, aged and stressed flooring gives the table a real antique look. Build time was @ 8 hours. Applying the finishes took several days of drying/curing before use. My wife loves it and I am proud of the final project.

Built from Plan(s)
Estimated Cost
Legs from Osburn Wood Products @ $55.00 each plus shipping. Mahogany subframe parts @ $50.00. 4 x8 ODF 3/4" plywood @ $ 65.00. Re-cycled strip flooring @ $250.00. Finishing materials @ $30.00. Total @ $550.00
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
2 coats of shellac. 3 coats of satin polyurethane. Used Golden Mahogany stain to cover cut edges and scars. Amy Howard linen paint on legs and subframe. 1 coat of light antique wax first. 1 coat of dark antique wax final coat on legs and subframe.
Recommended Skill Level
Intermediate

Barn door mirror shadow box

Submitted by Anonymous (not verified) on Tue, 10/01/2019 - 17:58

I built my wife a barn door wall mirror for our anniversary. But then got this crazy idea attach a shadow box to display wedding dress. Project get wedding dress out of closet!!

Estimated Cost
$200
Estimated Time Investment
Day Project (6-9 Hours)
Finish Used
Walnut
Recommended Skill Level
Beginner

Comments

Kids Picnic Table

Submitted by bkb on Thu, 05/25/2023 - 05:27

I made the picnic table for my grandchildren. The plans were great and so easy to follow. The cuts, measurement are perfect. Table is sturdy and came out balanced! I used water based paint. Thanks for the plans!

Built from Plan(s)
Seasonal And Holiday

Entryway Shelf Modified

Submitted by Radcrafter on Wed, 01/11/2012 - 17:06

So easy to build and soooo functional. The plans include both the bench and the shelf, but I just didn't have any room for the bench or I would have built that too.

My wall was too short to fit the original shelf, so I modified this to work with the space available. It's about 10 inches shorter and only has two cubbies.

This is a great starter project.

Estimated Time Investment
Afternoon Project (3-6 Hours)
Finish Used
Two coats of Mined Coal on the exterior and two coats of an oops blue (sorry) for the interior of the cubbies. Protected with three coats of polycrylic.
Recommended Skill Level
Beginner

Comments

romaida

Sun, 01/03/2016 - 18:14

Hi!  Love your modified shelf!  Can you give the modified cuts?  I would love to make this!  Thanks!

jscott

Mon, 01/04/2016 - 02:59

Hi there, where do you find 4x4 yellow pine?  All I ever see at big box stores is treated lumber posts.....

Outdoor Bench Ted Moyer

Submitted by ted1735 on Sun, 12/01/2013 - 17:23

Easy bench to build with my son! added double legs for more stability, just glued two together and followed all directions.

Estimated Time Investment
Day Project (6-9 Hours)
Finish Used
Flood Cedar Transparent 2 coats and 3 coats of Helmsman Indoor Outdoor Spar Urethane
Recommended Skill Level
Beginner