1. Home

Community Brag Posts

Chaise Lounge Chair

Submitted by dsipe on Mon, 05/18/2020 - 13:34

This took way longer than anticipated. I didn’t account for how much time would go into sanding, priming and painting the wood. Also, the plans were changed to use 2x6’s but didn’t take that into account for the stop block. Still trying to figure that part out when fully reclined. Other than that, it turned out really good.

Built from Plan(s)
Simplest Wood Chaise Lounge Chairs
Estimated Cost
$65
Estimated Time Investment
Weekend Project (10-20 Hours)
Recommended Skill Level
Intermediate

Small Day bed

My niece is here for the summer! We needed a guest bed fast, that didn't take up an entire room! She chose this day bed!

Her bed is in the computer room, so there isn't enough room for a twin size bed. I modified the plans to fit a standard crib mattress. Now, when she isn't using the day bed, it doubles as a lounging spot to read. It is soooo cute!

For the storage baskets, I cut shipping boxes to size and mod podged fabric to them, and added some cute little knobs.

Built from Plan(s)
Storage Daybed
Estimated Time Investment
Afternoon Project (3-6 Hours)
Finish Used
Early American by Rustoleum followed by 2 coats of satin poly
Recommended Skill Level
Beginner

Comments

Sam's New Loft Bed

Submitted by blouden on Fri, 07/13/2012 - 23:18

Built my daughter the day bed, and my son needed his own bed. But with a 2 bedroom house they have to share a room for now. So I seen the loft bed and well this is what I came up with. I stained it cherry, and routed the edges to give it a little touch.

Built from Plan(s)
How to Build a Loft Bed
Estimated Cost
$80
Estimated Time Investment
Week Long Project (20 Hours or More)
Finish Used
Cherry Stain
Recommended Skill Level
Intermediate

Comments

TommyHawk

Fri, 12/20/2013 - 07:57

This looks great! I like the way you kept it simple yet more rustic type appeal without adding the top board (laying flat).

TommyHawk

Fri, 12/20/2013 - 07:57

This looks great! I like the way you kept it simple yet more rustic type appeal without adding the top board (laying flat).

Twin Panel Bed

Submitted by Luckysme on Thu, 05/01/2014 - 12:45

Thank you so much for these awesome plans. When I saw the original twin panel bed, I knew this was exactly what I wanted to build for my two daughters. I love super high head boards, and these are exactly that. I am in love. I did make some changes to the plan. I went with taller side rails, and used metal bed rail brackets. The brackets were super important. We move every few years being in the military, and I wanted something that would with-stand time and moves. I am also quite impressed how solid these beds are. I could never find anything this amazing in a store. I would also like to thank my husband for his help. It was our first build, but definitely not our last. Thank you!

Built from Plan(s)
Twin Panel Bed
Estimated Cost
200 per bed.
Estimated Time Investment
Week Long Project (20 Hours or More)
Finish Used
I used Annie Sloan Chalk paint. Paris Grey, and Old White. First I Clear waxed it, then finished it with a dark wax. This gave it more dimension.
Recommended Skill Level
Intermediate

Comments

spiceylg

Thu, 05/01/2014 - 18:02

These came out beautiful and especially for a first build! Seriously impressive. Love the whole ensemble. Really pretty.

Danib

Wed, 06/11/2014 - 13:31

This bed is beautiful. You did a wonderful job on it. Could you please tell me where you got the big base molding for the inside of the headboard and footboard? Would love to try this for my granddaughter.

Luckysme

Wed, 06/11/2014 - 17:27

Thank you for your very nice comments:
Here is some info, let me know if I can help further more.

This is what we used for the base molding and the headboard molding at the top. http://www.homedepot.com/p/House-of-Fara-5-8-in-x-4-in-x-8-ft-MDF-Base-…

For the the inner molding we used two pieces of molding: This is the style (link below) we used, but ours was a little bigger, 5 1/4 inches. Couldn't find it on the home depot website, but this is exactly the same style.

The addition molding below is a finishing molding that we had to use since the above molding was not flush to the back board. It finished really nice. Glad we added this addition dimension. You can easily skip using it with different "above" molding.

http://www.homedepot.com/p/American-Wood-Moulding-LWM47-9-16-in-x-4-1-4…

http://www.homedepot.com/p/American-Wood-Moulding-WM100-11-16-in-x-11-1…

For the side rails we also used 10 inch boards. I thought it made the bed look more proportioned. I will add additional pics of the molding, so re-check pictures. Again, let me know if you have further questions.

Luckysme

Wed, 06/11/2014 - 17:27

Thank you for your very nice comments:
Here is some info, let me know if I can help further more.

This is what we used for the base molding and the headboard molding at the top. http://www.homedepot.com/p/House-of-Fara-5-8-in-x-4-in-x-8-ft-MDF-Base-…

For the the inner molding we used two pieces of molding: This is the style (link below) we used, but ours was a little bigger, 5 1/4 inches. Couldn't find it on the home depot website, but this is exactly the same style.

The addition molding below is a finishing molding that we had to use since the above molding was not flush to the back board. It finished really nice. Glad we added this addition dimension. You can easily skip using it with different "above" molding.

http://www.homedepot.com/p/American-Wood-Moulding-LWM47-9-16-in-x-4-1-4…

http://www.homedepot.com/p/American-Wood-Moulding-WM100-11-16-in-x-11-1…

For the side rails we also used 10 inch boards. I thought it made the bed look more proportioned. I will add additional pics of the molding, so re-check pictures. Again, let me know if you have further questions.

Farmhouse storage platform bed

Submitted by Anonymous (not verified) on Sat, 05/23/2020 - 20:01

Fellow Alaskan here!
Wood and screw Materials costed $320
The metal storage buckets are outdoor drink buckets from Home Depot $200 for 8 of them!

There are 4 storage buckets on each side! We took this from your farmhouse plan and altered it for king size. And in after thought he made a baby co-sleeper to match, 30$ to make!

Built from Plan(s)
Farmhouse Storage Bed with Drawers (Queen)
Estimated Cost
$550
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
Weather gray stain
Watered down white paint
Poly on top!
Corrugated rusted metal is restored from a local barn that was getting torn down.
Recommended Skill Level
Intermediate

Comments

DIY Wooden Bed

Submitted by Anonymous (not verified) on Mon, 02/05/2024 - 08:36

We needed a solid queen-size bed for our rental cottage, and Ana White had the perfect plans! Easy to follow, fun to make and such a beautiful big solid bed! We are so proud of ourselves. I can't believe we made this! I am really looking forward to my next project. Thank you Ana!

Blog Link
sandragrantpdt
Built from Plan(s)
Modern Farmhouse Bed Frame
Back