1. Home
  2. Plan Catalog

Camp Loft Bed with Stair, Junior Height

|save this plan
Submitted by Ana White on Tue, 07/16/2019 - 17:45
Difficulty
Beginner
| Print this plan

Build your own loft bed plans with stairs all from 2x4 and 2x6 lumber!  This super sturdy and beautiful design features a platform for easy access, junior height loft bed plans free from Ana-White.com

wood loft bed with stairs

This loft bed has been built and cherished the world over for almost a decade.  Here's why-

  • It's inexpensive to make - about $50-$100 in materials
  • It's super sturdy and strong because of the 2x4 and 2x6 materials - the same materials we build houses out of
  • It's an easy to build design that is fairly quick to tackle
  • The platform with stairs make it very easy to access the loft.  The lower platform is at about the same height as a floor to mattress, so it's a very natural and easy process to go from the bed to the platform
  • This loft bed is a very beautiful piece that can go with just about any decor

I built this loft bed for my then four year old daughter.  At four years old, a loft bed seemed like a bad idea.  But with the stairs, it's really not that different than a regular bed - just the access is at the bottom.

The stairs are so much easier to use than a ladder.  And the platform is just right.  Instead of having to crawl down a ladder, you simply swing your legs off the bed (just like a normal bed) and they rest on the platfrom.  Then you stand up (with good headroom) and walk down the stairs.

The goal was to create a loft bed that mom and dad could easily crawl into and snuggle and read bedtime stories - and easily sneak out when the child drifted off to sleep.

We designed this bed to fit inside a room just bigger than 8x8.  Yes, 8x8.  It gave the room so much more useable space!

The window was previously the obstacle in the way of building stairs.  But with the lower platform, we were able to not cover the window. Now it's entertainment for the kids as they use it as a stage, and look out the window from it.

Under the loft bed stair platform, no storage is lost.  It's a great spot for a toybox or bin.

The best part about this bed is how easy and inexpensive it is to make.  That's all 2x4s and 2x6s (I'll share my finishing technique with you later this week) bringing the total cost of lumber up to about $50!!!  

Convert to Bunk Bed with Stairs Option

We also love this bed with a second bed under it to create a bunk system.  We have plans for a matching twin bed frame here.

NOTE: You may wish to increase the leg length by about 6" to give more headroom to the lower bunk - depending on how tall you make your lower bed height.

bunk bed with stairs

Photo SUBMITTED BY CAJSAWALLWORK 

Loft Bed with Stairs Plans

Pin for Later! 

Camp Loft Bed

Dimensions
loft bed with stairs dimensions
Dimensions shown above. Fits twin.

Preparation

Shopping List
  • 15 – 2x4 @ 8 feet long
  • 4 – 2x6 @ 8 feet long
  • 2 – 2x2 @ 8 feet long
  • 1 – 1x2 @ 8 feet long
  • 2 ½” pocket hole screws
Cut List
  • 4 – 2x4 @ 65 ½” - legs
  • 2 – 2x6 @ 37 ½” -bed siderails on ends
  • 5 – 2x4 @ 37 ½” - guardrails on ends
  • 5 – 2x4 @ 75” - guardrails and base support
  • 2 – 2x6 @ 75” - bed siderails
  • 2 – 2x2 @ 75” - cleats
  • 2 – 2x4 @ 30 ½” - platform
  • 2 – 2x4 @ 37 ½” - platform
  • 1 – 2x4 @ 41 ½” - platform
  • 2 – 2x4 @ 20 ½” - platform
  • 12 – 2x4 @ 22” - decking
  • 2 – 2x6 @ 43” (both ends cut 45 degrees off square, ends NOT parallel) – to be trimmed down in later steps
  • 6 – 1x2 @ 7 ¾” (both ends cut at 45 degrees off square)
  • 6 – 2x4 @ 20 ½” - stair treads

This bed requires a slat system (1x3s, 1x4s or 2x4s or similar) or a bunkie board mattress to complete

Tools
Tape Measure
Speed Square
Pencil
Safety Glasses
Hearing Protection
Kreg Jig
Drill
Circular Saw
Power Sander
Drill Bit Set
General Instructions

Please read through the entire plan and all comments before beginning this project. It is also advisable to review the Getting Started Section. Take all necessary precautions to build safely and smartly. Work on a clean level surface, free of imperfections or debris. Always use straight boards. Check for square after each step. Always predrill holes before attaching with screws. Use glue with finish nails for a stronger hold. Wipe excess glue off bare wood for stained projects, as dried glue will not take stain. Be safe, have fun, and ask for help if you need it. Good luck!

Instructions

Step 1

Build the ladder end as shown in diagram with 1 1/2" PHs and 2 1/2" PH screws. Use glue to fasten - these joints are permanent. If you are building this loft bed without the stair platform, add 2x4s all the way down to make a "ladder" for the kids to climb up.

Step 2

Build front end of loft bed same as ladder end.

Step 3

Now here's where we skip the glue. To make this loft bed easy to disassemble, I did not use glue here. The inside width for the mattress area should be 39", insetting the side rails 1 1/4" from outsides. I did this so your PH screws have lots of board to grab into. This bed has NOT been weight tested or guaranteed. If you feel you need extra support - add metal brackets under the 2x6s. An alternative method is to attach metal bed brackets directly to the ends if you have those. Notice the cleat is added in this step to. I used 2 1/2" screws and glue to attach, screws every 6-8" all the way down. This bed is designed to work with a bunkie board, but we just used 2x6s cut to length as the bed slats.

NOT SHOWN: Add the fifth 2x4 @ 75" at the back base of the bed to support the legs at the bottom.

Step 4

Now we'll start building the stair platform for the loft bed with stairs.

Step 5

Attach stair framing to the loft bed legs.

Step 6

And then the decking is placed on top of the stair platform.

Step 7

The stairs are easy to build - just 45 degree angles! We went ahead and drilled 1 1/2" PHs along top edge of the stairs to connect the stairs to the bed later on.

Step 8

Then we added the stair treads. We also drilled 1 1/2" PHs along ends of the stair treads and attached with 2 1/2" PH screws just for extra strength. Everything gets glued.

Step 9

The bed was finished outside and then assembled in the room. TIP: We haven't found our bed needs it, but for extra support, you could add another 2x4 @ 75" (at $2 a 2x4, cheap insurance) to the base of the bed to further support the bottoms.

Finishing Instructions
Preparation Instructions
Fill all holes with wood filler and let dry. Apply additional coats of wood filler as needed. When wood filler is completely dry, sand the project in the direction of the wood grain with 120 grit sandpaper. Vacuum sanded project to remove sanding residue. Remove all sanding residue on work surfaces as well. Wipe project clean with damp cloth.

It is always recommended to apply a test coat on a hidden area or scrap piece to ensure color evenness and adhesion. Use primer or wood conditioner as needed.
Project Type
Beds and Bed Frames
Loft Beds
Twin
Bunk Bed
Room
Kids and Toys
Style
Children's and Kid's Room Furniture and Toy Plans

Comments

Richblue2

Sat, 07/04/2015 - 20:18

First, my concern was that by looking at the plans this was not going to be sturdy at all, but once I started assembling, I started giggling at how wrong I was. I sat myself right on top with no hesitation once completed.

Two notes for the heavy planners like myself.

You will need one 1 lb box ea of the 2.5" and 1.5" screws. Basically, 4 screws per cut piece.

And when I put mine together, the 12 planks that make the platform at the top of the stairs doesn't completely cover the platform. I just used 2 pieces of scrap 2x2 from the cleats and it filled perfectly.

Made 2 at once, and it paid off when my kids got back from Nana's and...surprise! Big daddy win. :-)

KaylaSantiago14

Sun, 08/23/2015 - 13:40

Would it be possible to add a few inches to the height as well as making it full size? I am at beginner level for sure so I need all the instructions/directions I can get! Haha. My son is 4.5 and we've got a baby on the way and we'd really love to do something special and fun that he could grow with. Please help! :)

Ana White Admin

Mon, 10/12/2015 - 11:29

We are unable to commit to plan requests at this time. I would suggest looking at brag post for added tips, tricks and measurement mods. Here is one to start with http://ana-white.com/2013/06/loft-bed  Be sure to read through all of the comments for added information! Hope this helps!

Eleanor Martel

Wed, 10/21/2015 - 23:27

We love this bed! Thank you so much! the only thing we had a problem with was there are no written instructions stating you have to gap the 2x4s on the deck part....we were halfway done screwing them in when i noticed it. What we did was put 11 2x4s and 1 2x6 and it was perfect. Again thank you so much.

Ryna

Wed, 10/28/2015 - 16:03

I am super new to this and was wondering what types of wood choices everyone was making. My local lumber store has lots of Fir, but I'm not convinced it is the choice wood for this project.

 

cortesfamily

Fri, 01/29/2016 - 21:58

hello!!! 

this would be our very first family project!! its both frightening and exciting! But before we begin do we need the circular saw and kreg jig??? we have a saw just not the circular one. 

Lady Goats

Sat, 01/30/2016 - 14:50

How Exciting!

I hope you have fun building this. That's key ;-) What kind of saw do you have? If you have another way to cut the wood, you do not need a circular saw. Ana has a drop-down list of tools to choose from, so she chooses many options so that people can use what they have on-hand. Hope this helps!

Free Plans Made Possible By Our Sponsors

Ryobi Tools
Kreg Tools
shelf help