Hi Ana, I have been looking over this plan all day today and last pondering this plan. What type of wood would you recommend building it from? I went to Home Depot here in AZ today and found wood to be extremely expensive. Oak was over $4.50 a linear foot for 1x6 and Polar was around $3.50. I was looking at pine as well but they have different types and some of it has lots of knots in it. This is my first wood project and I am not sure exactly what to do and I am somewhat confused on wood choices. I was hoping to make this for around $40-$50 like your post indicated, but I am not what wood you used to get it at that price. I could use some insight as to what to do here. I read your posting today about woods but it still leaves me confused.
Thanks for all the help,
Toni

Hi Toni,

I have been thinking about your comment, and wanted to add that there is a wood in the maple family, called Rubberwood or Parawood, that gaining much poplularity in the furniture making world. It is up to 50% less than maple or other hardwoods, is ecologically friendly (the rubberwood tree produces latex, and is only harvested after latex production diminishes) and becoming more and more available.

We discussed this on the Facebook fan page in a discussion. Perhaps try calling around to see if rubberwood is available in Arizona.

Good Luck!

Ana

Thanks for the info Ana. We decided to go with pine and are in the process of building the bed right now. We spent around 75-80 on the wood..so I guess AZ is a little more expensive.

We are having so much fun and love building it. Since this is our first project we are finding out several things. One of them is to measure a little over since the table saw takes out 1/16" so we had to over measure to compensate for it. We also found it is SO much easier to drill pilot holes for the screw on the boards...and also to rough sand the boards before assembling. It was some what difficult to sand some of them when we had it all put together. I am not sure if those are things people should know and we just missed them.

Also, I wanted to let you know that there is a mistake in your wood to buy. You need (2) 2x4's not one. You have to cut two board that are 50 1/2" and there are only 96" in 8'. We also found that you have to screw in the spacers at the end of each side. We just glued them and left them over night and then this morning when we put the posts on and went to pick it up, they came out...oops.

Thanks so much for your plan. We really are having a good time working with it and cant wait to start the 2nd bed. (We have two little boys that both want one).

Hi Ana,

I am so inspired by your talent and your ability to just do it.I never thought I could but your directions look quite simple. I would love to make this bed for my son. The only problem is that I need a double/full bed since he falls off the twin size. I would really appreciate it.

Thank you,
Romy

Love LOve this bed! How would I make it for a full size mattress? Thanks for all the awesome plans!
~Kristi

Ana,

Your site is really inspiring. We're considering building a bunk bed. Your plan shows 73 1/4" for the length of the twin mattress, however standard twin mattress dimensions on the net are 75" long. Is this a mistake or can a twin actually fit in a 73 1/4" space?

Thank You.

Hi Ana,
I too love the plans and would like the plans for a full size bed.
Nancy

Hi Tom, I made the changes as you stated to better fit a 75" twin. Thanks for noticing this. Ana

I am also wondering if we could see plans for a full sized bed??? I LOVE this website :)

HI - LOVE this plan. If we wanted to add slats to avoid using a box spring, would we need to use a different sized board for the side rail? Would 2x6 still work or should we use 2x8 (if that exists, I've never seen that size but never actually looked for it).

Ana, I love your blog. I'm looking for some additional insight on how to screw the boxspring frame to the headboard/footboard. You say,"Screw into the headboard, and screw at an angle into the four posts." Is all the screwing done from the inside? How long should the screw be? I don't want to end up with a squeaky bed (like my current bed is). Any tips? Have you ever used bedrail hangers or lagbolts?

Lag bolts would be the way to go. The most important thing to remember here is that the legs support all the weight, which is then carried by the side rails. So you will want to fasten the siderails to the legs, and not just the headboard and footboard (although the headboard and footboard are also fastened to the legs and are very sturdy). The easiest way is to "toenail" your screws from the siderails into the posts, which basically means start by drilling at an angle from the inside of the siderail, drilling into the leg posts.

I just want to note that another reader built this bed, sent me photos, and commented that her bed was much stronger than the Pottery Barn bed they just broke. Zero complaints about the sturdiness of this bed.

Hope this help! Ana

Thanks Ana!!

Ana, Mikk just finished building our second bed from this plan. We used "L" brackets to hold the 2x6 side rails to the 4x4 posts on the headboard and footboard. The bed does not move a single bit. WE love this bed plan and making it for our boys. I will send you more pictures of the 2nd bed when we have a chance.

My husband and I are so excited to get started making our own furniture! Being that we're completely new to the process, we made our first pricing run to Lowe's today and I'm not sure we know how to shop for lumber! The only pine we found was MUCH more expensive than mentioned in a previous comment. The 1x6's alone were $13 EACH, and we didn't even SEE any 4x4's where we were sent to look - Were we looking in the wrong place? The pine we saw didn't have many knots, either - was it the fancy kind? lol - needless to say we felt pretty clueless. Should we be looking for something else or is Lowe's just getting pricey?

Angela, are you in the south? We're having the SAME problem. We made some benches that called for 2x12's, those babies were $19 each. Only one choice (at Home Depot) and they were pre-sealed. I thought that was fine but turns out the seal gums up my orbital sanding paper almost immediately. It was a disaster. We ended up buying 2x6 instead and spent another $44 on those ($11 each x 4 for two benches). My hubby was a little more than ticked.

I don't think it's your shopping, I think it's just WAY more expensive down here.

We're in OK, so, yes, we're south-ish. Aw, that makes me sad! I was really looking forward to building our own, but at rates like these we might be better off financially buying our furniture cheap until we can afford to build something for quality.

Anna (et. all), I love Knockoff wood and am building this simple bed for my first project. My father-in-law and I are building it for my 2 yr. old son and are 'stuck' at step 3. In this step, it says to predrill through the 4x4 and use the 4" screws to attach to the headers. My question is should this be counter sunk half way through the 4x4 or just predrilled? The reason I ask is that if you don't counter sink the 4" screw, then it only goes in 1/2 inch into the header. Counter sinking seemed to make more sense, but I wasn't clear from the directions. Thanks in advance for your help and keep up the amazing work.
Thanks,
pauL

Hi Ana, I love this bed! Do you have any suggestions on how to convert to a twin XL bunk bed?

For some crazy reason i can not find 4x4 pine anywhere? I'm in Denver and i swear no-body carry's a 4x4 of any kind unless it's a Douglas-fir at home depot.

Anybody out there in Denver got any ideas where i might find 4x4 pine?

Hi, I am making this bed for my daughters. Beds are SO expensive in New Zealand but lumbar is too! So before I went to the timber place, I went and shopped the bed place. MDF beds for $500+! New incentive! Just need to get a nail gun!

Hi Ana. I'm confused a bit by step 7. I get that we screw into the headboard with 3" screws, but I am confused as to how to toenail also into the posts.

If I use 2 screws screwing F into G, a total of 8(?) for all 4 corners, am I going to have enough room to tonail through that joint into the bed posts?

I'm about 30% done with the bed as is, and I'm very excited as this is my first real woodworking project. My son is 2 and really has outgrown his crib, so we are VERY excited to get this bed done and have him settled.

Thanks again for the plans and encouragement that you provide. You have a fantastic site!

Ana- I've noticed that you use Google Sketchup. Any reason why you don't post the actual google sketchup files for download? Then we could just click on different parts to get dimensions and change views and everything. Just an idea that might help. Love your site!

Check out Maureen's Smurf Blue Bed!

[...] getting cold on the floor.  Time to move him up onto his own bed.  I had thought to build him the Simple Bed like this one made by the Sew Much Ado [...]

I made two of these for my daughters. Thanks for the plans! I used bed bolts and dowels to fasten the bed rails. that way the head and foot boards would be interchangeable and can be stacked in to bunk beds. love the website

I like this one for its simplicity and I would like to build it. I am really struggling with the 4x4's and 2x4's though. I cannot find these in pine like the rest of the 1x boards. I only have found Doug Fir. This does not seem to be a problem if you are painting the bed. However, I'd like to stain it. I called some lumberyards and they said that 4x4 and 2x4 pine does not exist. Has anyone made this successfully and stained it? Thanks.

I really hope you're able to post the solid wood headboard plans soon! Looking forward to building one for a full sized mattress. Thanks, Ana.

Sooooo, this is my first "big" project....I'm in the process of buying all of the materials. Can you please tell me exactly what type of screws and nails I need to be buying? We're going to be making two and stacking them into bunk beds but, I'm stuck at this point. Please help me !!

I can't find 4x4's either. All I see are pressure treated lumber. They are cheap enough but I am just not sure I should use them to make a bed for my kid if it has chemicals in it and the guy at Home Depot said the boards will warp when dry. Anyone else had this problem? Ana what are your thoughts?

We found all the proper lumber, but it cost $100 for just the lumber : } . Husband is building it now!

I love this site. Is there a way to get the plans for the Simple Bed in a queen?

Would love to see these plans for a queen size bed, thanks!

Douglas Fir is another tree in the evergreen family.

Hi Ana
I am interested in having my husband make this bed for our 2 year old daughter. I was wanting a day bed but havent been able to find one. Are the head and foot board the same size? They look like they are. That is what I am wanting since I cant find a day bed. Thanks!

What if I change the 4 - 1"x6"x8' to 1"x4"x8' ? Would that work? They are way cheaper.

What if I change the 4 - 1"x6"x8' to 1"x4"x8' ? Would that work? They are way cheaper.

You'd have to re-work the slat arrangement for the head and foot boards. Not hard to do at all, but if you're not up for it pay for the 1x6 instead.

Just wondered if you have posted the plans for

"I will also be posting a plan with a solid panel for the headboard and footboard, made of hardwood plywood, in a twin sized. This will be more economical." As you mentioned in one of your earlier comments to this post. Thanks.

I actually plan on making the Simple daybed, but would like to use a hardwood plywood to cut down the cost.

I am planning on making 2 of these beds and stacking them to make bunk beds. How do I attach them to make them safe. I have 2 boys that play rough.

Hi Ana! Thanks for the instructions. Quick question though, which type of nails do you use in steps 1 and 2, regular or finish?

I plan on making this bed this weekend for my daughter. I plan on using my nailgun for the 1.25" and 2" fasteners for the head and footboards. For the remaining screws, I'm going to use some self tapping screws to prevent wood splitting.

I like the pictures that are made in Google Sketchup. I just wished they were bigger because it's hard to see some of the text.

Thanks for making us novice woodworkers seem like professionals.

Is there any way that we can get bigger pictures for the instructions on the simple twin bed.All the pictures remain small even when they are clicked on

Hi Ana.... It would be fantastic to see some baby crib plans!

A simple one, as well as something with a bit more 'flair'. :)