Community Brag Posts

I followed Ana's Farmhouse bed plans, using 1 x 12 boards for the sides and leaving off the extra piece at the top of the headboard. I didn't want to cover any more of the brick than necessary and I have a large bit of artwork to put over the bed too.

Because my mattress is a Sleep Number bed on a pedestaI I had to add a footboard to keep the mattress from sliding off the end. The footboard is simply a 24x24 section of plywood with wainscoating and 1x2s to match (sort of) the headboard.

I turned my legs (woot woot!) but you could buy legs that are 3x3" @ 18".  This was a simple build using pocketholes + glue joinery and using glue + nails for the shelf and tops.  To allow for seasonal expansion of wood I spaced the wood on shelf and top slightly because I built it in the dry winter.

I used a Dark Walnut stain first and went back over with a light coat ("dry brushing") of a sage green paint.  Lightly distressed edges.

I have more pictures and details on my website: http://www.theprojectlady.com/2018/02/diy-tutorial-chunky-coffee-table-…

Happy building everyone!  It's so rewarding, right!??

Loved Ana's Balin Console, but the space I had available for this piece was only big enough for two drawers, so I attempted to change it. A few minor mistakes called for a few other modifications as well (the drawer fronts), but overall I am still happy with the product. The first nail and hammer only project I've completed (other than the ten dollar ledges). The passion for this new-found hobby continues, THANKS ANA!

I think that this is my favorite project so far! It was a daylong project for the build and then another full day of sanding and finishing. My girlfriend needed a new table for a big dining room in her new place so she got this. She is happy it looks great and is extremely functional. I will add the bench that I made to match as soon as I get the pictures. I am available to do builds for people who like what they see and dont want to pay retail price for this stuff. check out my profile

http://ana-white.com/users/daddydrew

We made the loft bed but changed it to full size and changed height to 80in and increased length and width of the platform. 

I was going to make this project out of pallets, but all the pallets that I have access too were pretty beat up and falling apart, so my mom gave me some leftover cedar fencing that she had on hand.

This is my first build using reclaimed wood; the boards looked pretty straight when I got them, and even after they had set in my heated garage for a week, but when building time came I found that they are warped. The boards dont fit exact, but I think it gives it more character.

My husband and I are debating on if we should stain it, paint it or just seal it. We plan on using it for a silverware caddy, since the house we're currently in doesnt have a single drawer in the kitchen big enough for a silverware tray! We do plan on using rope for a handle on it, but I have yet to find a rope that I like the feel of in my hands (Im picky like that).

I made this using hand tools, and 16gage nails (what I had on hand). My brother is currently hoarding all the power tools at his house and isnt sharing so I must learn how to do everything old school again!

This is also my first build of anything since becoming a mommy for the first time (6 yrs ago!), since then I've generally stuck to reupholstering things. Now I want better, less expensive things than I could just buy.

We had these spices in a cabinet, which were impossible to see stuff in the back. This was a perfect solution.

Now, we also had more spices then we know what to do with, so we added a second rack at the bottom of the door as well. I just adapted the plans to be 30 inches tall to accommodate the size of the lower portion of the door. This was accomplished by removing the 1st and 3rd measurements for shelves, and using the remaining for an extra tall shelf.

I also only used a finish nailer (and wood glue),to assemble, in combination with a brad nailer to hold the back plywood on.

I also chose not to include the dowel buttons on the end, and did not cut the dowels to length; they were inserted all the way through and trimmed off with a Japanese pull saw (get one, you will LOVE it), then fastened through the front with the finish nailer, then sanded flush.

I also elected not to paint to finish the piece and leave the natural wood.

We used the barn door console plans as a base to make the built ins and the faux fireplace mantel plans for the center! We love everything this site has to offer!! 

A *mini* Farmhouse Bedside Table

Simple white outdoor furniture. Easy to assemble. Ordered outdoor fabric online @ purchased bulk outdoor foam & cut it myself! Much cheaper than pre made cushions.

Building a storage shed was quite a jump for me but because of the confidence and experience I gained from Ana's  site I decided to give it a shot.  I acquired the plans online. It has 8 foot high walls and 3 feet of "attic space".  The shed is 8'x12'.  I used cement board lap siding.  It took about seven weeks to finish working a few hours here and there.  I really like it.  Even has a little window flower box.

I started with the triple cubby design, resized it to fit my space, added doors, and built three of them.  They run the length of the wall in the area where my pool table is, and provide both storage and seating.  In the process I used a multitude of Kreg items - the rip cut, the pocket hole jig, the hinge jig, the cabinet knob jig, and the corner clamps.  As this was my "starter" project, I made some mistakes, learned a lot of lessons, and can't wait for my next project!

Will be making MANY more of these, so easy and a fun gift! This one was for my niece.

I wanted to make chairs for a vanity that I made for my 5 and 3 year old girls. After I finished the chairs I decided not to attach the back and upholster the seats instead. They love them and so do I!! I measured each cut multiple times and took my time. I think that helped me tremendously because it all came together very easily!

Thank you Ana White!!

I was inspired by DIY Pete's Double bench seat but wanted more of the traditional adirondack look, so I kind of combined 3 plans together to get this! For my first attempt at these chairs with a few of my own tweaks I think it turned out pretty darn well. Changing the legs to extend out the back and curve out the front posed small challenge and then mounting the chair backs at a comfortable angle. There are some imperfections that probably only I would notice but I can correct it for next time. This photo was taken just after staining when I noticed that I missed sanding some wood filler on the front of the seat. Building these chairs only took about 6.5 hours before the finishing process but the next time would go faster. I am currently in the process of adding a protective varnish to give it a semi-gloss finish. All together it cost me under $100 CDN or $80 USD.

Memorial Box