Community Brag Posts

Sweet Pea Cottage

What's a mom to do when she can't choose between the cabin bed, the little cottage loft bed and the sweet pea garden bed? Head over to google sketchup and sketch up a set of plans incorporating favourite aspects of all three beds! This one had been in the planning stages for over a year and I’ve called it “Sweet Pea Cottage”. It took me about 3 months to build in my spare time and I couldn't be happier with how it turned out. Of course our daughter loves it as well! Who wouldn't want to sleep in their own little house bed! :) I used spruce and 3/4" purebond plywood for the main build. To give the plywood panels a planked look, I cut the front into various size rectangles so I could run them through my table saw using a 1/4" dado blade before assembling the pieces together with pocket holes. The roof panels and dormer are 1/4" plywood glued and screwed to a frame and then I used construction adhesive to adhere the dormer to the front roof panel as well as adhere the cedar shakes. Painted with Behr Pure Ultra White and topped with a satin polyacrylic. I left the cedar shakes raw but if I built it again, I think I would top them with some sort of flat or matt sealer as the rough texture makes dusting them a bit difficult. One of the first questions I get is "how difficult is it to make the bed?". Surprisingly it's not that hard. Because the bed is so open on each end and we have it set up in her room with access on three sides, it's easy to manoeuvre the mattress a bit to change the bedding.

Comments

April1360

Thu, 02/17/2022 - 08:15

I love this bed. I would like to make one for my Grand-daughter. Do you have plans for this cute bed? I just signed up today so I wasn't able to see the comment section. I'm sorry if this has already been asked.

Cubby Bench

Submitted by dhenderson on Sun, 03/20/2011 - 17:57

This was a very fun project to work on.  One of my first ones, I chose this to replace the store bought cubby book shelf in my daughters room with something she can sit on as well as use for storage. 

 

 

Built from Plan(s)
Estimated Cost
$25-30
Estimated Time Investment
Afternoon Project (3-6 Hours)
Finish Used
Two coats total - each of a different color stain. Haven't added the poly yet, that is on my to-do!
Recommended Skill Level
Beginner

Castle Bed

A big thanks to FSMumford for drawing this in Sketchup. I had to re-draw it to take into account metric wood dimensions and bed sizes here in NZ, and also to remove a foot or so from the length.

We just gave it to my daughter today, and already I need to make some modifications. I immediately put some vertical grab rails at the top of the steps and slide. The steps are too big for a toddler (she's 3 today) and I didn't take into account how thick a pillow top mattress is! I really needed to make the end guards higher. In fact, were I to make it again, I'd probably make the towers taller and lower the height of the bed by 8-12 inches. While this would lower interior room, it might make the steps a more reasonable height for a littlie. If you're building for a 5 or 6 year old, this may not be an issue. Also, it would make the angle of the slide shallower (it's a bit steep, I reckon). I used 7 sheets of 16mm MDF but if I'd laid them out like FSMumford did in her plans I would have used less. Our (one car) garage is too small and the whole build process, including painting, was a royal pain in the bum. Fun, but a pain. Speaking of painting, next time (riiiiight) I'd try to paint as much as possible before assembling. I built mine in modules but even so it's hard to get a nice coat of paint on the insides of things. Edges of MDF need to be painted and sanded at least twice to look nice. Don't underestimate the time needed to get a good finish - I spent a third of my build time finishing (mostly, again, due to limited space). A narrow foam roller is great for cutting in but doesn't seem to get enough paint on to cover well on larger areas. In places I have three coats and can still see my pencil marks. I used Dulux Aquanamel.

Estimated Cost
Don't get me started....
Estimated Time Investment
Week Long Project (20 Hours or More)
Finish Used
Dulux Aquanamel.
Recommended Skill Level
Intermediate

Comments

Chineselyons

Wed, 06/05/2013 - 10:47

This is gorgeous! I know there are modifications to take into account but it's stunning none-the-less.

inside corner wall cabinet

First cabinet in my kitchen remodel.

 

Built from Plan(s)
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
Sherwood by Sherwin Williams. Special purchase 5 gallon minimum. Water based lacquer. Dark Mahogany stain, HVLP sprayed on lacquer.
Recommended Skill Level
Intermediate

Alaskan lake cabin bench

Im building these for a friend to sell at alameda county flea market. It takes me a couple day to do one if its on spare time

Estimated Time Investment
Day Project (6-9 Hours)
Finish Used
One was painted with chalk paint cut in half with semi gloss black and clear laquer. Other is all clear laquer
Recommended Skill Level
Beginner

Distressed Milk paint technique

My client wanted a distressed paint look for these custom doors that I built . Not knowing how to do this I immediately looked for some tips from Ana White . I found a link on your page to do this using gel stain and milk paint . It worked very well , I had to do a couple trial and errors do get the exact desired effect we were looking for but in the end I would have been lost with out your tips .

Thanks Tony Curtis
FB @ Rockwood Designs Rustic Furniture
Instagram @ Rockwooddesigns_TonyCurtis

Comments

Country Rustic Shelf

We just bought our first home a few months ago.  It is taking me a long time to decorate, because I am more picky about what goes on my walls.  I saw this shelf and I knew I had to build it.  It was really simple to do.  I even did it without my husband, and that is huge for me. I have step by step pictures on how to make this shelf on my blog.
supersaturdayldscrafts.blogspot.com

Ana's Barn Beam Ledges are very simular, but I turned them and added molding to the front.

Built from Plan(s)
Estimated Cost
20.00
Estimated Time Investment
Afternoon Project (3-6 Hours)
Finish Used
For the finish I used dark walnut gel stain, and then after the stain dried, I painted it with Home Depot Vermont Cream. When all the paint is dry, you sand the outside so the stain shines through to give it a more rustic country look.
Recommended Skill Level
Beginner

Just Couldn't Reach

My son is a little short for his age and we have been searching for a stool that he could use to wash his hands by himself. I came across these simple and quick plans for an amazingly, functional stool. I spent about 4 total hours on it, made it from scraps that I already had, it looks great and it hold me too... all 230 lbs.

Built from Plan(s)
Estimated Time Investment
Afternoon Project (3-6 Hours)
Finish Used
Semi-Gloss Paint (left over from painting my ceiling)
Minwax stain and poly.
Recommended Skill Level
Beginner

flag garden bench

wife and I call this our memory garden bench. our son passed away last year he was a SFC in the us army. we sit upon to remember all the good times.

Built from Plan(s)
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
stain and 3 coats of spar
Recommended Skill Level
Beginner

Comments

Dresser with Changing Table

Submitted by dhoop31 on Sun, 10/15/2017 - 05:52

Was asked to build this with an added changing table on top.  Built it for my neice her first child.  

Estimated Cost
350.00
Estimated Time Investment
Week Long Project (20 Hours or More)
Finish Used
Acrylic paint
Recommended Skill Level
Intermediate

Toilet shelf

Submitted by Lukilla on Fri, 10/22/2021 - 17:54

We had someone ask us to make one of these for them, and we couldn't resist making one for ourselves. Fun easy build and adds some style to our bathroom.

Minwax early American stain on the finish

Comments

A bathroom cabinet for all that stuff!

Overall measurements: 24x40. I followed the same basic steps as the nursery armoire, but on a much smaller scale and with a 1x3 added to the back for hanging the cabinet on the wall. I sketched this out on my own and built it to fit above the toilet in my girls' bathroom.

For the first time, I used my table saw to route a space for the 1/8" MDF cabinet backing and drawer bottoms. I will probably use the same method again, but the MDF has to be absolutely square for it to work.

Also a first for me, I used a shelving jig to drill perfectly spaced shelf pin holes on the inside of the cabinet. I love the jig and the accompanying drill bit (from Woodcraft -- orange and blue do not carry it) and I'm looking forward to using it a lot more in the future.

The white latex paint finish is covered in Krylon "crystal clear" spray, which is (sadly) not actually crystal clear. I really like its durability and ease of application (re-coat after only one minute!), but will only use it on darker colored projects in the future. I'll have to sand, paint again, and recoat with my old standby, Minwax Polycrylic, to get rid of the yellow tones in the "crystal clear" Krylon spray.

Built from Plan(s)
Estimated Cost
$125
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
Spray primer followed by Sherwin-Williams ProClassic semi-gloss white (which I applied in several thinned coats). Krylon not-so "crystal clear" topcoat.
Recommended Skill Level
Beginner

Queen Size Farmhouse Bed

Submitted by Yodannos on Sun, 06/09/2013 - 13:28

Modified Queen Farmhouse for a rental unit that we have. I changed the heights of the head/footboard to give it a taller look.

Built from Plan(s)
Estimated Cost
$200
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
Minwax ebony (3 coats). Antiqued by sanding various edges. 2 coats of satin polyeurethene.
Recommended Skill Level
Intermediate

Comments

Full Size Bed Headboard

Headboard with tongue and groove boards for the face.

Estimated Time Investment
Afternoon Project (3-6 Hours)
Recommended Skill Level
Beginner

Barn Door Storage Wall and Trestle Desk

Submitted by Anonymous (not verified) on Mon, 10/23/2017 - 10:14

 

Some of my first builds... I built this wall unit with sliding barn doors and the desk in front of it.

By Kraig Faulkner

Recommended Skill Level
Intermediate

Comments

Modern Farmhouse Bed

Submitted by Anonymous (not verified) on Fri, 11/05/2021 - 13:34

After living in a 19ft travel trailer and touring the country, moving every three months as a travel nurse, for four long years, it was awesome to build our bed frame!
I swapped out the 1x4s on the headboard with pallet wood, and finished the whole thing with 000 steel wool and vinegar stain.
Absolutely love it! And man! Do we sleep well now!!!

Built from Plan(s)

Comments

Planters

Submitted by Liz H. on Thu, 03/31/2011 - 11:33

This was a fun easy build...I took the toy box plans and used 1X4s instead of solid sides and bottom.  I cut the legs short and put finals on.  

Estimated Cost
$25
Estimated Time Investment
Afternoon Project (3-6 Hours)
Finish Used
Black outdoor paint.
Recommended Skill Level
Starter Project

PICNIC TABLE THAT CONVERTS TO BENCHES ~ Cedar Finish

Submitted by Tonya P on Mon, 06/10/2013 - 19:50

I saw a type of this for sale at Costco for $109 (for just ONE bench, not a pair). It' looked nice, and I almost bought it, but it had metal legs and trim and I wanted more of a natural look to go with my Cedar theme that I have going in my back yard garden/patio/greenhouse area. After seeing it in the store, I did an online search to see if I could find something a little more organic in nature... imagine my surprise when Ana's version of the bench/table came up! I looked over the plans and thought... well, I made the modified Farmhouse Table via her excellent instructions, I can surely do this! I did make a small change, I cut small pieces of wood to use as stops for the backs of the benches, instead of using holes and bolts to hold the backs at an angle that is comfortable. You can see this in the pictures, they are just beyond the back of the seat boards, on the leg supports. Thank you Ana! It was easy, quick, and they look SO good on my patio. I will be making more, maybe even selling a few because so many have asked me if I might :) I figure the cost was about $65 for both benches. A great deal and a fun project! Patrick really has to refrain himself from wanting to "help" me, but I am determined to do it myself... and low and behold! With Ana's generous free plans and inspiration, no problem!

Estimated Cost
$65 for the two
Estimated Time Investment
Day Project (6-9 Hours)
Finish Used
Cedar Stain. The project was not stained until the benches dried out for several days. They were built using green treated lumber, so they needed to dry out well before staining.
Recommended Skill Level
Beginner

Comments

Kabarie

Wed, 07/17/2013 - 13:11

Oh, great job!! I love it. The back stops for the bench is a great idea because those bolts are expensive! I'm going to do the same. Thank you for the idea!

Seasonal And Holiday

Farmhouse table

Submitted by Chalkie on Wed, 11/10/2021 - 16:49

We moved into our house 2 years ago that was built in 1935. We recently decided to knock a wall down separating our kitchen and dining room to make it 1 large kitchen with a dining table. While removing the wall, I decided to repurpose those old 2x3 wall studs into our dining table. The wall also contained random 4x4s, which was perfect for the legs. It took a while for me to figure out what kind of leg style would work with the amount of wood I had to use. The fancy X farmhouse table was the perfect leg design for what I needed. I must say, wood from the 30s is MUCH different than the wood today.

Built from Plan(s)

Comments