Treehouse bed
![](/sites/default/files/EBFAA4B9-0ABD-4A90-A4C0-980B9C93D75E.jpeg)
Great project. Simple enough to feel like you can do it, big enough to feel accomplished when it’s done. My son loves his new bed!!
Great project. Simple enough to feel like you can do it, big enough to feel accomplished when it’s done. My son loves his new bed!!
A *mini* Farmhouse Bedside Table
Mon, 06/06/2011 - 00:07
LOVE this as a nightstand! What a great idea! Beautiful finish too!
Sat, 06/18/2011 - 19:16
I have been looking around and haven't been able to find any measurements for the mini farmhouse table. Are there any or do you just have to wing it? I really don't want to wing it!
Mon, 02/06/2012 - 09:58
The mini farmhouse table cuts are found here: http://ana-white.com/2011/06/mini-farmhouse-bedside-table-0. Read through the comments there was a mistake with one of the cuts, I wrote 2 cuts when 4 was needed. Just follow the assembly instructions for the original farmhouse table.
Tue, 07/05/2011 - 16:23
Yes! I would also love, love, love the modifications of this as a nightstand from anyone. This is my favorite nightstand. Pretty please?
Mon, 02/06/2012 - 10:01
I'm pretty sure that you've found the plans but just in case, http://ana-white.com/2011/06/mini-farmhouse-bedside-table-0. Read through the comments there was a mistake with one of the cuts, I wrote 2 cuts when 4 was needed. Just follow the assembly instructions for the original farmhouse table.
Tue, 01/31/2012 - 19:01
This is exactly what my wife and I are looking for...plans?
Mon, 02/06/2012 - 10:02
http://ana-white.com/2011/06/mini-farmhouse-bedside-table-0. Read through the comments there was a mistake with one of the cuts, I wrote 2 cuts when 4 was needed. Just follow the assembly instructions for the original farmhouse table.
Fri, 10/26/2012 - 14:16
I see theres a cut list but not a shpping list? I know...I'm needy! I'm a beginner!!!! :)
Mon, 04/14/2014 - 11:45
This mini farmhouse nightstand was my first building project. Of course Ana's easy to follow PDF's made it doable but check the tips above for cuts on your 2x2's. One rookie mistake I made was forgetting to double check my pieces. My 1x2's were actually thicker than 1" so they protrude from the side of my piece a bit. A sander could fix that. All in all so proud! Thanks to Ana and to everyone else for your brags.
P.S. A mini keg jig kit is SO worth the investment. I used standard wood-cost of about $20 including $4 for my drawer handle hardware. Kreg jig kit plus pocket hole screws were an additional $30 but I have plenty left for my next project;)
Simple white outdoor furniture. Easy to assemble. Ordered outdoor fabric online @ purchased bulk outdoor foam & cut it myself! Much cheaper than pre made cushions.
I made easy picnic table for my son over the weekend. The plans are very straight forward and easy to follow. This table fits two toddlers on each side but it was smaller than I thought it was going to be. I think my son will grow out of this by the time he is 4.
We estimate that the cost of this project was right around $50, but we had a lot of tools and materials already. This was a fun project and a great piece for the cost. I would suggest staining as much as you can before assembling those legs! Staining and applying poly was a pain in the butt! We used a dark mahogany Minwax stain and 2 coats of Minwax poly. It took us a while to do it because we have a 11 month old that keeps us on our toes.
Wife wanted a bench in the entryway of our house. But instead of your typical bench/coat rack I left the fronts open for either shoes or blankets. I also added a picture shelf at the top. Being a 96 year old Craftsman style house, this bench covers what used to be a second door to the front bedroom on the other side of this wall
Thu, 04/21/2022 - 15:04
Thank you for sharing, this is gorgeous and functional!
Will be making MANY more of these, so easy and a fun gift! This one was for my niece.
Fri, 06/10/2011 - 11:28
This chair is just beautiful! Really perfect, really! Thank you for sharing!
Fri, 06/10/2011 - 22:34
Loving the sling!! Simple and traditional which I am really getting into lateley. Love it!
I wanted to make chairs for a vanity that I made for my 5 and 3 year old girls. After I finished the chairs I decided not to attach the back and upholster the seats instead. They love them and so do I!! I measured each cut multiple times and took my time. I think that helped me tremendously because it all came together very easily!
Thank you Ana White!!
Address Sign
Planter box by Harvey!
My father gave us a whole mess of reclaimed barnwood that a neighbor had given to him, and I knew just what to do with it! My husband had an old cooler that would be the perfect size to create a rustic cooler case from. We built a frame out of 2x2's, faced it with the old wood (which looked like old cedar fence pickets) and popped the cooler inside. I've got a whole step-by-step on my blog. Love the way this turned out! We used an antler shed to make the lid handle, and bought some great rustic looking handles for the sides, as well as an old rustic bottle opener. Can't wait to see it in action!
I made this for my 2 young daughters. They love it.
Fri, 08/02/2013 - 10:38
HI! Great Job! i hope mine turns out just as nice! i have a question. how wide did you make the stairs on yours im looking to make my staircase narrower to fit in my spot but i wanna make sure i dont make them too narrow but yours looks perfect!
In reply to staircase by eliseaurban
Sun, 12/21/2014 - 09:31
I'm so sorry that I never answered you. I built the steps 14 inches wide. I had to make them more narrow than I had wanted because of the doorway. They ended up perfect for the kids though.
Sat, 10/03/2015 - 08:11
Hola Ana White, tu inspiras a hacer cosas increibles. Gracias por el tiempo que dedicas a inspirarnos!
X coffee table
I liked the apothecary plans and loved the look. My wife really liked it and needed somewhere for our daughter to keep her toys. For our anniversary I told her I would redesign it and make it as she liked. This is what we came up with and I think it turned out great. We used full overlay door to prevent the visible lines on the original and are really happy with the results.
I built this cabinet as a Christmas present for my mom, but life got in the way and I just got around to finishing it this week. It didn't helo that I was just learning my way around a Kreg Jig when I started this project. I used 1x12 dimensional lumber from lowes, and went with the cheap stuff. Looking back I would have just splurged on purebond 3/4" plywood because the boarda would have been smoother but at the time I didn't have my rip cut saw attachment. Instead of the euro secretary hinges I used short pieces of chain attached with eye screws for the drop down door, and I like the look and ease of the rustic black hinges versus the euro style for the doors.
This was my first ever attempt at making something real out of wood. I've only made some really basic floating coat hangars and docorative rustic pieces to set around peoples houses and a spice rack. I really wanted more of a challenge and this was a perfect place to start. I had to purchase the Kreg Jig and a couple of large clamps but once I got the hang of drilling and filling pocket holes it was smooth sailing.
The Mrs then finished it off with some lovely rustic baskets and a serving tray with all the latest Southern Living magazines.
Projects by Michael!
I built the farmhouse table and needed a farmhouse bench to match. The building plan helped make it so simple and I couldn't have done it without the inspiration of Ana White. I used leftover 4x4"s for the legs and then pretty much followed everything else that the building plan said.
I've tried to document better at: http://www.tommyandellie.com/Site/Home/Entries/2011/6/14_Farmhouse_Benc…
Thu, 06/30/2011 - 04:48
After building it, I realized that this would make a great bench anywhere. I could easily see this as an outdoor bench, around the pool, around a picnic table, along a deck, anywhere.
Sun, 10/02/2011 - 21:05
It looks so beautiful with your table, great job! I am looking to build a bench for my counter/bar. Do you think it would work to build it counter height? I am totally new to building and building a bench for my counter is my first priority.
Mon, 10/03/2011 - 05:46
Thanks for the great comments! I think you could totally make this at as a counter height bench (approximately 24"). I would be a little worried that if it was too long it could topple over easily. So if you had about a 60" length to cover, I would probably build two 30" benches that can butt up to one another.
One other thought is to make some stools.....I posted some of those from an ana-white plan as well for you to check out; http://ana-white.com/2011/06/simplest-stool-saddle-back-style
Hope that helps....let me know if you have other questions.
Tommy
In reply to Counter Height Bench by tsibiga
Wed, 02/15/2012 - 18:14
Tommy, I appreciate your helpful comments. Like how I just got it today, some priority in getting the bench done! =) I am getting back it now however.... So, I love the stools you made! I am trying however to limit the amount of things (stools/chairs) that my little kids can push around the kitchen. I am considering the two smaller benches at counter height. If I could do one at 24" tall do you think 55" would be too long? I was thinking it would be good to put supports across the length (maybe 10" or 12" from the floor?) to help stability and to use for little ones climbing up. If that makes since? Anyway thanks for your help I really appreciate it!
Modern Farmhouse Dining Room Table (with pocket hole) and 2x4 chairs with plans reposted from morelikehome.net.
Surfed the site for the right plans and dove right in. Thank you for the inspiration all!
Mon, 09/10/2018 - 11:05
I have clicked on the link the plans are not there.
Comments
Ana White Admin
Mon, 04/11/2022 - 19:36
Sweet Bed!
This is so cute, thank you for sharing!