Community Brag Posts

This is the greatest website ever! Thank you so much Ana White! Anyway, this was my first project. Our family room was a mess - shoes everywhere, coats strewn, you name it. We don't have a mud room - you just walk in from the garage to BAM, the family room. So the mess needs to be contained and organized and the Braden Shoe Drawer, Locker and Mail Sorter/Phone Charger was our answer! I would have loved to have done the locker-mail sorter-locker layout but space is limited in the room so I was only able to make one locker. I did make a 3rd drawer, per Ana's awesome wood cutting instructions and that drawer is in a storage closet. So, pay attention to her cutting instructions - she knows what she's talking about! I had some left over wood (1x10) and used that as a divider in the shoe drawer to keep each kids' shoes separate.

My husband built the seesaw and I applied the finish and covered the seats. This project was very easy and built in one weekend, including drying time for the stain. I used Minwax stain in Classic Grey and did not use a clear coat over the stain. I bought the canvas seat fabric at Hobby Lobby for $5.00 and used 2 inch foam cushion, which was about $3.00. I had some left over ribbons from another project that I tied to both sides of the handles to make the seesaw look festive for the birthday party! The project ended up costing about $50.00 in materials. My daughter Cwen loves it!

My husband built this table, making slight alterations to the plan to make it smaller. He also picked out beautiful walnut planks from a local exotic wood shop. This made the top have slightly different dimensions, too. The top is finished with teak oil and wax. The bottom part of the table was painted a solid gray. We're thrilled with the results. It's so sturdy!

I began the project by ripping 6” strips of sanded pine plywood. I attached those to the walls using brad nails and wood glue. Filled the holes with glaziers putty and sanded lightly once dry. Primed and painted to finish.  

I then had a local mill rough cut the lumber for the shelves. I stripped the bark (except one which I loved so I left it on) and sanded at 120, 180 and 220. I drilled 1 1/4” holes to fit the pipe through and finished the wood with 4 coats of Varathane Diamond Finish clear coat. 

I used Varsol and some elbow grease to remove the black coating on all the gas  pipe. 

Finally i pieced it all together! 

This is a shelf based on the fighter planes from the pre-WWII era. I built it for my son's nursery. I stumbled onto Ana White's plan "Plane Old Shelf", got inspired, and it evolved into what it is. If you have any questions, feel free to contact me.

Created from recycled decking timber

This was one of my favorite projects!!!  I never could of completed this project without the guidance of Ana's blog and Hilary From the Friendly House. Thank you!!!

This took about 7 hours over the week after work. 

This was our last furniture build to complete our DIY bedroom makeover. We have a small space, so the dimensions of the Beach Cottage Dresser were perfect. We used mostly spruce, because we were going to paint the project. We used leftover accent paint from the walls and stained the top to match to rest of the furniture we've built. This was our third project.

Well I decided to do some wall hangings and this one was my favorite all hand craftedand hand painted. Feeling inspired by wife I wrote this personal note to her "Home is wherever you are. "

Using four planks I lined them up and then made a picture frame and screwed it all together for a " farm door" look. Then I stained it and proceeded to paint it free hand.

This project didn't require much when it came to woodworking other than the wood mounted base. I have seen a few variations of pulley pendant lights on the web and thought it would be neat to build my own. I came across an old pulley and hanger at an antique mall. I bought the light hardware from a local big box store. I put some scrap lumber to use and applied some paint and stain I had around. I was hoping to make this my first custom made item to sell but once the Christmas season is over and the decorations are packed away, the Mrs. says she wants this hung in the house.Thanks for looking.

Play kitchen I made for the grandkids 

My Tryde coffe table. Fun to build and looks great! Thanks Ana!

I started this project and wasn't sure what I was doing. This is the first project I've ever built and I look forward to the bigger and better projects I will be doing. As a spent several weeks online looking for the perfect bed to build for my son, I found this web page and truly found it to be easy to follow and easy to customize.

I built the bed and bought the fabric storage boxes at a local store and decided that the lights would be a great addition. I found some LED lights on Amazon.com which were extremely easy to install. The lights added only an additional $28, total, which added a cool new look to my sons room. He uses the lights as his nightlight and I love the way it turned out.

My next project will be the king farmhouse frame.

I built this as a Christmas gift for my office partner/best friend.

This dress up center was made by me & my hubby for our daughter's first classroom. We used old shutters for the ends and added a couple inches to the bottom & front/back boards to make them all match up. We used the "get your duds on" & Cricut vinyl to make it work for all the cowboys & cowgirls in her class! The shutters open & close giving them an added interest and a teaching moment to bring in recycling!