It was time to upgrade our daughter's bed to something bigger. I have always loved the idea of platform beds and went searching the Ana White site for ideas. Needless to say, I made several modifications to allow for a huge amount of storage. The bed is designed to fit up to a queen mattress, but we went with full size since her room is a bit tight. Each drawer is 24"x24"x12" deep and mounted on 100 lbs. full extension slides. This allowed us to eliminate both dressers in her bedroom plus the hamper since one of the drawers is now for dirty clothes. I built this as two 80" cabinets and used a 3/4" plywood spacer to bridge the gap. What you can't see is the six 24"x24"x12" cubbies on the far side of the bed which allowed us to remove her bookcase and toy box. Once in place, I measured and built the footboard panel with 1x4 dimensional pine and beadboard and it is attached with screws from inside the cabinet. The headboard was last as I wanted to give her a shelf for her chargers, remote, phine, ipad, etc. This allowed us to remove her nightstand. Her small bedroom feels much larger now that this is the only piece of furniture she needs once I get her tv mounted on the wall.
Comments
denverdietrich
Wed, 12/21/2011 - 09:41
I love the tile top! I made a
I love the tile top! I made a double raised feeder all out of wood and the top gets so filthy! This tile top is a great idea!
BrennaLiz
Mon, 12/26/2011 - 13:12
Perfect for my pup!
I love the tile look you used! I have been looking everywhere for attractive raised pet bowls and have found nothing I like. I do have a few questions: is the cement board necessary? What size and type of wood did you you use for the trim and how did you attach it?
Thank you for posting I would have never thought of this myself!
In reply to Perfect for my pup! by BrennaLiz
Joni
Wed, 01/04/2012 - 12:59
Response to "Perfect for my pup"
Thanks for the feedback. According to the guys at Lowe's, you could skip the cement board and use liquid nails to attach the tiles. But the grout/adhesive that I was using would not bond to wood (and I think that may be true for many, if not all of them), so I went ahead with the cement board. This required a special drill bit for my roto-zip (to make the circle), and a special drill bit for my screwdriver (in connecting the cement to the board). I used "craft wood" trim (available at Lowe's in Pine). It's 3/8" thick and 1 1/2" wide. It's the perfect size for covering a 3/4" frame, cement board and the tile. I glued the boards together and then nailed thin brads in to secure it.
In reply to Response to "Perfect for my pup" by Joni
SWFlorida
Fri, 08/15/2014 - 20:22
Double bowl measurments
can you please help me sure up the measurements for a double bowl? I have a 1x12 (3/4 x 11 1/4), which is 24 inches long. I need the measurements for the 1x3's. Thanks
Kiomi (not verified)
Fri, 12/30/2011 - 12:28
I love these! I've been
I love these! I've been trying to find a plan to make one for my 80lb dog!
katieevans140@… (not verified)
Fri, 03/02/2012 - 20:11
How do you cut tile?
Hi. I love your post! Did you lay the tile and then cut it or cut the holes first? What tools do you need to cut the tile?
Thanks,
Katie
In reply to How do you cut tile? by katieevans140@… (not verified)
Joni
Sun, 03/04/2012 - 10:38
Katie, I didn't have a tile
Katie, I didn't have a tile cutter. I purchased a tile nipper from Lowe's, and was surprised at how easy it is to snip off the parts you don't want. I nipped it first and got it all laid out around the circular hole prior to putting the adhesive down. It helps to put the tile pieces in a vice, and then nip it. -Joni
calli (not verified)
Fri, 03/16/2012 - 10:11
loooove it!
this is awesome. our great dane has a massive drool issue (to be expected) so i've been trying to find a plan that isn't JUST wood top. problem solved. i think i just found my new christmas present gifting tradition too! thanks!
abaxter2
Wed, 03/12/2014 - 12:10
Joni, help on tile
What kind of tile did you use? Where did you get it? Thanks!