Community Brag Posts

Used the plans for the spa bench to make a easy entryway bench...

As a newly blended family of seven  people, we needed a dining room table that would accomodate our family comfortably.  With nothing suitable available locally and our joint interest in homemade projects, we searched for a plan we could work with.  We were thrilled when we found this plan, which we customized to the dimensions of our dining room. We adjusted the length to 9' and the width to 33" and went with a plank and breadboard end top.  We used a Tudor colour Minwax polyshade stain with a satin finish for the top.  To achieve the worn look of the pedestals we used a torch to burn the wood, primed it with a primer sealer, painted it with furniture andcabinet paint (Armadillo) for durability, then scuffed/sanded the desired areas with a durable 60 grit sandpaper.  Making the table ourselves allowed us to use a colour scheme which matched the chairs we had purchased.  We will add, it was more time consuming than anticipated, but well worth it!  We LOVE our new table!! 

I'd been looking for a plank-style farmhouse table for quite some time. Couldn't find what I wanted to buy anywhere (and too cheap to spend the money even if I did), so decided to make my own table. Made up my own design for the table top, and then went looking for the right legs. I liked the pedestals on Ana's design a lot, but thought 3 was too many for my project. Looking at some of the other tables that had been done with only two, I decided I didn't love the high placement of the spanning bar when done with only 2 legs. So, I moved it down to the bottom of the legs instead, and added a couple of decorative knobs to make up for the lost visual interest to the pedestal columns. I'm not a particularly physically strong woman, but I was was able to do this entire build single-handedly, with very little previous experience assembling furniture (lots of diy experience doing other kinds of home improvement projects though). Only needed a second set of hands when finally lifting the top onto the legs at the end. Fun project overall.

Final table size is 8' X 33.5". Seats 8 comfortably; can fit 10 when needed.

The table is the fancy x desk. This was my very first wood project. My first time using power tools and painting furniture. The picture frames are from Ana Whites book, The Handbuilt Home. They were my second project. This is located in the back of my frontroom. I love the color. Thanks Ana!

P.S. this was my first project, so I took my time.

Saw Ana's plan on Pinterest for the Rustic X Coffee Table and wanted it in my own home!

This plan is from Ana's book, "The Handbuilt Home." Construction was completed over a weekend but the stain and finish took some time between cold weather and family needs. We started just before Christmas and finished by Valentines. Thus Tracey's Christmastine Present.

It is a sturdy table but it has some play along the length of the table. I like the plans for the support beam from the website better but we stayed with the book plans. The Pocket Holes were great to use. I am not sure I like finish nailing and glueing the sides to the legs, it seems it needs something stronger but we will see how this works over time.

I did not like mixing Pine 1x4's with the Douglas Fir but after seeing the finished stain it has an interesting look. You can see this on the photos of the legs. The wood was purchased from Home Depot and they did not have Doug. Fir 1x4's.

We only used two coats of Poly. Tracey did not want to wait any longer. The wood is soft as evidenced by the handwriting marks in the table from my daughters homework. Hey, she is doing homework at the table! Lots of "Character Marks" to come.

Overall it was a great project and fun to complete. Looking forward to some small tables and picture frames.

Used square laundry baskets instead of regular rectangular baskets. The square ones aren't as deep but are a bit taller so I had to modify the plans. I added a backsplash and some wooden tags to the baskets to designate them for certain colors. I also added some decorative trim and finished the bottom in a gray stain and used white chalk paint for the top.

Larger than on-line plans but it got me started. The top is made of oak skids glued together for 1-5/8" thickness.

Built this around Thanksgiving before I got a miter saw so took a little extra time with circular saw but worked just fine. 

Modified the plans only slightly to include 3 seats for all our kids. On one side I put a vertical dowel rod that we can place sand weights over to counter balance the weight when all three are on it. I did use pressure treated pine for the parts that are resting on the ground so that it will last a little longer since it will usually sit in the grass. 

Kids love it!

This was a fun project. It took nearly 3 months to complete. Nights, weekends and a few finish redo's :). 

My awesome husband built this bed for our 5 year old. My son loves it!

We didn't have room for the full steps so my husband changed those to a simple ladder vertically up to the platform.

We have our rocker under the bed right now but it's really too tight to stay there. All in all a great bed!

I based this build on the Triple Pedestal Farmhouse Table found on this site.  I fell in love with the table and I just had to build one!

This table is only 72" long, so I ended up removing the third pedestal.  I also removed the decorative apron that is pictured in the original plan.  I also added a picture frame border using 2x4's with 45 degree angles on the corners. I think I like how this look turned out! I kept the legs the same size as the original plan called for.

This entire build took me about a day and the staining process another 2-3 days. I stained the table top using Varathane's American Walnut stain and I painted the base using an off-white milk paint. But before painting the base, I stained the corners with the same American Walnut stain so that when I was ready to add the distressed look, I could simply just sand the paint until the stain appeared through the white.

Visit my facebook page for more of my builds!
www.facebook.com/simplyrustik

After watching Ana White's video on easy garage shelving on FB, I knew right away it was the perfect technique for adding shelves to my laundry room.  The project was easy and turned out great!  I did the majority of the work by myself, although my Hubby did help me with some heavy lifting at the end (we had to add the shelving before the front frame due to the walls on either side). The shelving unit itself took only a few hours to build.  I painted it the following day making it a weekend project. We have considered adding trim to the front to give it a more finished look, but right now, it is serving its purpose. I will definitely use Ana's technique again.  It was simple and straightforward!  I loved it. 

I had a long empty space of wall that I wanted to fill. I wanted something similar to the Pottery Barn Ledge Shelves, but I needed it to fit a specific space so I decided to make one myself. I am pretty happy with it... I made it before I had my mitre saw, otherwise my cuts would have been a bit cleaner. So it has a bit of a rustic look to it since my cuts were all done with a hand saw. It was an easy one nap DIY! And best of all, we had all the supplies (wood, screws, nails, nail hole filler and paint) in the basement from other projects.