1. Home

Community Brag Posts

Outdoor Daybed

Submitted by Anonymous (not verified) on Mon, 08/08/2022 - 21:06

What a great project!! My private outdoor space is amazing. Thanks Ana!!

Built from Plan(s)
Outdoor Daybed with Canopy

Comments

1x2 Christmas Trees

Submitted by DebbieSC on Fri, 12/04/2015 - 08:51

I used 1x2 boards for this project. The smaller tree is the size according to plans (minus the coat rack). For the larger tree, I added 3.5 inches to each piece. 1/4 plywood on the back and used a stencil for the design. I love the way it turned out.

Built from Plan(s)
Wood Christmas Tree Shelf
Estimated Cost
Less than $20.
Estimated Time Investment
Afternoon Project (3-6 Hours)
Finish Used
Minwax Early American
Recommended Skill Level
Beginner

Comments

Entry Bench

Submitted by Anonymous (not verified) on Fri, 12/16/2022 - 06:51

I search many DIY entry benches and ultimately chose Ana White's, it was perfect what what we needed. Thanks for the vid, plans, post and tips that helped me build it. I'm currently browsing your other projects for the next one. Thanks so much

Blog Link
I'm a full-time artist, but I love DIY projects too
Built from Plan(s)
Essential Entryway Bench

Comments

DIY Greenhouse

Submitted by Anonymous (not verified) on Fri, 03/03/2023 - 16:02

Thank you so much for the plans. We enjoyed building it. We love it!!!

Built from Plan(s)
DIY Greenhouse

Comments

60" Round Table with Pedestal Base

Submitted by NachoDog on Fri, 07/05/2019 - 10:21

I modified a couple of plans I found on this site. If anyone is interested in instructions or cut list, I can post it later.

Blog Link
https://www.adventuresofjeffandsarah.com/table
Built from Plan(s)
4x4 X Base Pedestal Dining Table with Planked Wood Top
Estimated Cost
$650
Estimated Time Investment
Week Long Project (20 Hours or More)
Finish Used
Sanded everything down to 120 grit, used prestain conditioner, stained the top with Minwax coastal gray stain, lightly sanded with 120 grit for extra weathering, and then did six coats of poly while sanding with 220 grit in between coats.
Recommended Skill Level
Intermediate

Doll Farmhouse Bed

Submitted by kmatt55 on Mon, 12/19/2011 - 07:26

I made these for my two nieces and soon to be born daughter for Xmas. I used 1" hobby foam for the mattress.

Built from Plan(s)
Farmhouse Bed for American Girl or 18" Dolls
Estimated Cost
Scrap Wood = FREE, $30 for bedding.
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
Primer, Interior semi-gloss white.
Recommended Skill Level
Intermediate

Comments

Sturdy Workbench Sink

Submitted by Anonymous (not verified) on Mon, 05/01/2023 - 09:57

Used sturdy workbench plans with 2x6 cedar top for outdoor sink. Turned out much better than I expected!!

Built from Plan(s)
Sturdy Work Bench

Comments

Double Bunk with Dovetail Joinery

Submitted by Anonymous (not verified) on Wed, 07/05/2023 - 08:34

This double bunk bed has been inspired by Your plans for modern bunk bed - Side Street. To facilitate quick assembling - disassembling of beds for relocation dovetails joints with double inclined tails and wedges have been made. Because the beds has been made for orphanage/"kids in difficult life situations" I changed spacing between headboard and footboard rails to let footboard serve as ladder and in this manner reduce costs and time of construction, save place for installation, avoid tripping hasard. Thank You very much for detailed and simple plans.

Andriy Pronin, Ukraine

Built from Plan(s)
Modern Bunk Beds - Side Street

Coffee table

Submitted by Anonymous (not verified) on Wed, 10/23/2019 - 18:42

Love this coffee table. I built it for my daughter and she was very happy.

Built from Plan(s)
Rustic X Coffee Table
Finish Used
Dark walnut
Recommended Skill Level
Intermediate

Sideboard Companion to 4x4 Truss Table

Submitted by Rasalhague on Fri, 11/29/2019 - 06:17

After the enlarged 4x4 Truss Table, we needed someplace to store the dishes.  The Planked Wood Sideboard was the thing.  Not an easy piece.  This was my first attempt at "Doors & Drawers" and was a steep learning curve, but we are so pleased with the big, sturdy results that match the table.

Built from Plan(s)
Planked Wood Sideboard
4x4 Truss Beam Table
4x4 Truss Benches
Estimated Cost
$550 with Kreg hinge and cabinet knob jigs (Will be reused)
Estimated Time Investment
Week Long Project (20 Hours or More)
Finish Used
Minwax Red Mahogany Stain
Recommended Skill Level
Advanced

Wood Star Serving Tray

Submitted by LampAtFeet on Sat, 12/07/2019 - 13:41

I followed the plans for the Wood Star Serving Tray. I thought it was a little tricky cutting all the angles to the correct length. One tip I would suggest is to mark which end has the 24 degree cuts, since you'll be attaching these joints first. Any gaps in the joints can be filled with wood filler, then sanded smooth. I would say this is an Intermediate level project due to the angles and trying to attach them without the nails popping through the other board. Would be fun doing a set of 3 and painting them red, white & blue for the 4th of July. Thanks for the plans, Ana!

Built from Plan(s)
Wood Star Serving Tray or Wall Decor
Estimated Time Investment
Afternoon Project (3-6 Hours)
Finish Used
Stained with Varathane Briarsmoke, then a light layer of Dark Walnut to help give it an aged look. Sealer on top.
Recommended Skill Level
Intermediate

Comments

Vertical Herb Planter

Submitted by Anonymous (not verified) on Tue, 05/10/2016 - 20:04

Used your plans but make changes to the planters since I do not own an angle machine.  They look great and the cost was less than $30

Built from Plan(s)
Cedar Vertical Tiered Ladder Garden Planter
Estimated Cost
$28
Estimated Time Investment
Afternoon Project (3-6 Hours)
Finish Used
Deck screws
Recommended Skill Level
Starter Project

Comments

NextGreenLife

Tue, 05/30/2017 - 14:33

Can appreciate wanting to do projects but not having all the necessary fancy tools.  I need to make two of these anyway (one to give away), so going to steal this idea to make it a wham-bam quick job!

Green House

Great little project from your site!

I put PVC to the ground vs the metal siding and added a heat sink in the middle with some old computer fans.

Built from Plan(s)
DIY Greenhouse
Estimated Cost
$1,300
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
PVC
Recommended Skill Level
Intermediate

Comments

Niccador

Sat, 05/23/2020 - 17:23

That PVC heat pipe intrigues me. Can you share a little more about it? I'm assuming it pulls hot air from the upper vent, and cools it down via the section of pipe below ground, sort of like a natural A/C. Keeps things from gettting too hot during the summer months?
Kinda looks like you'd frequently trip over it though. I'd probably have run the lower exhaust right up by the edge of the door frame, or a corner.

DIY Mug Tree

Submitted by Anonymous (not verified) on Mon, 12/04/2023 - 09:23

I made this as a special housewarming gift for a family we are helping out this Christmas. I didn't need to buy anything, but I love how it turned out.

Built from Plan(s)
Cup Tree

2 Tier Stocking Stand

Submitted by Anonymous (not verified) on Mon, 12/11/2023 - 09:20

This my expanded Christmas Stocking tree. With a growing family we needed room for at least 9 stockings. I decided to hope for one more and made it large enough for 10. Decided to make the sides look more like a candy cane and added red stripes. Thanks to Ana for the ideas.

RBM

Built from Plan(s)
Stocking Stand
Seasonal And Holiday
Christmas Decor
Back