Community Brag Posts

This is my version of the hidden desk. This desk is completely made out of solid wood. The stained wood is pine and the natural wood is a mixture of oak, cherry and maple.  I still have to add shelves and door pulls but otherwise its done.

I made this step stool in around four days. It took longer because of the five coats of paint. It has two coats of paint and three coats of finish. It should stand up to many years of use. With the storage area empty, the lid dropping closed can be somewhat loud. I added felt bumpers underneath the top step to dampen the sound. It's light enough for my 18-month old to push around.

The jigsaw cuts weren't always perfect. I filled any gaps and countersunk screws with wood filler. I used a mouse sander to smooth everything out after screwing it all together. The longest part was the painting. I painted every surface, hidden or not, to protect the wood and hopefully make it last forever.

I didn't list an estimated cost because I had to purchase several tools, including a jigsaw, sander, and countersink bits. It was probably user error, but the countersink drill bit was a pain to use. The locking nut couldn't be tightened enough to keep the adjustable drill bit in place.

My husband and I decided that the best way to keep our guest bathroom makeover on a budget was to build the vanity ourselves.  

coffee table

I used upscaled plans for the table that ended with a table top of 60" x 36" that helped match our oversized couches. Fun easy project!

Our living room is long with a vaulted ceiling. I wanted to find a way to break up the length of the room visually, and Ana's ten dollar ledges were the perfect solution. They also had a great price tag!

I changed the the plan just a tad to break up our wall space, creating two ledges - one 6' and one 4' long - instead of one that is 10' long.

The only other variation we made to the plan was adding kreg pocket hole plugs (http://www.kregtool.com/solid-wood-pockethole-plugs-prodview.html) since we hung our shelves high enough to see where screws were drilled in.

After shelves were assembled, I painted them using Lowe's Antique White in satin finish. This project was easy, fast, and very affordable! I love that we can change out the items on display either seasonally or whenever we want a fresh new look. These ledges would work in any room and even instead of a chair rail in a dining room... and the lip on the front makes them safe so that nothing will slide off!

I built this for my mom to replace her small, rolling butcher block. I wanted to add in the tilt out trash cabinet, so I built off the back of it to give her some storage and a bigger work surface. I had a local countertop business custom fabricate the top out of a piece of scrap quartz (that was the spendy part of the project).

Following Ana White's Plan for a Farm Table, we were able to build our own and it turned out perfectly! We also re-purposed chairs to complete the look!

Our master closet in our home was HUGE- but pretty horrible design wise prior to this DIY.  1 light bulb fixture in a 12 foot deep closet, horrible wire shelving running the whole wall, and a pretty much horrible use of space.  As a surprise for my husband who was away for his job, I decided to create a dream closet for both of us!

I used Ana's master closet tower plans as a starting point and went from there.  I modified the towers to be wider (24" wide each) and also taller so that they would go completely to the ceiling of the closet.  I also modified the plans to allow for drawers and a pull out laundry bin on both sides of the closet, as well as shoe and clothing storage above said drawers. 

For the project I used Home Depot cabinet grade plywood for the tower carcasses and then purebond 1/2 plywood for the drawer boxes, shelves, and drawer fronts. I purchased the Kreg Shelf Jig and Rip Cut guide for this project and both proved themselves invaluable until I get a table saw (HINT HINT Hubby).  

For the trim I used 1 x 2 furring strips and 1 x 4 lumber for the decorative cut outs above the 4 tower units.  I also used cove moulding to tie in all the sections of the closet with one another.

I painted the main towers white (as well as the wall to encourage the appearance of "built in) and then stained the shoe and clothing shelves dark walnut with a few coats of satin POLY to finish. 

For the back wall I purchased target contact wallpaper and installed that- as well as a wall mirror so I don't have to balance dangerously on my bathroom tub to see if my shoes match my outfit anymore.

All in all, the project took about 3 weeks to finish.  I was lucky that my mother was around the first few days of the project so that I could do the demo work and at least get the one side of the closet framed in, as the rest of the project was completed during "nap time" for my (NOSY) toddler.  

In the end, we are both estatic with how this project turned out - I installed a valet bar and a pull out tie/belt rack for the husband and that add an even more "custom" touch to the closet...

I've posted many more photos to my blog detailing this closet reno- www.thesewchicmommy.com if you want to see a more "step by step" build. 

Project cost: $750-800 ( including paint, mirror, wall paper, all hardware, lumber etc) 

Time: 3-4 weeks 

This is my own desing and was quite a challange. 

We had been looking for a headboard for our son for the longest time, but could never find anything we liked in the shade we needed in the stores. Fell in love with this bed, thought it was one of the more "boyish" styles that I've seen which was what I wanted for my son. Asked my husband if he thought he'd be able to build it, he said he'd try and voila! We, however, modified the plans a bit and only made a headboard, but overall, I love it!

This was my first ever Ana White woodworking project.  It was also my first time using a Kreg Jig.  I had a ton of fun and can't beleive how great it turned out!  I learned a lot while building it so I'm sure I will have even more success with my next project.  I highly recommend this project for first time beginners looking for a huge feeling of accomplishment and personal satisfaction. 

Thanks Ana!

Anthony

http://wholesteading.com

We made a modified (and scaled down) version of this dollhouse. Check out our blog for a complete list of details, plans, dimensions, furniture plans, and a downloadable sketch-up file to help you in building this. SUCH a fun and wonderful project. This was a Christmas gift and we are hoping it will be around for years to come! Thanks Ana.

http://www.thoughtcomics.com/projects.html

Have fun! We are beginner builders but it took us quite some time to build this. 20 Hrs...??

Email any questions!

Wanted a chest of drawers with Deep Drawers.  As the drawers were so deep I used some scraps to fit supports to the undersides of the drawers as shown in one of the photos.  I knew the drawers would be stuffed to the brim and would need to be quite strong.  On the bottom two drawers I fitted three supports from scrap 1 by 4 and 1 by 6. 

On this piece I didn't bother covering up all the internal pocket holes like I normally would either and it looks a bit of an ugly duckling on inside but once top is on and drawers are in you cannot see anything.

I thought the natural colored backing gave it some interest too.

Happy to share my plan with anybody who wants it.

I got the legs from a old dining table my mom had that was damaged in a move so when i saw this plan i knew this was perfect. So simple and easy to build, yet everyone who sees it is in love with it. Thanks Ana!