A toy box for Sam, the car enthusiast
![](/sites/default/files/toy%20box%20blue%20with%20racetrack.jpg)
This is a toy box I made for my cousin's son for Christmas.
![](/sites/default/files/top%20of%20toy%20box.jpg)
This is a toy box I made for my cousin's son for Christmas.
Wanted a couch that could also fix my storage issue for all my paperwork. I saw a plan for a filing cabinet bench and some plans for a storage couch and used them as inspiration to make my own. The railings are made with PVC pipe because of my budget, they hold up under my weight, but probably wouldn't work for a heavier individual. I'll eventually upgrade to iron pipe when it's in the budget. Still trying to figure out what to do for the armrests.
My Biggest build so far. We have a large living room and needed something large for that wall. I really had fun on this one. It took longer than I wanted but in the end, I’m really proud I finished. This was my first time to use the router and learned how build shaker style doors. -Instagram.com/theorthfam
Easy Peasy!
Materials & cost: Framing grade pine and 1x3 furring strips. $110 including finish materials.
I used some of the excess 2 x 6 that I had left over to make the feet square instead of just using 2x4s like in the plans. just cut them to the same length as the 2x4 feet, then butt them up against the 2x4 feet and mount them to the frame.
Also, I made the support beam removable by using face-mount 2x4 joist hangars to hold it instead of bolts.
Total build time = less than one week
Next project will be a custom headboard for it..
I built this for my sister in law this Christmas from Ana's plans. I can't wait to make a second one for myself! The overall build was easy and I would consider myself a beginner level. Sadly, I didn't get a picture of the final product before I gifted it, but I distressed it to allow some forgiveness in the white paint detials and hand-painted decal on the top. It turned out great and they loved it!
Made this out of a ton of scrap wood I had laying around. On the downside it made the project more difficult, but on the upside all I had to buy was hinges and handles...
Awesome Tree Swing built in about an hour! Super easy plans to follow. Two quotes of Stain and Three coats of exterior Poly!
I saw Ana's tilt trashcan plan and I knew that I had to tackle this bad boy. I didn't want anything stationary because my 1910 kitchen is big but also pushed against the walls. My stove is 7 steps from a counter top so prep is kind of a pain.
I modified Ana's original plan to be taller and even (well, close) with the stove's height for extra counter space. I also wanted a slide out cutting board with a hole so that while I'm chopping my ingredients, I can scoop it into the hole that drops directly into the trash.
I'm a very ambitious girl who doesn't like to be told that I can't do something. This is also my second built....my first is a huge craft supply cabinet made from old barn wood that is lovingly referred to as 'The Outhouse'. My tools are limited to a 7in circular saw, drill, and Kreg Gig. I knew this would be tough but after a few head scratches, I have a pretty cool island.
If you have questions about what I asked, please ask. There are all types of wicked little tricks/fixes in this beast.
Sun, 09/21/2014 - 08:11
we are about to start building and island based off this plan as well and i love the holy cutting board idea. do you have pictures of that or advice on how to accomplish it? we plan to make it twice the width with two trash cans. ( we have 5 kids= lots of trash!)
Used your plans to do these for our mudroom I just remodeled.My wife loved them.Took the original plan and modified it to fit the corner.The bench ended up being white with a grey top.And for xmas my step mother made cushions for it.Love your plans.Thanks
Balustrade Coffee Table made of cedar and pine wood. Approximately 49.5 length. Stained in special walnut and white painted chalk paint base. Used dark wax to distress base and legs.
Unfinished pine bathroom tower shelves. I assembled all pieces with kreg jig and pocket hole screws. It was a quick and easy project.
I needed a new laundry system, and thank goodness I found Ana White's projects on Pinterest! I incorporated the laundry sorter and added casters to the bottom as well as a paper towel roll on the side since it is next to the sink. I also used a modified version of the washer/dryer platform into my space. It does not have the bottom platform and the 4x4's are inside the 2x4's and attached to the platform as well as the 2x4's. Sterilite makes organizer drawers that fit exactly in the opening of under the platform. And, voila! New colors, new organization, new light bulbs :0), new laundry room!
Sun, 02/24/2013 - 12:48
Great job! Looks much better and I bet it's a lot easier to get laundry done now.
Wed, 02/27/2013 - 19:18
That looks like it was a lot of work, but totally worth it!
We modified the original plnas to convert one set of front shelves into thread storage. We used 1/4" wooden dowel cut to fit 2 spools of thread on each.
Made this for my 14 month old, this was my first ever attempt at making/building anything! Hand painted and assembled with inspiration from the Tennessee Titans. My son loves standing in it by the window watching the trucks go by our house so I added his own jungle gym steering wheel and bike horn.
For my first solo project this table had enough challenges to keep it interesting but not overwhelming. I love how it looks in my home.
Here it is. Our first building project (not attached to a wall) that we used plans for:) I am so happy with the way it turned out. We had been looking for a bench for months. I was thinking that I would find something I like, refinish it and then upholster the top. But then I came across this post from a wonderful blog (that I will be using TONS more ideas from) and knew that this was going to be our bench:) I am happy to say that I think I have finally found a hobby that we can ALL get use to:) The kids have fun, we have fun...and we actually walk away with a finished piece! Love that!
Thank you so much Ana for this plan. Our 2 year old is too big for a high chair and will not use a booster seat. He wants to be like his older sibilings and use a real chair. This was perfect because it is a real chair (no booster seat) and then we put a Mickey Mouse on the back and he absolutely loves using it now.
Sat, 01/03/2015 - 16:46
This chair is just darling with that Mickey Mouse on it! You did a great job!
What a fantastic plan. I made one for my granddaughter. It has two advantages over the doll house I made years ago. (1) It can be unstacked and shipped. This one will be shipped. (2) It allows the child to restack and rearrange rooms. My grandaughter loves to rearrange things. It is an "engineering inclination" according to her mother. Well, she can rearrange these rooms as many times as she likes.
I made only one change to the published plan. I expanded the rooms to 8" wide, 8" high and 16" long in order to accommodate a piece of furniture my son-in-law had already made. Maintaining the 2-to-1 ratio keeps everything fitting together well.
Thank you again.
Step stool to match our living room set. Thanks Ana white for the plans!
Like many others have mentioned, I wanted a 36" high table so I could use it as a bar. Ana mentioned that it would be too wide at 15 degrees so perhaps 10, after busting out some trigonometry I found that 10 degrees would give you about a 16" base and 15 would give you a 24" base. So, 12.5 degrees it came to be if you want a 20" base.
Many have said it takes 4 2x2's, that definitely holds true with this modification.
Here are my measurements, otherwise the cuts and assembly are the same as the original:
All angles are now 12.5 degrees rather than 15.
The legs are 33 3/4" from end to end
The outside edges of the legs should come to 20 1/4" wide for the base.
The stretcher will stay the same 13 3/4" on the bottom length, just cut at 12.5 degrees.
The stretcher is now 7 3/8" up from the ground, I found it was easiest to measure 7 1/2" up along the inside of the legs and line the bottom of the stretcher up at this mark.
And that's it!
A tip I used was clamping 4 2x2's together to get all the legs even, this only works if you have a sliding compound miter saw. I also recommend doing the straight cuts first and then leave the saw set at 12 1/2 degrees until you finish the project, this will keep cuts consistent.
Other modifications I made were to shorten the depth to 16 1/2" and use 2x6's for the top, I needed a narrow table in the room. I also made the depth of the sawhorses only 15 inches so the top would have a 3/4" overhang in front and back, I think this cleaned up the look some.
I loved this table the second I saw it and knew I had to build it. The only modification I did was adding an additional 2x10 to the table top to increase the width. It is a pretty substantial table but the table top is a really good size (makes folding laundry awesome!).