Community Brag Posts

Built it for our recently arrived baby !

I made the back the same as the sides, the top has router edge and the drawer has a front that was routered.

I used crib size mattress instead of twin to make this bunk bed. I wanted more stabilty so I modified it with more rails at the top and didn't make a brake in the front rails.

For my first 'Ana White' project I built two Lydia daybeds for the guest room. I added beadboard for a cozy feel. I LOVE them and so does everyone else.
Thank you Ana, for these easy to follow plans. I have discovered a wonderful new interest and I BUILT THEM ALL BY MYSELF!

Modified Ana's plans to omit the chalkboard and make larger.  Measures 75"h x 36"wide.  All 1x2s, cuts are 2 @ 75", 2 @ 34 1/2", 2 @ 73 1/2", 2 @ 31 1/2".

I made this bed from Ana's http://www.ana-white.com/2011/09/farmhouse-storage-bed-storage-drawers.

We have an abundance of Ash wood here (result of Emerald Ash Borer). Although the bed is very heavy, it'll sure last! I made a few changes from Ana's plans only as I had dovetail jig etc for drawers.

custom size entry cubbies x 2, open top locker section with small basket, bench base portion with two baskets

This is the second building project I made. I really like that it's small, but there's a surprising amount of room in it for towels and stuff. And easy to build, too!
Thanks Ana!

Lots of modifications - first, from a safety standpoint, I wanted more exits on the lower bunk. I built two versions of the front, so they can get in and out on both sides. I also added a ladder on one side because I'm not going to build the stairs for a few weeks. I have a firefighter friend who has warned me of some safety aspects, including not to put this up against a window. There's 3 feet clearance from this bed and the window. So, still to paint and decorate it, but that will happen later.

We started with the clubhouse bed but were concerned our three year old may be just a hair too young to sleep up top. We surrounded the bottom and placed some 2”x2” and plywood underneath to keep his mattress off the floor. Wrapped it up with fairy lights strung all around top of the inside. Turned out great!!

I made this two years ago in my daughter's room, before I got to know Ana's site. This was my ever first carpentry project. It took me 4 whole days to finish. The whole wall is like a bay wall so I had to custom make the built in. Also – I did that when my husband was out of town so in order for me to be able to lift all the pieces from the basement to the second floor, I made it of 4 pieces. When my husband came back home he thought I paid someone to built it.

I made it out of 2x4’s and plywood. I trimmed the bottom with a trim.

One day I will add drawers and the cushions are in the making.

So, so happy with this table! I've always been a fan of the Pottery Barn Bedford Project table, but even if I had the $1,200 to spend on a craft table I doubt I could ever justify it. When I saw these plans I knew my dream table was within reach!
This is my second build using Ana's plans. I worked carefully and used the Kreg Jig, and it came together easily. I added an extra trim piece here and there. I painted the whole thing with Valspar color "Storm At Sea", which is a gray. It took forever for me to choose the color, too many choices! Then I used some wipe-on Poly to protect it.
Now my kids and I have a dedicated art station stocked with all the supplies, I can see us spending many hours creating at this table.

This is the first time I have ever built anything and I'm very pleased with the results. The stain is water based 'charcoal gray'. It took 2 - 3 rounds of sanding, one coat of pre-stain, two coats of stain, and 3 coats of polyurathane. Total investment was about $350. It took me 3 months (I didn't have but an hour here and an hour there to work on it). My main concern was that I make it so that the screws were not visible. So I drilled a hole the size of the head of the screw about 1/4 in deep (then the typical pre-drill for the actual screw), screwed it together, then glued a wooden 'plug' in the hole. I'm very happy with the result of that. I also struggled a bit with how to attach the side rails - I ended up using 2 door hinges at each corner. The bed frame is completely separate from the mattress. I have a metal frame that is working fine, so the wooden frame actually does not touch the metal mattress frame. It is just built around it. Tools I used: Hammer, Paint Brush, Electric palm sander, Miter saw and a drill. The miter saw was huge for this project. 

Hello everyone, today I’m sharing details on something I built recently: a Bailey Chair for dogs suffering from Megaesophagus.

Dogs with megaesophagus have an enlarged esophagus. This makes swallowing food difficult. Eating while in an upright position helps and the task of keeping the dog vertical is easier when the dog is sitting in a Bailey chair.

This blog post is less of a detailed how to and more of showing in progress photos. Adam, over at Lazy Guy DIY, has put together a great tutorial on how to build the Bailey Dog Chair. I followed his instructions with very few modifications.

CLICK HERE to read my build details and see more photos!

I have waited ten years to get the table I wanted for my back porch. I have 6 kids and wanted a LONG plank table. When I found Ana's page I knew I had what I wanted. It was so easy and exactly what I wanted. I extended the top to 10' and added a middle leg to accomidate the length. This was so do-able following Ana's plan. Don't be intimidated! It is AWESOME!

My sister and brother-in-law recently moved to Albuquerque and purchased a home with a wonderful view of the Sandia Mountains. I built them the mirror from The Handbuilt Home (p. 36), and they hung it in the entry hall. The reflection in the mirror is a gorgeous view of the mountain range out of their large living room windows. Because this was not a rustic build, I used better pine boards, sanded very smooth.
Thank you to ANA for the great plan (and book!). Also a great big hug to JOANNE and TRACY for responding so quickly to my query regarding attaching the mirror to the frame. I ended up having the mirror company attach the mirror with silicone because I was afraid mirror clips would mar the smooth, shiny surface of the wall. We also covered the back of the mirror with craft paper, contact cemented to the frame to protect the mirror silvering.
This was a fun build, and my sister and b-in-law are very pleased with it.

We added additional trim to the top and also a thin trim across the front of the shelves to hide the raw edge.  For paint, I used a grey chalk paint and then wiped an antique white chalk paint over it. I had stained the edges before painting and lightly sanded the paint off of the sharp edges so you see minor amounts of exposed stained wood.