Crib size mattress bunk beds
![](/sites/default/files/bed1.jpg)
I used crib size mattress instead of twin to make this bunk bed. I wanted more stabilty so I modified it with more rails at the top and didn't make a brake in the front rails.
![](/sites/default/files/crib%20bunk%20bed_0.jpg)
![](/sites/default/files/step%203_2.jpg)
![](/sites/default/files/step%205_1.jpg)
![](/sites/default/files/step%206_0.jpg)
I used crib size mattress instead of twin to make this bunk bed. I wanted more stabilty so I modified it with more rails at the top and didn't make a brake in the front rails.
For my first 'Ana White' project I built two Lydia daybeds for the guest room. I added beadboard for a cozy feel. I LOVE them and so does everyone else.
Thank you Ana, for these easy to follow plans. I have discovered a wonderful new interest and I BUILT THEM ALL BY MYSELF!
This took about 7 hours over the week after work.
Working a full time job, I was still able to finish each table within a week (taking a couple hours a day to cut, build, sand, burn, stain, ect). These are my second and third tables that I’ve ever built and looking forward to making more.
This is the second building project I made. I really like that it's small, but there's a surprising amount of room in it for towels and stuff. And easy to build, too!
Thanks Ana!
Kentwood bed
So, so happy with this table! I've always been a fan of the Pottery Barn Bedford Project table, but even if I had the $1,200 to spend on a craft table I doubt I could ever justify it. When I saw these plans I knew my dream table was within reach!
This is my second build using Ana's plans. I worked carefully and used the Kreg Jig, and it came together easily. I added an extra trim piece here and there. I painted the whole thing with Valspar color "Storm At Sea", which is a gray. It took forever for me to choose the color, too many choices! Then I used some wipe-on Poly to protect it.
Now my kids and I have a dedicated art station stocked with all the supplies, I can see us spending many hours creating at this table.
Turned out okay, still have some learning to do!
Sun, 01/08/2023 - 10:43
Thank you for sharing, there is always learning to be done, you did it!
I have waited ten years to get the table I wanted for my back porch. I have 6 kids and wanted a LONG plank table. When I found Ana's page I knew I had what I wanted. It was so easy and exactly what I wanted. I extended the top to 10' and added a middle leg to accomidate the length. This was so do-able following Ana's plan. Don't be intimidated! It is AWESOME!
My sister and brother-in-law recently moved to Albuquerque and purchased a home with a wonderful view of the Sandia Mountains. I built them the mirror from The Handbuilt Home (p. 36), and they hung it in the entry hall. The reflection in the mirror is a gorgeous view of the mountain range out of their large living room windows. Because this was not a rustic build, I used better pine boards, sanded very smooth.
Thank you to ANA for the great plan (and book!). Also a great big hug to JOANNE and TRACY for responding so quickly to my query regarding attaching the mirror to the frame. I ended up having the mirror company attach the mirror with silicone because I was afraid mirror clips would mar the smooth, shiny surface of the wall. We also covered the back of the mirror with craft paper, contact cemented to the frame to protect the mirror silvering.
This was a fun build, and my sister and b-in-law are very pleased with it.
Tue, 10/01/2013 - 18:11
Linda, your mirror looks fabulous! The finish is just gorgeous, and I love the hardware you used. Beautiful build! :)
Tue, 10/01/2013 - 18:20
Thanks for the nice complement, Joanne. I really do appreciate your help!
I made this 4' tall reading lamp by modifying the adjustable height bolt bar stool plans. I had to modify most of the measurements on the fly but I think it turned out well! It's a bit too cold here to stain it, so I'll do that (and tuck the cord away nicely) in the springtime. Love this site! So many great ideas and plans to be found. I recommend it to friends all of the time!
This was our first ever building project. We our so happy with the results. Read more about it at http://www.sidetrackedsarah.com/2011/09/build-your-own-dining-room-tabl…
Sun, 10/02/2011 - 05:21
Wow guys, what a great job! And only 1 day, thats amazing. This is on our to do list as well but lots of other "important" kiddy things to do first :) Was there anything when building you would have done differently? Any tips you may have :)
I slightly modified the X Shelf plans, using 2x2's (actually ripped my own from 2x6's since the only ones I could find were in horrible shape). The X's were a little trickier than I anticipated, but well worth it! I really like the look using 2x2's vs. the chunkier 2x4's.
Fri, 10/04/2013 - 08:57
I'd actually considered going down to 2x3s instead of 2x4s, but the 2x2s look great! Awesome Job!
Fri, 12/27/2013 - 20:11
Love this! The color is amazing, and I love the 2x2 build.
I built this above toilet cabinet for my son and his wife for Christmas. They moved into a new house and wanted this additional storage space. Turned out pretty good!
Made legs 16 inches to bring to height suitable for the mattress I had. My first project ever using Kreg K5.
I built the farmhouse bed and needed side tables. These worked out great. Very easy to manipulate sizes to make larger
I love to sew and create new things so I decided I would make a leather upholstered ottoman. Leather is extremely easy to work with!
I started by sewing together leather rectangles that I purchased from an online auction.
When that was complete I determined the size of the box, foam thickness and the overall height I would like for it to be, I created/designed as I went.
Other than the upholstering items (buttons, needles, foam, batting, leather) everything else was scraps that I had and was able to reuse to create my ottoman. I added a shelf below for storage and am glad that I did it is a great place to put magazines.
It ended up taking much more time that I planned because I didn't follow a definite plan. Now that I have completed one I am sure that the others will take much less time. I am so happy about how it turned out!
I gifted it to a friend for a housewarming and she loves it! It even matched her area rug; apparently it was meant to be!
This is my first woodworking project and when I saw the plans, I knew it would be perfect for an indoor study and work bench for my hubby. Not having any power tools except for a drill and two sanders, I went to Home Depot and they were obliging and patient enough to cut my lumber for me (I loved making the bench so tools will be next on my list). The plans were easy to understand and since Maths is not my strong point, I was happy to have something so easy and methodical to work with. I loved the extra shelf on the top and the larger one on the bottom.
I made 2 modifications:
The height of the front legs are 33” instead of 36” because I wanted it at wrist height for my husband on the current stool he has in his room. I kept the back legs at 48”. I forgot to account for the 3” difference when I was assembling the lower shelf, so I ended up taking a hacksaw to the base of the 4 legs after assembly to account for this and this explains why the bottom shelf is so low to the ground. But it works!
Hubby wanted something attached to the back of the bench to protect the wall behind from spills. He also wanted a smooth shelf surface where nothing could get stuck in small spaces. The shelves also needed to be able to take weight and being a newbie, I didn’t want to mess with the measurements too much. After assembling the bench (including the back supports), I purchased a large 3/8” sheet of plywood and had it cut into 4 pieces – two for the back spaces and two for the shelves and then used screws and glue to attach those to the piece. The one thing I should’ve done was purchased 1 ¼” screws for attaching the plywood to the shelves, because I overlooked it and they went straight through to the underside of the shelves and had to have someone cut the screw ends off, which was no small feat.
But overall, I was very pleased with the way it turned out, especially for a first-time project.
Comments
Guest (not verified)
Thu, 12/01/2011 - 18:21
Shopping list?
Do you have a shopping or materials list for this?
[email protected]
LifeofChaos
Sat, 12/31/2011 - 18:41
shopping list
No I don't. Not off the top of my head, it has been a few months and I am afraid I would miss something. However, it does appear I put everything except the screws (1.5 inch, I think) in the drawing.
FullOfStitches
Wed, 04/03/2013 - 10:19
Distance to top bunk
How far from the ground is the bottom of the board holding the upper bunk?