Fun project
![](/sites/default/files/IMG_20180128_100252086.jpg)
We used the plan from the basic open base collection. I attached four and left two unattached.
![](/sites/default/files/IMG_20180107_150806395.jpg)
We used the plan from the basic open base collection. I attached four and left two unattached.
I have to give a massive shout out to Anna White and to all the other folks who did their own variation on the Salsa Console Table.
I started this project before my daughter was born, and needless to say, that turned it from a "couple of weeks" project to a "most of the year" one!
The good news is that in taking my time, I was able to think and re-design and that made the final project so much better! I kept the original idea of a 'criss-cross' wine rack, elevated the drawer/cabinet design with shaker-style joinery, and laminated the top myself (sooooo happy with how that turned out). I made the extra bits of trim around the mid-section and base myself with a router and scraps from the drawer faces (since trim is so expensive at box stores)
Lastly, the finishing involved two of my very favorite products: Benjamin Moore Advance for the body(expensive but diamond-hard finish) and Varathane Poly Stain and Seal (there is just no substitute for slow-drying oil finishes on tabletops - so smooth and rich in colour)
All in all, the project cost me around $600 (high prices of wood during Covid to blame) but there is just no substitute for doing it yourself, and since most solid wood buffet tables run $2000+ I still came out ahead.
Cheers fellow woodworkers!!!
Fri, 04/01/2022 - 09:35
WOW, you did amazing, love the finish choices and all the little details! Thank you for sharing:)
I am going to be making more of these, but I just loved how they turned out. The cushions were ten bucks at Target.
I built this for my daughter, and she loves it! Looks great and feels even better to relax in. Now I'll have to build one for me, 'cause she's not sharing
So thankful for these plans! My daughter requested a cabin loft bed that could double as a "crafting nest". I only had to make a few architectural modifications, but I built this by myself in five days, so I would say it's a very DIY-friendly build! My daughter loves it and it adds functional and aesthetic appeal to the room!
I used the 2x4 modern Adirondack chair plans. I made it entirely from old treated lumber that came from a deck I tore down. All decking boards and 2x10 beams that I ripped to size. The finish is burned.
I built two of these benches for under $30 of lumber and supplies. They were great Mother's Day gifts that thrilled my mom and mother-in-law. I will have to upload pics of the other one soon. It's already at the lake house and painted a beautiful barn red.
This is my first real project that I took my time on. Actually my first real project ever. I wanted to replace my Ikea console table because it has started to bow (Ikea furniture does not fend well on moves). I modified the measurements and this is now 24" wide 18" tall - same length. Solid piece of furniture. I could not find all the lumber, but I improvised. Since this was my first project, I could not get the boards to match up all too well, and I do not have a chop saw that would cut a 2x6 - when I placed the 2x6 I did not like the look so I swapped it out with 2x4's.
I used Rustoleum black lacquer spray paint. I like how the grain came out, however, it took way too much spray paint. I will consider using black latex paint next time.
I have since applied 2 coats of poly and sanded it down and steel wooled it - and finally a coat of paste wax to preserve it. If I do not like the imperfections, I just might make it an outside patio table.
Thank you so much for these plans, I spend 3 hours at work looking through all the plans on you site. I even have bought the lumber for my next project - an outdoor table (same design) so that I can use it next to the grill as a counter surface and wire baskets.
***UPDATE*** - I finished the table, however it came out 4" less wide than the old table, however I was able to re-purpose it and use it as an end table for one of the guest bedrooms. The table could have come out a little better, I guess I can only get better!
Again thank you!
This rustic modern version of a pub table has multiple uses - it can rest along a wall to make a 16 foot long bar, or rolled together to form an 8 foot long pub table. It is standard counter height 36" and will accomodate seating for 8-10 counter stools. If you don't have live edge wood slabs, you can also use construction lumber (2x8s or 2x12s) to achieve similar dimensions and versatile use in a more cost effective way.
Fri, 07/31/2015 - 04:10
Awesome idea! I think I will have to try for a dining table version of this table. Do you happen to have a way to lock the 2 pieces together?
Always wanted to build my own bed frame and this was it. Let me start out by thanking Ana, for her great plans. I also wanted to say that even with lumber prices at high prices, does not mean quality lumber! The big box stuff took a lot of prep to become workable. I purchased the 4x4 posts from a local guy with a small saw mill. They were actual 4x4 inch, so some measurements needed to be adjusted.
Very satisfied with the outcome as visible by the inspectors in the last picture! Our plan is to finish it in a flat whitewash finish topped with a matte poly. This piece of furniture is stout and will last generations.
I really loved the inspiration Vintage Step Stool when I saw it but what I really needed was a single step step stool to place in front of the sink vanity in our downstairs bathroom. I have had a cheap plastic Sesame Street one there for the longest time but I hate it because it's so, well, baby-ish! Also, I wanted something that was only 5.5" high so that we could still open the vanity door without the step stool getting in the way and without having to move the step stool first. So, I printed out the plans for the Vintage Step Stool and I played around with it - I drew my version, then drew it again using MS Publisher and printed out a template for the sides. I used a 1 x 8 x 4 to cut the sides and top and a 1 x 2 x 4 to cut three supports. I also splurged and bought a pocket hold jig jr.!! I used a jigsaw to do ALL of my cutting. The completed size is about 9.5"d x 11"w x 5.5"h. This is the first thing that I have ever designed and built myself and I just have to say that I am sooooo proud of myself!! I can't wait to show my dad!
Tue, 06/07/2011 - 11:14
Perfect fit for your space and love the finish! Turned out so good! Love it!
We gutted our above garage apartment a year ago and have been DIYing as much as is reasonable inside. We installed Allure Ultra vinyl flooring throughout, which is thicker than the old, chipping peel and stick vinyl there was previously. Instead of planing the previous termite eaten hollow-core door with heavy, less-than-secure glass jalousies, we decided to build our own entry door.
We were able to use orphaned 2x6s in my mom's garage and old trim we saved from gutting our apartment. The choices we made amounted to a total of about $150 for this door, including basic door hardware and $70 plexiglass. The hardest part was spraying the plexiglass, as I'm a rather unsuccessful spray painter.
We appreciate having our custom door, and we hope someone else in need of an entry door is inspired to save money and try one out too!
Lockers for the whole family
Mon, 01/25/2021 - 14:54
The plans linked is for a piece that is nothing like the picture here. I’ve noticed lately your website has incorrect links, the pdf print option doesn’t work, and the focus seems to be less on the plans and more about selling your pre-cut stuff. Very disappointing.
My 11 year old followed the plan and directions by you Ana!!!! We just helped him a little bit and we are so proud of the end project. The kids love it !!!!
Thank you Ana
Thu, 04/21/2022 - 15:11
He has a bright future, and look at that smile, that just made my day! Thank you for sharing:)
After moving into my new house, I found this great blog and began dreaming of building furniture! I am finally trying it out. Since I didn't know the first thing about power tools and wood-working I wanted to start simple. I bought some 48" pieces of 1x4 and 1x2 in pine, spray painted some old frames and used some of my wedding pictures/momentos and voila...my first project was done! I will be making many more of these easy and pretty shelves! Now to find a wall to put them on.
I followed the plans for the dress-up center. My daughter loves it and picked out the paint color and princess decals to decorate it.
I made this dresser to replace two cheesy dressers my wife and I had when we first moved out on our own. The style was taken from the Madison dresser design. I added two more drawers as we were condensing two dressers to one and I wanted to ensure I was able to use it!!
I wanted this to be more permanent and stable so I used two screws each in all the bottom attachments,added a brace in back and secured it to the wall. I used a square piece for the top rail and made the whole shebang equilateral so it’s little more squat and stable.
My wife wanted a eat at bar/cabinet for the basement family room. So after several design ideas this is what we come up with. It was a pretty simply build, built the frame using Kreg pocket holes to attach everything together. Love the Kreg pocket hole. Then cut the1/4” panels and attached them to the inside with brad nails. The top is a 1 x 24 glue board from Menards. Then some paint, stain and poly , attach the top and its ready to go. I used a water base poly for the top, it is great if you want to apply several layers quickly. Sand the poly after a couple layers with an 800 grit, then apply a couple more then repeat until you are happy with the finish.
Why not build this tiny table? It will only set you back about $20! It takes about 10 minutes to build! And the plans are extremely flexible--not to mention forgiving!
But I knew that rustic was not the way to go for my new guest room. I needed something a little more feminine--french-inspired, EVEN! So I decided to stain it ebony and paint over in a satin white. The result was great!