Community Brag Posts
Grid Style Mug Shelf
![](/sites/default/files/cup%20shelf3.jpg)
Built Cup storage shelf after adding a new set up cabinets and wood countertop.
![](/sites/default/files/cup%20shelf1pin.jpg)
![](/sites/default/files/cup%20shelfpin.jpg)
Sturdy Work Bench
![](/sites/default/files/3154813050_1343621953.jpg)
I built this sturdy work bench to complete further projects off the ground! It's helped me to be organized, keep my tools together and stretch these legs!
This project is excellent for a first time builder. Mistakes don't matter much, it's pretty straight forward and easy, doesn't require special cuts. Allows you to practice measuring, cutting, drilling, etc.
Comments
Square(-ish) Version of the Balustrade Coffee Table
![](/sites/default/files/3154845846_1400871662.jpg)
I loved the RH-inspired Balustrade Coffee Table that I built for my parents, I decided to make one for our living room! Ours had to be more of a square though, to fit our space more appropriately, so I modified the dimensions. This affected our shopping and cut lists, of course. Check out the blog post for more info.
![](/sites/default/files/3154845847_1400871662.jpg)
![](/sites/default/files/3154845848_1400871662.jpg)
![](/sites/default/files/3154845849_1400871662.jpg)
![](/sites/default/files/3154845850_1400871662.jpg)
![](/sites/default/files/3154845851_1400871662.jpg)
Loft Bed In Natural Hardwood
![](/sites/default/files/IMG_1384.jpg)
I needed to build a loft bed for a small room that has a nine foot ceiling, I wanted to have ample storage room below, but was concerned about a ladder that would stick out at an angle taking up a little too much precious real estate in the small room. Using Ana's great Sketch Up plans, I modified the design by incorporating a fifth leg as a permant addition to attach the ladder to. Part of the appeal of Ana's design was the ability to take apart the bed if it ever needed to be taken out of the room it is installed in, and the ladder became a part of the foot board end, perhaps a little unwieldy, but still able for two people to lift and move.
As a self-taught woodworker, I wanted something a little nicer than standard pine boards, and since we have a nice local hardwood supplier in our town, I was able to buy some nice red oak in a 13/16" thickness. This project gave me the opportunity to use the planer that I bought some time ago but hadn't really used very much, so I ended up milling all of the wood to bring all to a uniform thickness. In gluing up the legs, I used a spreader and a lot of clamps so that there are no screws, staples or nails joining the boards, just a lot of Titebond II.
For the ladder itself, I cut dados in the upright edges of the ladder and attached the treads with 2" wood screws along with a liberal amount of glue. I had a slight miscaculation on the width of the ladder, so in order for it to fit in between the two legs, I had to plane away a small amount of wood, which you can see the end of in the last picture, the close up of the ladder.
After a fair amount of sanding and a round over bit in my palm router to break all the exposed edges, I finished with three coats of polyurethene. The bed was assembled in the room using 2" wood screws which I had pre-drilled when I dry-fitted the bed out on my driveway. There are three screws in each corner of the mattress board and two screws in each corner of the railing. The short section of the front rail is also attached with screws so it can be removed as well if the bed is ever moved. I finished the installation with three, six inch lag bolts, two higher up going into wall studs, one near the bottom bolting into the wall plate on the floor. The bed was very solid, but has been made even more so with the addition of a bookshelf spanning the width of the footboard, and it is as deep as the ladder is wide. I offset the side of the bookshelf on the ladder side to allow for a two inch gap so your toes can overhand the ladder treads when climbing up or down.
![](/sites/default/files/IMG_1385.jpg)
![](/sites/default/files/IMG_1390.jpg)
![](/sites/default/files/IMG_1389_1.jpg)
![](/sites/default/files/IMG_1391.jpg)
Simple modern outdoor chair modified to match my porch.
![](/sites/default/files/20200606_120113_0_0.jpg)
I built a set of these chairs based on Ana's simple modern outdoor chair. I wanted it to match my front porch which I built a few weeks ago. Thank you for the plans.
![](/sites/default/files/IMG_20200606_121439_390_1_0.jpg)
![](/sites/default/files/20200606_120926_0_0.jpg)
![](/sites/default/files/20200606_115934_0_0.jpg)
![](/sites/default/files/20200606_115903_1_0.jpg)
Comments
Garage Storage Shelves
![](/sites/default/files/shelfpin.jpeg)
Kinda new at working with wood but I enjoyed this one and did it in under a day. I also just recently built a complete wooden fence before I did this so building frames was fun.
![](/sites/default/files/shelf1pin.jpeg)
![](/sites/default/files/shelf3pin.jpeg)
![](/sites/default/files/shelf4pin.jpeg)
Bookcase
![](/sites/default/files/3154813167_1343776221.jpeg)
Designed by myself. Used a jigsaw, nail gun, and made miter cuts on the molding for the first time on this project. Glued a curtain panel I bought at target to the back before attaching it.
Overall size is 7 feet tall, 3 feet wide, and 1 foot deep.
![](/sites/default/files/3154813168_1343776221.jpeg)
![](/sites/default/files/3154813169_1343776221.jpeg)
Console table
![](/sites/default/files/A81200B9-6EB2-4C0F-BDFC-B911C4BD66F5.jpeg)
This was our very first project! It went amazing ❤️ I absolutely love it. The plans provided were exactly what I needed and broke down everything for a first timer. Thank you so much Ana!
![](/sites/default/files/60534ED6-51D4-4FC6-BC1D-CB003B0C278E.jpeg)
DIY Wedding Tables and Benches
![](/sites/default/files/diyweddingpin.jpeg)
We made these tables and benches for my daughter’s wedding. They made setup for dinner just what she wanted!
Cindy Prescott
![](/sites/default/files/diywedding1pin.jpeg)
![](/sites/default/files/diywedding2pin.jpeg)
![](/sites/default/files/diywedding3pin.jpeg)
DIY Chaise Lounge Chairs, Single Lounger
![](/sites/default/files/3154813320_1344072650.jpg)
This was my very first project to take on with Ana's plans. My boyfriend and I helped each other, and I think the result is pretty amazing. A lot of people has complimented our project, so we will be building something else soon.
![](/sites/default/files/3154813321_1344072650.jpg)
![](/sites/default/files/3154813322_1344072650.jpg)
![](/sites/default/files/3154813323_1344072650.jpg)
![](/sites/default/files/3154813324_1344072650.jpg)
![](/sites/default/files/3154813325_1344072650.jpg)
Picnic Table Benches
I assembled these two benches over the 2014 Memorial Day weekend.
![](/sites/default/files/3154846126_1401332221.jpg)
Rolling Cart for Home
![](/sites/default/files/1_102.jpg)
Thanks for the plans! My wife and cat love that cart, and I'm not sure who will win )))
This is my first build from Anna's plans.
![](/sites/default/files/13_0.jpg)
Modern Adirondack Chair Set
![](/sites/default/files/20200609_105210.jpg)
I used 5 5/8 fence pickets I had in the scrap box to give the chairs a wider arm rest. I wanted something wide enough to safely hold a paper plate and drinks.
I planned them, routered the edges and put a coat of oil based polyurethane on them.
The table is just something I put together and the top is a 1.5 inch thick 16x16 concrete paver.
If you like the wide arms, use wood glue and clamps, not nails or screws. Saves you from having to fill them and it looks better too.
Enjoy
And thank you Anna for a great build!
Long Barn Door Console
![](/sites/default/files/haystack1.jpeg)
My version of the 8’ Grandy Barn Door Console. I made it deeper to accommodate a sink that we haven’t put in yet. It was so fun building again. I haven’t built a piece of furniture since high school. Thank you for your amazing plans!
Haley's Fancy Farm House Style Bed
I completely made all of my my teen daughters bedroom furniture from plans from Ana-White.com.
Farmhouse Bed
Open File Cabinet with desk top for dressing table
Open File Cabinet for side tables.
![](/sites/default/files/3154813433_1344350287.jpg)
![](/sites/default/files/3154813436_1344350287.jpg)
![](/sites/default/files/3154813437_1344350287.jpg)
Grandy hanging door w/ live edge slab
![](/sites/default/files/IMG_7412.jpg)
My wife and I were originally going to build a different plan from Ana, but she wanted to have hanging barn doors and we found this and said PERFECT! I tweaked the plans a little for the height as it would be too close to tv (where will I put my turntable?! :P ) and started to build. Built it from all pine. The structure wasnt too bad and went together wonderful. Painted it up with an exterior grade paint for durability, but didnt like how easy it would actually marr so I hit with three coats of spray polycrilic from minwax.
Due to time constraints and traveling every weekend, this took us all of a better part of 5 weeks to complete.
Made all the track from McMaster aluminum, some amazon pulleys for wheels, and some shoulder bolts w/ locknuts. This prevents from overtorquing the nuts down and binding the wheels :)
The TOP is my favorite part! I ordered a 13' piece of live edge pine slab w/ bark on from a mill in Ohio shipped to Florida, and had them rip it to my 92.5" length and the width I wanted for the top. Once I received I filled all the cracks/voids/knots with West Systems 2 part epoy, then sanded the entire unit from 80, 120, 220 grit. I used a belt sander to rip off any bark I couldnt pry off. Then some pre-stain, a very quick wiped off coat of Minwax Espresso, and 3 coats of spray on satin polyurethane (only 2 on bottom). Came out BEAUTIFUL!
Bought some TE brand LED light kit (5m) on amazon for $18 shipped and super glued to the shelf. Had to put a 0.50" hole on one side toward the front to pass the light string thru, and used electrical tape to black out the lights running vertical in the corner. They are also programmable and color changing.
Table top is 92.5" long
Unit is 88.5" long
Beautiful piece that people have been raving about.
Thanks Ana for the plans!
![](/sites/default/files/IMG_6422.jpg)
![](/sites/default/files/IMG_7315.jpg)
Comments
Thu, 09/22/2016 - 11:30
also, this table is 92.5"
also, this table is 92.5" wide. Thats a 70" TV and a great dane. Some people have thought its small and didnt realize the tv and dog size lol
Mahogony Chaise Lounge
![](/sites/default/files/3154813596_1344621659.jpg)
took me a week to build, lots of compliments, already making them for family and friends!
![](/sites/default/files/3154813597_1344621659.jpg)
![](/sites/default/files/3154813598_1344621659.jpg)
![](/sites/default/files/3154813602_1344621659.jpg)