Community Brag Posts
Sliding Door Console
![](/sites/default/files/sliding1.jpg)
This cabinet was inspired by an Ana White project. My wife wanted more storage in our new home, and we had a sofa table at this location. But it was just a top, no shelves. I custom fit it to be flush with the window sills at the top and ends so it takes on a bit of a built in appearance. The top and bottom are oak faced plywood, all edges covered with iron on oak facing. As I was short of the expensive plywood, the ends, shelves and kick are doug fir plywood with a light oak stain; while not a perfect match gave a pleasing result that guests have not caught. The doors are 1/2" MDF, with a 2" solid oak end glued on where I routed the slots to open them. Slots are 1/4" +, 3/8" apart, and the top and bottoms of the doors routed to leave a 1/4" rail. The bottoms of the bottom slide slots have a slick poly tape in them, which really helps the doors to slide easily.
Sides and interior are brush finished with 3 coats of semi-gloss polyurethane, while the top has 5 coats. The MDF on the doors has one sprayed coat of white primer (oil based to avoid bringing up the MDF) with a final sprayed coat of mat finish enamel. I need to do one more step, light sand with 320 grit and paste wax the top to get that really fine finish.
While not as easy as Ana makes it look, it turned out pretty well. That hard part on a piece this size is getting all the pieces cut precisely, and I mean with less than 1/32nd difference, to provide a good fit. As it was I had to custom cut the oak opening ends on the doors to account for the small differences in widths at the top and bottom to obtain a nice fit against the sides. Next time I'll triple check all finish dimensions to make those small adjustments in parts before assembly, then triple check again for placement during assembly.
While I'll always see the small "errors", my wife is very pleased with the finished cabinet.
Al King, www.KingTechnologics.com
Farmhouse Toddler Beds
I built this pair of toddler beds for my 2.5 year old twins. I used the original plans for one bed and the modified plans for the other (we have two different size mattresses, it turns out!). Both were a very straight-forward build, thanks to Ana White's plans! I love how they turned out. The kids picked the colors and were thrilled to see their favorite colors on their beds! Can't wait to start my next project!
Comments
Fri, 02/17/2012 - 16:42
I love the way these turned
I love the way these turned out. Thanks for your picture! Im planning to build these for my twin boys :)
Thu, 02/23/2012 - 07:31
Thank you!
Thank you for the kind words! We are very pleased with how they turned out... and extremely surprised at how sturdy they are! I lay with each of the kids at night (just for a few minutes at bedtime) with no problem. Every toddler bed we researched prior to building these had a weight limit of 50lbs! These can hold my 200lb husband with no problem.
Loft bed playhouse
![](/sites/default/files/3154838839_1387801909.jpg)
Followed the plans except for the rounded window and door. I love the cozy look!
Bench with cooler
![](/sites/default/files/FB_IMG_1570540968622_0.jpg)
Started with bench with table but changed by adding a cooler.
![](/sites/default/files/FB_IMG_1570540973046_0.jpg)
Comments
Garden Potting Bench
![](/sites/default/files/potting%20bench%20brown%20pin.jpeg)
Potting bench. I had some pressure treated darker wood around and used that for the legs and frame. Pine for much of the rest. Stained the frame cherry. Polycyclic for the pine and the frame. Three times. Lots of compliments. Highly functional as well!
![](/sites/default/files/potting%20bench%20brown1%20pin.jpeg)
![](/sites/default/files/potting%20bench%20brown2%20pin.jpeg)
$10 ledge and first build with a kreg jig!
![](/sites/default/files/3154805601_1329584938.jpg)
$10 ledge and first build with a kreg jig!
![](/sites/default/files/3154805602_1329584938.jpg)
Comments
Mon, 04/23/2012 - 22:15
ewqff
It is nice that you posted something like this [url= http://www.pandawill.com/usb-car-charger-for-mp3mp4mobile-cell-phone-bl… ] USB Car Charger [/url] and I am quite lucky to read it. Thanks for posting this!
Super Easy Little Adirondack Chair
![](/sites/default/files/3154838927_1388026068.jpg)
To help keep things aligned, in between step 4 and 5 I cut a 15” temporary support and attached it to the back of the stringers, opposite the front apron and then removed when finished attaching chair back. I used Silhouette Cameo vinyl cutter to make the stencils for the name and logo. Home Depot can mix Glidden paint in official campus colors.
Sectional
![](/sites/default/files/20160306_122628.jpg)
Here is the outdoor sectionAL I built with redwood.
Comments
Sun, 08/01/2021 - 18:37
Looks great! How did you…
Looks great! How did you fasten it together? Pocket holes, or another method?
Fancy X Farmhouse table and bench
![](/sites/default/files/table%202_9.jpg)
Used the fancy X farmhouse table plan with slight modifications. I decided to use a 4X4 vs two 2X4 as the main leg for the base. I thought it would provide more strength for my final product. Did the same on the bench. Then i moved the support and brace over and added an additional one to provide extra support for the concrete top and trough i made. All in all the base and the bench came out beautiful and am so over the moon with them both! It was my first project I have done (very ambitious I know) but now I am hooked!
![](/sites/default/files/table%20base.jpg)
![](/sites/default/files/table_32.jpg)
Kitchen Island w/ Corian
I used the plans for Michaela's Kitchen Island, more or less, but scrapped the top. Instead of wood, I went with a piece of Corian that I got very, very cheap at a local recycled building materials store. It was not that much more expensive than using wood, believe it or not. It's also easier to work with than wood, at least for this project. We even had enough left over for 2 large cutting boards.
Comments
Rhyan Console Table
![](/sites/default/files/3154839133_1388262109.jpg)
I loved the plans for the Rhyan Console Table. I made adjustments to fit my media equipment and 60" flat screen (51" W X 18" D). I used select pine and 3/4" White Oak plywood. The finish is Verathane "Ebony' with Varathane Satin Finish. I couldn't be happier with how the project turned out. It matches the finish of my speakers.
![](/sites/default/files/3154839127_1388262109.jpg)
![](/sites/default/files/3154839128_1388262109.jpg)
![](/sites/default/files/3154839129_1388262109.jpg)
![](/sites/default/files/3154839130_1388262109.jpg)
![](/sites/default/files/3154839134_1388262109.jpg)
Farm table kitchen Nook Bench
![](/sites/default/files/image_315.jpeg)
Inspired by one of your older farmhouse tables, then my wife found a pottery barn type farmhouse, few tweaks later I ended with this. Then decided we needed a bench for the kids so built in a corner bench and then made the cushions. Lots of good meals to come. Email me at [email protected] if any questions.
Bed and night stands from plans on this site
![](/sites/default/files/20191020_204530_0.jpg)
Bed and night stands build with plans from Ana White. Both projects were finished using age accelerator and weathered gray stain. Time and coat estimations include both night stands and the full sized bed.
Potting Bench
![](/sites/default/files/purple1.jpeg)
Your potting table is/was a hit and is used weekly with great love.
Darren S.
Recycled Pallet wood coffee table.
My wife wanted to change up the living room a little bit. Being in the military we move around a lot and our furniture seems to never fit in the next house we move into. So I decided to build a little smaller coffee table and end table. Cool part is if you look on craigslist, people are always giving away pallets for free on there. I took Anna's Bristol Outdoor Side Table design and extended it and added longer legs. Hopefully you all like.
![](/sites/default/files/3154805920_1330283545.jpg)
![](/sites/default/files/3154805921_1330283545.jpg)
![](/sites/default/files/3154805922_1330283545.jpg)
Comments
Mon, 03/05/2012 - 05:48
Had the same idea with some
Had the same idea with some fenceposts we tore down. built it 3:5 ratio width:length and trying to paint a decent looking Texas flag on it.
God bless and stay safe!
Playhouse Loft Bed
We built this kids playhouse for our 4 year old daughter for Christmas. We modified it from the playhouse loft bed with stairs, only we made it bigger and instead of stairs we installed a slide. Also rather than a ladder we put in a rock wall.
Farmhouse X Table
![](/sites/default/files/12080269_713220672148026_6624831467023542294_o_3.jpg)
Pine wood with 2 coats of Minwax Mahogony Gel-Stain and 2 coats Minwax Semi-Gloss Polyurethane.
![](/sites/default/files/10399455_613061958846030_38582271052844653_n_0.jpg)
![](/sites/default/files/12715579_613062048846021_3709087927658254618_n.jpg)
12ft farmhouse bench
![](/sites/default/files/9D0CB5BF-4C54-4725-90B5-1C0BBDDC3667.jpeg)
I was asked to surprise someone with a 12 ft. bench. After searching and searching I found a plan I really liked, but I felt it just wasn’t enough. I modified the plans to give it a little more of a farmhouse look. I also had to double the size of the original plans.
![](/sites/default/files/C4F21B7F-92C0-4013-85E9-96AA6E79F892.jpeg)
![](/sites/default/files/73F1D0AA-FA90-4756-A66E-AF372F8B2A2B.jpeg)
![](/sites/default/files/BE308FAF-EA8F-4B93-9755-296CBB4CFFA6.jpeg)
Finished Building a Farmhouse Bed with 6 drawers for the Wife
Thanks Anna for providing this website to help us save money and build furniture such as this farm bed. This only took two days and my wife loves it.
Thanks
Mike