Wood Patio Chair with Deep Seat Cushions
![](/sites/default/files/back%20chairpin.jpeg)
Loved building these chairs they were really easy and look amazing, couldn't be happier.
Loved building these chairs they were really easy and look amazing, couldn't be happier.
I can't believe I built this bed! It's the project I'm most proud of so far and my daughter loves "my big girl bed!" I recently got a jigsaw and tried it out making the arch. It didn't turn out perfect but I'm probably the only one who notices it. I built the rails using 1x2's from the "Traditional Wood Toddler Bed" plans on this site and altered them to fit this design. I added a third rail to it because there was too much space between the mattress and rail when my daughter lies on the bed.
I found a bunch of free wood on Freecycle from someone local so I didn't have to spend a ton of money on this.
Thanks for the plans, Ana!!!
Wed, 10/17/2012 - 09:53
I love the arch...looks perfect to me! Your little princess looks so proud of her new bed. Love it!
I copied the boat wood painting technique using the colors of my daughters room and it turned out wonderful. It really is as easy as it looks on the tutorial! You can see more of my stuff on anexceptionalife.com
Hello! Sloped ceilings won't allow bunk beds at our house. Decided to go with these beds for the built in toy-box feature. The hinges were a bit tricky. I added magnets to the doors. All in all, I am pleased!
Wood bench with x back detail.
After I built my table (the farmhouse/tryde), my sister wanted a table for her new home. She had looked online and found a table that someone had refurbished from an old table, and put a new top on it..
So once she described it to me, I got started. I again used 2x4s glued/screwed together for the legs. Then I got 2x8 and start putting them down. Since these are such big boards, you have to be extremely careful not to get ones that aren't straight. If they are warped, they will make your table wobbly once you screw them down. After I finally got past that, I began staining.
For the distressed-ish look, I used Rustoleum's water-based Kona stain. I stained each board and then use a wire brush to "scruff" the boards up a bit. From there, I sanded the tops with a combination of 60 grit and 220 grit. I used Rustoleum's matte-finish poly to give it a very soft feel and look.
This table compares best with the farmhouse.
Mon, 10/15/2012 - 14:48
I'm sure you can build it to come apart. This particular one, no. I made another where the top will come off as a one solid piece, but this top is screwed in each individual piece.
Now you could unscrew everything and screw it all back together, but then you would have to make touchups to the paint and stuff. I use white caulk to fill the seams from the base of the table to the table top, and to the legs to the base.
This is The Traditional Wood Toddler Bed. Built straight from the plans. Worked out great and my daughter loved it!
Made a miniature rustix x end table. You can find the video of me making it here: https://www.youtube.com/watch?v=GPL-mh5rWJ4
First build to sell. Has a few faults of my own doing. But, sold it in 24hrs. 😁
I needed a media console for my tv and this was perfect. The only thing I changed was to put a shelf instead of drawers so I can put cable box and DVD player. My wife liked it so much I had to make another one for her.
I followed the basic outline in the original plan for the main part of the project. I did secure more with some 2x4 I had. I had plenty of 2x4 laying around and felt this would be a good time to use some of it. I shorted the arms a bit. I think mine are 23 1/2in on each side. Still plenty long enough for most projects. I added a small shelf in the middle. I am not thrilled with exactly where I have it. But I have it just floating on the rail so If I want/need to take the shelf out , it is just real easy to do so. I would say just because I was being extra carful with the cuts that it took me about 6 hours in total to complete it.
With a few modification in mind, I set out to build an outdoor table using cedar wood with the ability to remove the legs and move it indoors. With a few simple modification to the original plan, I was able to come up with this cool table for a ground level deck. I went with a B and better grade for the table tops because I wanted a clean and modern feel but brought in a little rustic element with the knotty 4x4 legs (also cheaper :)).
Tips @ charitybuils
i have aqesome neighbors that just built a deck but was missing something. She like the pallet look bars but did not have any pallets. I did have a bunch of 1 x so made my own pallets.
From scrap pile to a fun picnic table. Thanks Ana for the plans.
Love this bookshelf. I do think it just a bit tall.
Thanks so much to Ana and Shanty2Chic for the plans! I modified the design to exclude the arches - my hands are too weak to make the cuts, but I replaced them with black strapping that matches other features in the house. I also extended the table to 12 feet long in order to perfectly fit the windows overlooking the lake. I absolutely love it and will definitely be making more things for our new home. Thanks again!!!
Our spare bedroom was in need of some furniture and when I saw this plan for the rustic "x" console table, it was a perfect fit. And as mentioned in the blog, this was perfect for displaying the handmade quilts our grandmother made for us. When I first read the plans, and the materials list, my husband wasn't too sure about furniture made out of 2x4's and 2x6's but when all said and done, the table came out beautifully and we are both enjoying it. Thank you so much for the wonderful plans!
Mon, 10/22/2012 - 06:37
Thank you! And yes, this is a bulky piece. I didn't really realize how bulky until it was going together. But at that point, I knew I'd find some place for it :) Luckily we had a pretty large room that was mostly empty so I think the scale of the table fit the room size.
Mon, 10/22/2012 - 12:09
I noticed you did the x's slightly different than the plans, as they have two cuts on both ends and attach perfectly. any advice on doing this?
Mon, 10/22/2012 - 18:00
For me, the x’s were the most challenging part of the project. I scratched my head and stared at the table side for a while thinking of how to make the x’s so they would meet the center of the table corner. Here’s what I came up with. Figure out your angle. There are a few ways to do this. You can do this by using an online angle calculator where you enter the height and width of your opening and it will give you the angle, you could use a protractor and hold it up to the corner to figure out the angle, or make a template out of paper and transfer that onto your wood. I will admit, I think figuring out the angle is the toughest part, at least for me. Once you have your angle, cut both ends of your wood parallel to one another at that angle. Then measure and mark the center point of your cut. The next cut is through the center point and 90 degrees off of your existing cut . I find it easiest to lay my carpenter square on my cut side then draw a line 90 degrees through the center point mark. A few things I learned along the way, the more square you can get your corners the easier it will be to cut and fit your x’s and make some practice cuts with some cheap 2x2’s then transfer your measurements over to your final 2x2’s. Hope this helps. Happy woodcrafting!
Fri, 07/26/2013 - 09:11
Were you able to find black L brackets or did you have to paint them? I'm trying everywhere to find them and I've had no luck! Any help you can give me of where to look for them would be great. Thank you so much and what a beautiful job!
X Bookshelf. Followed Ana's great plan, only change was to spare 1x4s that I planked for shelves. Finished with antique white milk paint. Very happy with result.
Wife wanted an entry table for when you walked in the house. Loved the plans we saw from the site, so just modified slightly and here it is.