Community Brag Posts

Garage Shelving

Submitted by Anonymous (not verified) on Sat, 07/16/2016 - 17:17

I am a beginner diy'er and this was one of my first projects.  Also it was my first time using the Kreg jig and I loved it!  My shelving system was around 8 feet tall, 12 feet wide and 30 inches deep.  I added some extra cleats to support my deeper shelves (30") and also used thicker (5/8") plywood.  This was a fun and easy project to do!  Thanks so much!

Estimated Cost
$150
Estimated Time Investment
Day Project (6-9 Hours)
Finish Used
none
Recommended Skill Level
Beginner

i did it!!

Submitted by sueslager on Tue, 07/03/2012 - 12:22

Amazing what some basic lumber can make! Read the comments included with the instructions ... the 1 x 4 cut list was especially helpful. All told it was under $30 for a very comfortable sturdy Adi !! Some modifications I did for mine ... I used pocket screws to attach the seat slats and arm rests ... no splinters :) I found it easier to attache the middle back support loosely to the arm supports, then attach to the back slats in the correct position Paint was Clark & Kensington All-In-One from Ace in Fairfield Manor -- it's a beautiful watery green ... perfect!! Thanks Again Ana!!

Built from Plan(s)
Estimated Cost
$30
Estimated Time Investment
Day Project (6-9 Hours)
Finish Used
exterior satin paint
Recommended Skill Level
Intermediate
Seasonal And Holiday

Modern Geo Twin Platform Bed and Headboard

Submitted by Anonymous (not verified) on Sat, 05/16/2020 - 17:44

This was a fun build. I let my daughter design the slats on the headboard, and as long as all slats are either 90 or 45 degrees, the cuts and application are simple. Thanks, Ana!

Estimated Cost
$100
Estimated Time Investment
Day Project (6-9 Hours)
Finish Used
Miniwax Pecan
Recommended Skill Level
Beginner

Comments

Farmhouse Small End Table

Submitted by mpjacob08 on Mon, 05/25/2020 - 09:33

My 2nd ever build! Made to match farmhouse beginner coffee table. This is the smaller size posted. So Easy! Thank you for the plan and for the videos. I love them and am learning so much!

Built from Plan(s)
Estimated Time Investment
Afternoon Project (3-6 Hours)
Finish Used
Varathane golden oak stain, spray shellac, Varathane water based polyurethane
Recommended Skill Level
Beginner

Farm Table Sewing Base

Submitted by fallon on Wed, 07/25/2012 - 18:52

We just slightly modified the plan to accommodate our really great industrial sewing table base.

Estimated Time Investment
Afternoon Project (3-6 Hours)
Finish Used
First coat - Glidden Natural Linen
Stain - MinWax Classic Gray 270 (one person brushes while the other wipes it right off)
A little sanding for some aging
Several Coats of MinWax - Polycrylic, satin finish (sand between each coat)
Recommended Skill Level
Beginner

Comments

Modern Adirondack Chair

Submitted by dijonaise on Fri, 06/19/2020 - 05:49

My little quarantine project all started with a three foot circle in the back corner of my yard and turned into this. After finishing the structure, we were looking at different furniture and considered either going on the cheap ($20 plastic chairs) or the expensive route ($1200) for this same setup. That was when I came across your site Ana. Your amazing plans and community's brag posts gave me the confidence to give it a go and we could not be happier with the result.

The chairs and tables went together super easy as everyone had mentioned. I sanded everything before cutting and then just sanded the cut ends. I did not have the stain on hand (not did we know the color) so we waited until after assembly to stain, which ended up not being too bad, just a lot of little nooks and crannies to get into. I used a small foam pad to get in between the boards.

Overall, I would say that the build, from start (rough lumber) to finish (sanded and assembled) took me about 2-3 hours per chair, and about the same to do two coats of stain on top and one on the underside, bringing the total time per chair to about 5 hours.

Now on to the landscaping... ;) I am also planning to build some planters to hold posts to hold some string lights around the perimeter. Boy how these little projects have a domino effect...but in the end, there is nothing better than sitting back and enjoying the fruits of your labor.

Estimated Cost
$40/ chair and $10/table. Total Project (including fasteners and stain): ~$300
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
SW6965 - Hyper Blue Solid Deck Stain
Recommended Skill Level
Beginner

Octagon Table Finished!

Submitted by kkwong5 on Mon, 06/09/2014 - 08:47

Finished building this table with the plan provided by Ana White! Worked out great. I stained it in a with a transparent deck stain in natural sequoia. Happy to help if anyone has any questions!

Tips: Definitely cut as you go. If you get the angles are off in the center when all the long pieces connect is it makes each top piece larger or smaller.

Built from Plan(s)
Estimated Cost
200
Estimated Time Investment
Week Long Project (20 Hours or More)
Recommended Skill Level
Intermediate

Comments

Red Fancy Hall Tree

Submitted by keason5 on Tue, 08/28/2012 - 09:14

This was my first wood working project in a very long time. I was a little nervous about doing it because it would be on display in the main entry way of our house and I didnt want to make any mistakes. It took a little longer than I had hoped, but I think going slower helped make it perfect.

Built from Plan(s)
Estimated Cost
$200
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
painted red then roughed up the edges with sandpaper for a vintage look. then applied a brown glaze to antique it.
Recommended Skill Level
Beginner

Comments

DIY Greenhouse with Reclaimed Material

Submitted by Anonymous (not verified) on Fri, 05/03/2024 - 08:00

My wife & I did this in two weekends, we're not that handy but your plans were easy to follow. Mostly reclaimed material. So fun & we love it!
Thanks!!

Tammie & Scott

Built from Plan(s)

Simple Patio Chair

Submitted by keltik on Tue, 07/08/2014 - 11:04

This was my first project from Ana's site. I wanted something simple and cheap to make, so all in all, this project was very simple.
I think I will paint instead of stain next time though as the quality of the wood I purchased from Home Depot wasn't the best.
Very happy with it though, and I'm planning on making more.

Built from Plan(s)
Estimated Cost
50
Estimated Time Investment
Afternoon Project (3-6 Hours)
Finish Used
Behr Weatherproofing Wood Stain - Russet Brown
Recommended Skill Level
Starter Project

2x4 Outdoor Sofa

Followed the plan exactly. Added an extra 6 foot board across the back for better pillow support. Got the 24" cushions from the big box store. With one extra 8 foot board + left overs, I have enough to make a modified, small 34"x17" coffee table from the 2x4 plans linked below, which is perfect for the space I need. Will add a photo for that when I'm done.

Estimated Cost
100 for the sofa
Estimated Time Investment
Afternoon Project (3-6 Hours)
Finish Used
none yet, may paint it.
Recommended Skill Level
Starter Project

Nesting Office Station

Submitted by Sb1212 on Tue, 07/14/2020 - 18:38

So loving this nesting office station❤️! We will have a sofa sleeper in the office as well. So we needed a desk that could be moved to the wall when the sofa sleeper is being used by guest. I saw a post from Ana for her Nesting Grill Station and I came up with the idea to make this nesting office station. The cabinet includes a file folder drawer (which is from Ana's mail boss plans), a regular drawer, cabinet doors with shelves. One of the shelves is a pull out shelf for the printer. I think it came together great! Design for nesting desk inspired by these plans: https://www.ana-white.com/woodworking-projects/nesting-grill-station https://www.ana-white.com/woodworking-projects/mail-boss

Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
Minwax Golden Pecan
Valspar Signature Ultra White in satin
Recommended Skill Level
Intermediate

Comments

Sb1212

Sat, 10/03/2020 - 08:35

Hi, Thank you! Actually I didn't add wheels to the design since this will be in an office with thick carpeting. I added adjustable metal foot pads to the bottom of the desk.

Rustic x garage tree.

Submitted by johnpkuly on Sat, 07/18/2020 - 08:49

Fun project. Had the kids helping with the build. Easy to follow directions. Made the x side by side rather than cut. Sanding and painting took the longest. Had to put 2 good coats to protect it. Thanks!

Built from Plan(s)
Estimated Cost
$200
Estimated Time Investment
Day Project (6-9 Hours)
Finish Used
Vale par signature urban sunrise semi gloss
Recommended Skill Level
Beginner

Hunter's Table

This is agreat project to cut your teeth on. Even though this was very roughly put together, the end reult was still furniture-worthy.

Built from Plan(s)
Estimated Cost
$20
Estimated Time Investment
Afternoon Project (3-6 Hours)
Finish Used
MINWAX Golden Oak Wood Finish
Hunter Green Topside Spray Paint
Recommended Skill Level
Beginner

modern farmhouse bed frame with matching end tables

Submitted by Anonymous (not verified) on Thu, 07/30/2020 - 10:13

Bed frame - Husband and I built and assembled over a weekend. We love it!
Only variation from the plans were that we used 1x8 shiplap boards for the headboard (because the options were nicer at Home Depot).

Nightstand 1 - This I built myself, it took about 5 hours.
Followed the directions and the drawer worked the first time!

Nightstand 2 - This I also built myself, took about 4 hours.
This one I had about 17" to work with. The only measurement that changed was the front and back cut to 10".

Estimated Cost
Not sure about the bed frame. We purchased some tools for this project.
about $70 per nightstand
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
Minwax Wood Finish
Semi-transparent
Ipswich Pine - 221
Recommended Skill Level
Beginner

Comments

okstout4

Mon, 10/19/2020 - 19:42

Very nice! I'll have to look into this color as Im loving it!

Wide Cabin Dresser

Submitted by jmsmith12 on Thu, 10/18/2012 - 13:37

Modified wide cabin dresser with metal full extension drawer slides on the bottom of the drawers. The extra set of drawers on the bottom were added to give more space for storage.

Estimated Cost
200-250
Estimated Time Investment
Week Long Project (20 Hours or More)
Finish Used
Any advice for a finish with a linen covered bed?
Recommended Skill Level
Intermediate

Comments

mebohn

Thu, 01/31/2013 - 14:04

Beautiful! I was wondering if it would look pretty with the extra drawers on the bottom. I'm building this plan for my son right now, but I might build another with extra drawers for myself!

dbwalk

Sun, 11/23/2014 - 05:29

Your build looks awesome!  I'm going to be doing this for my twin daughters room very soon.  I was just wondering how you modified the dimensions on the left and right sides.  What were the measurements and dimensions of all the pieces since it had to cover all the way to the bottom?

 

Papu5477

Thu, 01/25/2018 - 18:29

Are plans available for this build? I love the extra drawers. 

Shiplap Fireplace Mantle with Storage

Submitted by Anonymous (not verified) on Sun, 07/28/2024 - 13:45

During a complete basement renovation, we combined the Shiplap Fireplace plans as well as the Flip Open Mantle plans to create this beautiful TV & Fireplace Wall with bench and open front for peripherals. We modified plans to make the TV more "built-in" allowing us to hide cords and cables better, plus just give it a sleeker feel.

We customized the front to be open so that we had a place for peripherals and some air flow. This included shelving in the outside front compartments. We were able to accommodate a PS5, games & controllers, record player, records, and a receiver/amplifier. A slim soundbar for the TV sits on top of the custom mantle. The bench gives it a nice touch and dimension.

Adam Wiebe

Seasonal And Holiday

Playhouse Loft Bed

This was a great plan to follow. I made a few modifications such as adding a back wall that I painted with chalk paint so my daughter can draw to her hearts content. I also added a bit above the door so we can post messages such as her name or "girls only". I decided to skip the stairs being storage thinking it would simply be a junk collector and added a small step at the top as she found it a bit too high to get into her bed. Finally the painting took sometime as I used cabinet quality paint for durability but it's a bit tricky to work with. As a final touch I installed LEDs from Costco on the interior ceiling and back top rail all controlled by a remote with over 20 colors to choose from and adjusting brightness. Can't wait for my next project.

Built from Plan(s)
Estimated Time Investment
Week Long Project (20 Hours or More)
Finish Used
Cabinet and melamine paint. More durable and will stand up to kids.
Recommended Skill Level
Intermediate

Pallet Shelf Spice Rack

Submitted by rjh2006 on Thu, 11/01/2012 - 17:33

My mother lives with me and we loved the Pallet Shelf Project and made a back door shelf/coat rack. Then, task maker that she is, she decided we need a spice rack in the kitchen, and viola. Still needs another coat of minwax, but should be ready to hang tomorrow! Thanks Ana!

Finish Used
Minwax
Recommended Skill Level
Beginner
Back