Community Brag Posts

Shoe Dresser with Extras!

Submitted by Anonymous (not verified) on Sun, 04/24/2022 - 11:30

We added a bit to your shoe dresser plan. We ended up building into the wall since it had the perfect little indent and put a baby cabinet in the middle so we had access to the outlet. 

by Angela

Built from Plan(s)

Twin Farmhouse Bed

Submitted by kelli224 on Wed, 06/29/2011 - 18:56

One of our first projects was the Farmhouse twin bed for our son. We couldn't love that bed anymore than we do. It is gorgeous and while it was a learning process, it was still much easier than we ever thought possible.

Built from Plan(s)
Estimated Cost
under $150
Estimated Time Investment
Week Long Project (20 Hours or More)
Finish Used
It was sanded many times, primed and then painted with flat Sherwin Williams "Commodore". We don't really like the glossy look and after a few months, it still looks just as it did the day we finished. Because there's no poly, it will be easy to touch-up when after our two young boys bang their toys into it!
Recommended Skill Level
Beginner

Comments

debandtom25

Sat, 07/09/2011 - 08:36

Your bed has inspired me to build one for my son. LOVE the color too! I'm going to add a trundle so he can have friends stay over. I'll post when I've got it finished.

Justjanet

Tue, 11/10/2015 - 06:43

this was the best post showing how you attached the rails. there are so many questions about it and yours looks so sturdy. thanks for the picture.  gorgeous color for the bed as well!

Fancy X Desk

Submitted by Scianna8 on Tue, 08/06/2013 - 14:01

Beautiful desk! Thank you for the free plans.

Estimated Time Investment
Weekend Project (10-20 Hours)
Recommended Skill Level
Beginner

Twin over Full with Trundle, storage stairs

This project took a week to build.  Working during my boys' nap time and late nights, I was able to complete everything in about 7 days.  I used cedar, and sealed with Cabots Bleaching Oil.  The cost of wood for the beds and stairs and drawers came to about $700.  The extra cost came from the additional side rails on the top bunk and the stairs and drawers.  Still comes in about $500 less than if bought commercially.  The famiy loves the bed and as my kids are 2 and 3, I expect to get many years out of the bunk bed.  Side note:  I had to add quite a few brackets and angle joists to secure and minimize wobble due to the additional weight of the top bunk.  (2 2x4s from the 4x4 to the side of the cleat and side rail of the bottom bunk, on the back side only, made a world of difference)

Estimated Cost
$700
Estimated Time Investment
Week Long Project (20 Hours or More)
Finish Used
Cabots Bleaching Oil
Recommended Skill Level
Intermediate

Comments

Ms.Bungalungalow

Mon, 12/11/2017 - 14:28

Hey there, I absolutely love your bed. The $700 scares me a little but i will not be using cedar. I will be doing everything else just like you. Thanks for sharing.

 

Queen storage bed

Submitted by willowpond on Thu, 04/26/2018 - 20:39

I started with the queen storage bed plans and modified them to fit my needs. Two drawers on each side, one at the foot, all the same dimensions. I left open bins at the head of the bed because there wouldn’t be room to open drawers. They can be used for books or electronics, whatever my son wants to keep close. I mounted a power strip with USB ports inside the open bins (out of sight) so he can charge his electronics.

 

I used birch plywood for the benches, pine for the drawers. I painted the drawer boxes navy blue, matching one wall in the bedroom, and used edge glued birch panels finished with clear water based semi gloss poly for the drawer faces. 

 

This is is definitely my most difficult project so far, and the one I love the most. 

Built from Plan(s)
Estimated Cost
$200 - birch plywood, edge glued birch panels, pine for the drawers, drawer slides, drawer knobs, assorted hardware, latex paint, poly finish.
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
Clear poly semi gloss - three coats, light sanding in between
Navy blue latex semi gloss on the drawer boxes
Recommended Skill Level
Intermediate

Comments

Fancy X Desk - Altered

I love the fancy X desk plans but made some adjustments to suit my tastes better.

I used 4x4s instead of the 2x4's for the legs and 2x6's instead of 2x12's for the top. Once I have everything built, I hand planed the desktop to even out the 2x6's and make it feel less like standard hardware store lumber and more like an old handmade farm table. I love all the slight surface imperfections that the hand plane left behind.

As always, building it doesn't take long, but finishing it does. I only had about 6 hours invested in the build, but doing the many layers of stain, paint, shellac, and poly took several more days to complete.

for the base of the desk, I started by staining it with a vinegar and steel wool concoction. After letting it dry I lightly sanded off the chalky surface, leaving the aged looking wood. I then used white primer and a rag to give it a white washed look. After the white washing was dry, I used fine steel wool rubbing the surface to reveal some of the faux aged wood below. CAUTION: If you plan on using water based stains, paints or sealers, you may want to avoid using steel wool to avoid rust spots.

For the desktop I alternated coats of Morish Teak and Rosewood from ZAR until I was happy with the color. I had some troublesome knots that kept leaking sap so I sealed them with de-waxed shellac. before sealing everything with polyurethane.

I'm really happy with my new desk. Thanks for the inspiration!

Built from Plan(s)
Estimated Cost
$70 for lumber, $5 for screws, $10 for shellac, already had the rest of the supplies :)
Estimated Time Investment
Week Long Project (20 Hours or More)
Finish Used
BASE = Faux weathered wood (steel wool dissolved in vinegar), white primer white wash, steel wool rub, Satin finish polyurethane

TOP = Morish Teak and Rosewood stains from ZAR, SealCoat Shellac from Zinsser, Satin finish polyurethane
Recommended Skill Level
Beginner

Night stand

Submitted by jmiracle on Tue, 09/01/2015 - 07:35

Built two of these to go with the mantel headboard. we used 3 different pieces of molding that are in the same sequence as the headboard. To save money I made the angled feet rather than using the pre fab bun feet. We used a piece of lexan to put on the top to protect against water. When we attached the top trim we made sure it was level with the lexan I made the crate to fit so that we had some type of storage. The color of the crates match the center of the headboard

Built from Plan(s)
Estimated Time Investment
Day Project (6-9 Hours)
Finish Used
Used a paint sprayer to get a nice even white finish.
Recommended Skill Level
Beginner

My Awesome Corner Cabinet

Submitted by mcbrasi on Mon, 05/28/2018 - 19:35

I really needed more Pantry space in my small kitchen. Found these plans on the site and set out to make it. Needed a little splash of color to add to my otherwise earth-tone color scheme. Love it!

Built from Plan(s)
Estimated Cost
$250
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
Dark walnut for the main box. Various different poly-wood stains for the doors.
Recommended Skill Level
Beginner

Comments

mcbrasi

Mon, 05/28/2018 - 19:47

I needed more pantry space in my small kitchen.  Found these plans on the site and set out to make it.  Needed a little splash of color to add to my otherwise earth-tone coleor scheme.  

 

Love it!

Outdoor sectional

Submitted by Anonymous (not verified) on Wed, 04/27/2022 - 08:50

Revamping the backyard with your awesome sectional plans!

Comments

Designer Toddler Beds

Submitted by Silveera on Thu, 07/07/2011 - 03:07

With the third baby set to arrive in several months, I needed to take back the crib from my youngest and consolidate the girls living space. After scouring the Anna White site and looking dreamily at plans and general building instructions for several months, these beds are what I came up with. A combination of the Lydia and Farmhouse beds, I made alterations for the wood I had on hand and the final product I envisioned- complete with decorative trim and even wallpaper! My girls love them!

Estimated Cost
$30
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
Kilz Primer, Behr Ultra White Semi Gloss, Poly
Recommended Skill Level
Intermediate

Comments

Debra Davis (not verified)

Tue, 07/17/2012 - 14:18

Did you make the vanity as well?

Kitchen Ledge Shelves

I built ledge shelves for our kitchen using reclaimed wood I painted teal, then silver, then flat black (Napoleon).

Love having them. :)

Built from Plan(s)
Estimated Cost
$5.40
Estimated Time Investment
Afternoon Project (3-6 Hours)
Finish Used
Teal semi-gloss latex undercoat, silver spray paint, matte black (Napoleon) latex paint top coat.

I wasn't sure what color I wanted. I didn't seal the shelves, just in case I changed my mind again, but I love how knicking it brings out the teal or the silver under the black!
Recommended Skill Level
Starter Project

Comments

JoanneS

Sat, 08/10/2013 - 19:19

Great looking shelves, and it's neat how you got these in the corner shape. It adds so much storage! The color looks perfect with the tile and counter. Love the little flecks of the other colors peeking through too! Great job!

In reply to by JoanneS

yurra-bazain

Sun, 08/11/2013 - 10:15

These ledge shelves really are my favorite shelves right now. I plan to add a few more to my daughter's room, but I'll wait to make those until after I build her dresser. :)

babysteps

Tue, 01/14/2014 - 11:42

I love your adaptation of the original design. I have been looking for an example of someone who made this plan into a wider shelf. Has it held up well? I was worried about the stress on the joints when you make it deeper. Has yours handled the weight? How wide is the bottom piece?

In reply to by babysteps

yurra-bazain

Mon, 04/21/2014 - 11:14

I've had the shelves up for about a year now and it's still in the same spot. The corner shelves are the most sturdy, most likely because it is supported by screws in two perpendicular walls. Its filled with mason jars (re-used, cleaned pickle jars) of pantry items, and there is no visible stress on the joints that I can see.

The smaller shelf is not as sturdy because I could not locate a stud (that didn't have electrical wiring close to it). I used wall anchors and it sags ever so slightly forward (about a millimeter). We only keep our drinkware on it, however.

The base of the shelf is made from a 1x8 (7-1/4" wide). The full width of the shelf with the 1x4 back and 1x2 front lip is about 8-3/4" wide.

I hope this comment reaches you and that it helpful!

Hall tree from old doors

Submitted by E. Goode on Sat, 09/05/2015 - 18:27

Complete a long waited honey do.

Estimated Time Investment
Week Long Project (20 Hours or More)
Finish Used
Valspar Toasted Pecan
Recommended Skill Level
Beginner

DIY Rustic Industrial Bar Cart

Hi friends!
 

Jen Woodhouse here from the House of Wood. 

Today I'm sharing with you the building details for this beautiful Rustic Industrial Bar Cart.

This DIY bar cart has a lot of neat features: a bottom shelf tall enough to hold full size wine bottles and decanters, a hanging stemware rack, and a removable serving tray on top! What more could you need? 

Be sure to tag me @jenwoodhouse if you share photos of your build on social media. I'd love to see it!

You can get all the details for this build on my website www.jenwoodhouse.com.

Estimated Cost
$50-$100
Estimated Time Investment
Afternoon Project (3-6 Hours)
Recommended Skill Level
Intermediate

Grace's Bookshelves (Just One)

Submitted by aclayton on Sat, 07/09/2011 - 12:43

I just made one of the shelves instead of two like the plan calls for. It's painted a dark brown to match the bunk bed that I previously made for my girls. Mine was a little more expensive because I used 1x12's instead of plywood.

Built from Plan(s)
Estimated Cost
$50
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
1 Coat of Primer
2 Coats of Valspar "Barista"
1 Coat of Poly
Recommended Skill Level
Beginner

Comments

Debbie (not verified)

Mon, 07/11/2011 - 19:14

You did a beautiful job! Where did you get your pretty pink storage bins? I've been looking for some like them for my granddaughter's room.

King Farm House Bed

My husband designed this after the farm house bed. I wanted panels on the head board and foot board to "dress it up a bit" and storage drawers. He did a wonderful job. I don't think I have ever had a more prized piece of furniture. Now to find some tall night stands.

Estimated Time Investment
Week Long Project (20 Hours or More)
Finish Used
Off white oil based semi gloss paint
Recommended Skill Level
Intermediate

Comments

vanash2012

Wed, 09/23/2015 - 11:54

Any chance you or your husband would share the adjusted plans to include the storage under mattress?

Thank you so much! love your site and your work!

vanessalust

Thu, 01/21/2016 - 21:52

Hi Ana! 

I was wondering if you had the plans available for this bed with the drawers underneath and the head and foot board ? 

 

:) thank you!

vanessa

nateleejohnson

Fri, 02/10/2017 - 05:27

What a beautiful bed.  Like others I was looking for the plans for the headboard and drawers.  Are they available?

Thanks,

 

Nate

danthony313

Sun, 12/17/2017 - 16:03

the wife loves this design but are there plans for the whole thing yet?

Tacoma9596

Wed, 09/25/2019 - 10:40

Ana,

   Can you provide plans with pics for this bed?   My wife wants it and I got tasked with doing it.

Stove Top Cover

Stove Top Cover for more counterspace. 

Estimated Cost
$30
Estimated Time Investment
Afternoon Project (3-6 Hours)
Finish Used
Dark Walnut Stain
Recommended Skill Level
Starter Project

Comments

Ultamate Roll Away Workbench

Submitted by Anonymous (not verified) on Fri, 05/13/2022 - 15:54

Adjusted the shelves slightly. Love the roll away portion.

Comments

Ana White Admin

Sun, 05/15/2022 - 11:55

This is gorgeous, thank you for sharing! Just shared on our facebook page, we'd love to give credit if you'd like to respond with your name:)

My first crack at it! Hyde console:)

First project for actual furniture ever. This stuff is better than a good book that you can't put down. I am so addicted!

Estimated Cost
100-125
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
Polyurithane black matte after wood conditioner just in case. I put the first coat on heavy with a brush let it dry for 6 hrs+ then distressed with a combo or 120 sand paper and 000 steal wool and then rubbed on a thin coat to seal it all up with an old t-shirt.
Recommended Skill Level
Starter Project

My Daughters Loft Bed and Room

Submitted by haddixml on Wed, 08/14/2013 - 19:52

This was a family summer project. I built the bed and furniture...my wife and daughter did all the painting and picked out the accent pieces!

Estimated Time Investment
Week Long Project (20 Hours or More)
Finish Used
Satin Behr Paint
Recommended Skill Level
Intermediate

Comments

spiceylg

Fri, 08/16/2013 - 05:30

Nice build! Love all of the colors and such. What a fun room!

Cabin Bunk Bed for Dima

My wife, grandchildren, and I have spent the last 8 months building 2 bunk beds from the site.  First we build this cabin version for my grandsons and then we built the sweet pea version for my granddaughters. I thank Ana White for using this website to enable amateur wood workers like myself a tool that enabled us to create a great piece of furniture that they use every day and collect childhood memories and know how much they are loved.  Thank you Ana White.

Estimated Time Investment
Week Long Project (20 Hours or More)
Finish Used
Sanded and stained.
Recommended Skill Level
Intermediate

Comments