Farmhouse Toddler Bed
![](/sites/default/files/C2D48E15-0CF3-4215-A96C-1EFE6C35DA8B.jpeg)
Fun easy toddler bed for my son! Love how it turned out! Stained with an American Walnut stain.
Fun easy toddler bed for my son! Love how it turned out! Stained with an American Walnut stain.
Wood bench with x back detail.
I decided to make the camp loft bed into a bunk bed for the kids. The room is really small so I had to make it toddler length (about 62") and the stairs are only about 13.5" wide. It turned out great and the kids love it!
This bed was picked out by my daughter. Built straight from the plans and she loves it. Now if I can get her to pick a color.
As a beginner this was a pretty fun and easy project. I did use wood screws to hold the edges together since the fence boards are typically curved and brad nails didn’t seem to hold on my first try. Ultimately I really enjoyed the results!
I was in love with the West Elm slat collection but knew I could never afford it let alone live in a spot that would have the outdoor space for it. Luckily as fate would have it, I stumbled across the perfect townhouse with a huge rooftop patio in downtown Vancouver last year right at the same time I discovered Ana White - with no experience in this kind of project, but a love for DIY and alot of determination I'm proud to say I finally finished my dream patio set, and it looks even better than I could have imagined! Thanks Ana :)
One day I was considering buying a wine cabinet for a friend. However, once I did a little bit of research, I found that the cabinets that were reasonably priced, were made of low grade material. That is when I took to the internet and immediately searched Ana's site. I have been on the site in the past and hadn't made anything yet. Once, I found the plan on here to make it, I grabbed a little bit of graph paper and worked it to the proportions I needed and added a few extras. It took me a while to finish the project as I only had weekends and occasionally weeknights to work on it. Also, the staining and finishing obviously took some time.
P.S. This project allowed me to use a Kreg Jig for the first time. I can't believe that I haven't used one before and have since built a few other projects using it.
Wed, 08/20/2014 - 20:31
your friend must've been thrilled! Amazing build and finish!
P.s. Will you be my friend? ;-)
We love this table. It's great for big meals, board games, and family gatherings. I enjoyed the work and finished result. Learned a lot. Thanks for the plans!
These steps turned out great!!! My in-laws were using some busted up pallets as a front porch so I knocked these out in a few hours. The blue stain looks really good and matches the other blue on various out-buildings. Very easy project and the plans available were spot on. Thanks Ana!!
From scrap pile to a fun picnic table. Thanks Ana for the plans.
I adapted the Braden Bench plan to make it more of a built-in feature of our mudroom. It's added wonderful organization to our busiest room.
This was an amazing first project for us. Thank you for the plans and the step by step instructions
Thank you Hilary for the wonderful design and thank you Anna for the plans. I tend to spend my fall and winter months on woodworking and sewing so this is my first project for the season. We had some left over 2.4's and I saw this table and thought, what a good way to use some of that leftover lumber. I didn't really know where I was going to put the table but once it was finished it made itself a home in our spare bedroom. I then saw a battery operated candle lantern that had the "X" pattern and I thought that would go perfectly with the table. Well, that then led me into another project. I wanted to do something different with the lantern instead sitting in on the table top so with some of the leftover wood from the table shelf, I made a post to hang the lantern from. I also used Anna's technique of distressing the edges with Minwax stain marker. It added just enough detail, what a great use of the stain marker.
The end table was my first project of the rustic "X" family. The second was the "X" console which also sits in the spare room. I'm now working on the Farmhouse Bed and am thinking of incorporating the some "X's" maybe on the headboard and also incorporate the hardware onto the headboard/footboard corners. It's not a traditional set that you would find in a bedroom, but it's a guest room and we don't really feel we need a dresser of drawers for our visitors so this works perfectly. It fits right into our decor and is very welcoming.
I love the stain that Hilary used, thank you for the advise. I have a jar of vinegar and steel wool sitting now. Can't wait to try that stain!
Mon, 10/22/2012 - 07:57
wow this looks really good! your cuts on the X's look perfect too
My first project ever... Had a bit trouble convert it all to metric measurements (I'm from the Netherlands), but as you can see it turned out pretty well. I get a lot of compliments, even from the (teenage) friends of my children! They really like to hang out in our back garden all of the sudden ;-)
My wife had seen this post by Ana & thought it'd be great for a writing desk that had storage for her laptop so she'd be able to keep an eye out for the kiddo.
So I decided to use Ana's plans for the storage crates (without the casters) & mount those to the wall for cubbie storage.
I used "white wood" from the local Depot for this piece. However using the common boards will prove to be more cost effective for when you leave your Kreg Jig set at 1/2 inch like myself. :-(
The directions are straight forward, but. clamping & placing screws for the pocket holes were a bit more tricky. Make sure you have ample clamps on hand before attempting this.
Now, you can make the legs as Ana suggests, but if you want "fancy" turned legs are another option. $16.00 per at my local Depot., but. I found stair balusters at $3.00 per & used my miter saw to get them to the proper length per the plans & the same method used to knock off the dowel at the top of them in order to keep it flat.
Finially had it cut, assembled & sanded in 3 hours time. Hence me overlooking the Kreg Jig depth. ( nail gun saved me). You may also want to dry fit everything together. I found out I cut my side aprons too long (3/4 inch) & my inner base was off. Easily solved with scrap wood, glue, nail gun & LOTS of wood filler. Which was sanded & I can't even see the mess up.
Finishing was fun & easy. My color had already been decided via my boss (wife) as it was a fun green color from a Hoosier Cabinet & Matching cupboard I repair & refinished for my daughter's room 2 years ago. As well as the balusters came with a coat of white paint on them already. I sanded the whole project (sans the legs) with 120 then 220 grit paper on my mouse sander & my random orbit. The mouse is able to get the interrior as to where my 5 inch random orbit can't fit. But you could hand sand as well, I'm just lazy.
Once it was all sanded I rubbed down with some denaturated alcohol & old t-shirts I cut up long ago & stored in soft drink fridge packs. You can never have enough of either! I like to use the denaturated alcohol because it evaporates quickly. . .and I like the smell.
I painted the aprons down & let dry. Meanwhile I started staining the portions I could as to not mess up the paint. Once It dried I stained the remaining portions & got the sandpaper out again.
I wouldn't recommend using the power sanders but I did only on the legs due to the prefinished paint that was on them. I wanted to get the wood showing but around the edge of that I wanted to see the white paint & then the green. Careful not to hit the stained the areas!
Once that's done I used my same wipe down technique as after sanding & prepair to glaze. USE GLOVES FOR THE NEXT STEP!
Now you can get latex free or latex medical looking gloves. Just stop that. GO GET MEDICAL GLOVES. I've worked in my profession for 16 years, medical exam gloves & the gloves you get at the hardware store tear up. Grab some BarrierMax brand if you can. You'll be able to rebuild a car engine without tearing.
Now you're ready to glaze & Brooke at KillerB was dead on in her posts on the glaze. Must read!
All in all I think it came out perfect & can't wait to do this again.
In reply to Fancy! by brookifer86
Sat, 10/27/2012 - 12:51
Thanks Brooke,
Had a blast doing this project. Thanks for your contribution.
Nailers may be lazy, but it's more fun ;-)
My grandson wanted a set of peg dolls and a house to play with them in. I wanted to build something that was gender-neutral - so many doll houses are pink and feminine! This doll house is sized just right for his peg dolls and playmobil people. It's made from 1/2" poplar, although it could also be cut from a sheet of 1/2" plywood.
I spent a lot more time on this than I was planning, but wanted to make a couple of enhancements and one thing led to another. I added curves to many of the pieces and there are some mortise and tenons here and there. Note the perpendicular arrangement between the front and the back legs. The front supports the wide arms, while the backs have let ins to support the main weight. All the 2x wood from Lowes was planed down a tad to clean up the faces and sharpen up the corners. We are thrilled with the result!
Sun, 08/16/2020 - 19:59
BRK - Great job on the sofa and chairs. Can you tell me where you found the plans for the sofa and chairs?
Thanks!
Mon, 08/17/2020 - 06:46
Thank you for the kind words.
I actually did my own design using Solidworks. In the shop, I read the measurements I need directly off the model using the e-drawings viewer, so I don't really have "plans" in the traditional sense.
Mon, 09/14/2020 - 10:33
Great Job with the outcome. We are first timers and have built just 1 chair based on Ana White’s original plan. Lot of decisions with cushions & stain type etc but fun & satisfying though.
After a trip to IKEA my daughter fell in love with play food and pots/pans. My mom encouraged me that 14 months isn't too little for a play kitchen so I took the plunge! I adapted the plans slightly - making a single door for the refrigerator, measuring both doors so they overlay and aren't inset, putting one shelf in the oven instead of both beneath the sink, and raising the shelf to add room for pegs. I also decided to nix the backing to save on costs since this will eventually be placed up against a wall.
I really wanted to keep the kitchen as chemical free as possible. Paint chips and scratches, and stain has a ton of fumes. So what to do? Take a leaf from the Shanty Sister's book and dye it with RIT dye! I used one liquid bottle of teal and diluted it with a 1/2 cup of water. There was more than enough to do the kitchen, and the wood took the dye so beautifully. For the top coat, I used non-toxic Mod Podge. The backsplash and knobs/handles/burners are painted with chalk board paint.
For all the little details:
- oven knobs are closet dowel rod holders
- shaker pegs are cheap at hobby lobby $1.47 for 5!
- burners are painted cork coasters
- oven "glass" is replacement frame glazing (plexi) from Hobby Lobby
- sink from goodwill
- "wall mounted" faucet is a spigot with a fun red replacement handle since the handles on the spigots were incredibly boring
- fridge backing is roof flashing for a shiny metallic (and magnetic!) look
- curtain is a 99 cent bandana
I totally adore this little kitchen, and my daughter does too! It's a bit on the taller side but she has time to grow into it. Considering the cheap plastic ones are $100+, I was so happy that my cost was just under $97. Not bad for solid wood with a lot of extras!
Mon, 10/29/2012 - 13:34
Your play kitchen is adorable. Charlie is growing...I remember her from the scooter! :-) I somehow missed the idea from Shanty Sisters regarding the RIT dye. Thanks for mentioning that. Since I can't find the Express Color stain from Minwax in my town, this will be a great alternative for colored stain. Can't wait to read more posts from your future builds.
Mon, 10/29/2012 - 14:11
It's so gorgeous & it looks like she loves it!!!
I enjoyed making this chair. It is very difficult to find 2x2's that are straight and not warped. I decided to make cushions that are different than the original one and added bead board to the back because it will match other renovations I am making to the bathroom.