x frame coffee table
fun table from the X Series
fun table from the X Series
I'm a total beginner and this is one of my first freestyle projects. I built this out of a palette that came with the trampoline I ordered my kids for Christmas. I was taking it apart to throw away then started to envision shelves for the man cave I am putting together. I used some other scrap wood and put it all together for nothing. The only thing I spent money on was the hardware for the cabinets which probably came to around $10.
So it's nothing special, but I like it. It goes well with the old wooden antique crates and boxes I have in the same room. I did not draw up plans or anything, I just jumped in. So it was not based on any specific plans on this site, it was inspired by this site itself and the inspiration I draw from browing.
I did this relatively quick and as a newbie, it feels good to know that I have it in me to make something like this so easily. I'm eager to take on some more complicated projects that require more precision. This was a fun, sloppy project in which I had nothing to lose because it was all scrap.
If you have pets, you know that they're family, too. And when you lose one, it's hard to let them go. But with pet cremation becoming more common lately, it's possible to keep them with you even after they've passed in a pet cremation urn.
But even if you don't want to use this project as an urn, this would make a great little keepsake box to keep a few special items—like a favorite toy, or a collar—in to remember them by.
So in this post, I'll show you how to make your own with some basic tools and lumber.
Aloha!
I was inspired by what I saw on Ana's website. My daughter was obsessed with the PB Teen version of the loft bed, so I tweaked the plans here to make it more like the $2500 bed from the catalog!!!!! Yikes and don't even get me started on what the shipping to Hawaii would be....It was well worth the effort! My daughter loves her new loft bed...Now if I can just figure out a way to get the dog to love the high bed!!!
Cheers, Tina
Sat, 06/22/2013 - 02:57
Aloha Tina!
You did a great job! I was wondering, how high is the bed, room and clearance? We also live in Hawaii and my daughter's room is small. Any feedback on what modifications you made would be greatly appreciated! Mahalo!
Tue, 06/25/2013 - 13:35
Hi Dawn,
Yes, my daughter's room has low clearance, so I tweaked the loft bed height.
I determined what top clearance I could maximize that would allow my daughter to sit up in bed comfortably, but it will be tight as she grows. She's 5 feet now...
Then I tweaked the desk area height as well to maximize without too much of a struggle to get into the area.. I hope this reply is helpful..
Floor to ceiling height is 96 inches. desk area has clearance of 56 inches and from the top of the mattress to ceiling has a clearance of 28 inches.
Aloha, Tina
Tue, 12/17/2013 - 16:06
Im having a problem finding the plans for the teen loft bed shown above. any direction would be appreciated! Thanks!
Tue, 12/17/2013 - 16:59
HI! There are no plans for this loft bed.. I used the plans on this site and just literally DIY'ed to fit my needs.. Sorry I know this doesn't help you much…
If you have a specific question, maybe I could help…
Aloha, Tina
Spent my time home from work building this for the cabin this summer. will be using coushions from ikea that are water and uv resistant as well as double sealed with removable covers for washing.
This was a very easy and fun project. I made mine out of fence pickets and I think the weathered look of the wood is perfect for these ledges. I plan to do a lot more projects from Ana's plans. The directions couldn't be easier to follow.
I found the plans for this rustic console table and only modified it slightly in the height and length to have it fit as a bar/shelf for my kitchen. Turned out even better than I thought it would with a darker finish than I expected using the steel wool/vinegar mixture. A great clean/rustic/classy touch to our old vintage style house. It also helps a lot with space in our small kitchen considering there used to be a much wider dining table in place of the much more space-efficient bar. These plans were very straight-forward and not too difficult to follow and complete with the necessary tools and time.
Awesome plans, incredibly simple to follow. I'm so happy to have found you and your plans on Pinterest, this is a piece we will enjoy for many years!
Thank you!
Built these from an inspired photo of a table from Wayfair. However, I need to customize to fit my friends living space. I routed out the tops and dowel jig the legs. These came out so beautiful!
My husband and I built this as a memorial bench for a friend of a friend that , lost a child to a car accident last year. Hopefully it will give her a peaceful spot to sit in her garden. Thanks for the plans and support!
For my second build, I made myself a desk! I really liked the clean lines of the Parson Tower Desk, but it was too big for my space, and I really wanted some storage. I was a little nervous to make any mods since I'm pretty new to building, but I think the desk turned out pretty well. I used the Tower Desk plans, extended the shelf width to fit my printer (on bottom), and then added a file drawer and a "hidden drawer" for smaller items and documents.
Mon, 03/16/2020 - 20:30
Do you have any plans for the drawers? I really love this modification but haven't made drawers before and would love some tips.
Thanks!
Storage towers. New to this site. Thanks for all the great plans.
Handmade vintage style Apple crate with logo printed in the side. Guide can be found at my blog
Using free plywood scrap from a local business, I made the toy box by cutting the 3/4 plywood into the same nominal sized wood. I filled in the edge of the exposed wood with spackling and sanded it smooth. Two issues I came across with this build. The width of the top shelf, nominal 7 1/4", was too wide so I cut it down to 6" and the middle shelf supports stuck out side of the angled rail so I cut those down by about 1/8". Three coats of paint to cover. I'm pretty proud of myself as this was tagged as an advanced build and it's only the fourth item I've built! Thanks for the great project plans!
This was a pretty simply bed to make and would have only probably taken half a day to build if we were more familiar with building furniture from scratch. Instead of using the pocket-hole screws we just used countersink screws as suggested in one of the comments of this tutorial and that work great. We just filling the holes afterwards before painting. For more tips and advice from what we learned from building this bed you can check out my blog post on the bed http://www.stripesandpolkadotsblog.com/take-back-tuesday-diy-platform-b…
I took the plans for ana white's benchwright coffee table and created this end table. This is an exact replica of the Pottery Barn benchwright end table. The wood was distressed by hand and finished with dye, dark walnut gel stain and three coats of satin poly.
- Brad
Mon, 02/09/2015 - 14:33
Your finish work is phenomenal. Closest I've seen to pulling of the PB finish. What color transtint do you use? Any other finishing tips? I've build a couple of knock off PB pieces, but haven't nailed the finish yet.
In reply to Great finish! by marenras
Mon, 03/09/2015 - 22:10
Hi. Thank you for the compliments. First of all, using Alder vs douglas fir or pine plays a big difference in the finish look, but start with pine and see where you get using this process. I first mix de-waxed shellac with a few drops of medium brown transtint dye. It MUST be de-waxed shellac. Experiment with the amount of dye added. I spray one coat of that shellac and dye mixture on the wood. The shellac seals the wood allowing for even stain absorption and a non-blotchy finish. The dye obviously darkens the wood. Then I apply one to two coats of gel stain. I like general finishes antique walnut color. At the next step I sometimes add a glaze, and sometimes I don't, it just depends on what I am seeing. Lastly I seal the wood with a water based poly. Good luck!
In reply to Great finish! by marenras
Mon, 03/09/2015 - 22:10
Hi. Thank you for the compliments. First of all, using Alder vs douglas fir or pine plays a big difference in the finish look, but start with pine and see where you get using this process. I first mix de-waxed shellac with a few drops of medium brown transtint dye. It MUST be de-waxed shellac. Experiment with the amount of dye added. I spray one coat of that shellac and dye mixture on the wood. The shellac seals the wood allowing for even stain absorption and a non-blotchy finish. The dye obviously darkens the wood. Then I apply one to two coats of gel stain. I like general finishes antique walnut color. At the next step I sometimes add a glaze, and sometimes I don't, it just depends on what I am seeing. Lastly I seal the wood with a water based poly. Good luck!
Tue, 03/31/2015 - 10:04
I love the finish you've done on these, and like someone else said it is the closest to PB I've seen yet! I am trying to fix a horrible stain job I did on a project and had a quick question. When you said you sprayed the shellac and dye, do you mean with a spray bottle? Also what kind of de-waxed shellac did you use? I've never used shellac and I see they have flakes and premixed stuff. Thanks!
In reply to Wow! Awesome job! by colleenps
Thu, 04/09/2015 - 15:25
Hi There. Sorry for the late response. The spray the shellac with the dye using a HVLP sprayer. Google HVLP sprayers. They are very cheap and will help out tremendously. I don't recommend using shellac flakes, they can be challenging for a beginner. I use premixed shellac. I use de-waxed shellac because you can apply polyurethane over it. If you plan on applying shellac as a top coat instead of poly you don't have to worry about de-waxed.
Thu, 03/24/2016 - 11:41
This is absolutely beautiful and what I've been looking for to match my Benchwright coffee table!! Do you remember the dimensions you used?
Fri, 01/21/2022 - 09:26
I really like your take on this PB table. It looks like you changed it significantly from the console table plans from which you derived it, and I have a couple questions. First, the legs do not look like 2x4s; what are the dimensions you used? Second, the bottom shelf is much thicker than the 1x12 from the plans; what lumber did you use? And how is this bottom shelf attached to the legs? Square-notched to fit around the corners of the legs?
Long sideboard.
I've built many custom pieces for local folks but this one with all it's half circles really threw me - how was I going to do those, make them precise and not spend 3 days doing it. It's simple really.... I cheated!! LOL I used a 3 1/8" hole saw for the larger ones and a 1" hole saw for the smaller ones. I also took two boards and clamped them together with pipe clamps and then drilled two at once! It gives it a more consistent look and cuts the time literally in half!
I used a home brew for the stain. Had a friend of mine do the engraving for the front header piece. I think the whole project took between 10 - 15 hours to do because there was a lot of experimenting with the stain and there was also readjusting the sides and top to look how I wanted.
The client loves it and I'll post a pic on my Facebook page of the whole thing loaded up with wine, later today.
This was my first project form this website and it was a great experience. I used the storage daybed plans and modified them slightly so I could attach the Minnie Mouse headboard for my daughter.
Only difference form the plans is that i did not put the trim on the back of the boxes and instead build a craddle about 2 inches deep to hold the bulk of the head board. I used 1/2 sanded plywood to create that and the bow. the mouse head is just pained black where as the bow I got a little more creative with. I cut out the design topped it with furniture foam then fabric backing to hold it in place and create a smooth look. After that I streched the pink fabric over it and stapled it in place on the back before attaching it to the head. I also used some 1 x 2 pieces to run along the back to create feet for the headboard to add stability.
All in all this project was alot of fun and my daughter loved it.
Tue, 02/10/2015 - 17:36
Beautiful job on this build! Love the Minnie Mouse headboard!
In reply to Awesome build! by JoanneS
Wed, 02/11/2015 - 13:53
Thank you very much. Looking forward to the next project a fire truck loft bed for my son
In reply to Wow! This is awesome! I by Ana White
Thu, 02/12/2015 - 08:38
Thank you so much and thank you for this website. Its such a huge help for all the project and ideas I have for around our house. I look forward to many more projects.
Comments
Courtlh
Sat, 03/30/2013 - 22:59
Looks Great
I was wondering what stain you used? I have a lot of douglas lying around and like the way it turned out!
thewoodbuilder
Sat, 04/27/2013 - 11:40
Stain
black walnut (minwax) :0)
givehugsprn
Sun, 04/28/2013 - 00:59
Looks great!!
You did a great job on this build!! Love the way the color turned out.
givehugsprn
Sun, 04/28/2013 - 00:59
Looks great!!
You did a great job on this build!! Love the way the color turned out.
Aesimpson
Tue, 01/27/2015 - 11:49
Cost
Approximate cost for this project? Thank you for the help! :)
jlynchtx
Fri, 01/05/2018 - 23:13
Any warping?
i am thinking about building one of these myself soon. Have you noticed any warping or cracking since you built it?