1. Home

Community Brag Posts

Bunk Bed

Submitted by hoffer5353 on Wed, 02/08/2012 - 14:04

I am very happy to have completed the up portion of the bunk bed. The full size down was done quite sometime ago and I became sidetracked on other projects.
This is a sturdy bed and a favorite in my home. One day I even found my husband napping (hiding) on the top bunk.
The part that I like the best is when we graduate from bunk beds we still have two beds to use.
I also completed the ladder and it works, but I cut it just alittle shorter than the plan called for. Lets just put another on my to do list.

Built from Plan(s)
Simple Bed (Twin Size)
Simple Bed [Full Size Bed Frame]
Simple Bunk Bed Plans (Twin over Full)
Estimated Cost
100-200
Estimated Time Investment
Week Long Project (20 Hours or More)
Finish Used
minwax, red oak stain. Minwax Poly
Recommended Skill Level
Beginner

Comments

hoffer5353

Sat, 02/11/2012 - 14:37

It was surprisingly more easy that I expected. It helped me stay motivated to finish both beds.

Hall Tree with Storage

Submitted by Anonymous (not verified) on Thu, 06/29/2023 - 09:35

The first real project I have attempted. I don't have any real experience with woodworking outside of shop class in junior high school.

My mother has been asking for one of these for many years. Mission accomplished.

Todd North

Built from Plan(s)
Farmhouse Hall Tree

Deko Holzscheiben Spiegel

Submitted by badspiegel on Mon, 10/21/2019 - 02:10

Für den Bau dieses Spiegels benötigen Sie eine Unterlage aus MDF. Eine dünne MDF-Platte zum Beispiel wäre Optimal.

spiegel-mit-rahmen-aus-baumscheiben

Before you be be be be be be be be be be be be be be be be be be be be be be be be be be be be be be be be be be be be be be be be be be Damit Sie wissen, wohin Sie den Rahmen aus Holzscheiben kleben sollen.

Nachdem die Holzscheiben verklebt sind, kleben Sie den Spiegel fest in die Mitte des Spiegels. The whole can same method also with a eckigen mirror and wood scheiben made. Schickt uns euer Exemplar und wir veröffentlichen die Bilder hier auf dieser Seite. Falls Sie auch so einen Spiegel haben möchten, aber keine Zeit, um sich ein Angebot zu machen. Wir produzieren Ihnen den Spiegel dann.

Lieben Gruß und viel Spaß bei der Ausübung des Projektes. Wir sind auf eure Bilder gespannt!

Blog Link
badspiegel
Built from Plan(s)
Full Length Mirror with Sliding Storage Cabinet
Estimated Cost
100
Estimated Time Investment
Afternoon Project (3-6 Hours)
Recommended Skill Level
Beginner

Master Bedroom Update with New Bed!

Submitted by Anonymous (not verified) on Sun, 07/30/2023 - 15:07

Master bedroom makeover ❤️ bed plans are from Ana White

 

Blog Link
llunasol_diy on Instagram
Built from Plan(s)
Modern Farmhouse Bed Frame

Comments

DIY Wood Headboard

Submitted by Anonymous (not verified) on Thu, 08/24/2023 - 12:10

Thank You for this Headboard Plan. It was very easy. Other than painting it I completed it in less than 3 hours. A nail gun sure saves some time. Everyone loved it. They wanted me to put clear coat on it because it looked really good, but I ended up painting it to match my other bedroom furniture which is Black.

Scott Boyd

Built from Plan(s)
Easy Build Wood Headboard (All Mattress Sizes)

Family stocking stand

Submitted by kjoslyn78 on Tue, 12/24/2019 - 14:33

We have a vent-less gas wall heater, but had no mantel for hanging stockings. Thanks to the new plan, we have the perfect solution! We already had the 2X4s left over from the simple panel bed project, so we only purchased hooks and stains for this. 

We shortened the width to accommodate 4 stockings instead of 5 (we cut the 2 cross pieces 9 inches shorter). We also decided to add a large 2X6 cap to mimic a mantel, which really seems to tie it all together much better. We love this and have ideas now on how to make slight changes so it will more easily slide "over"/around the wall heater

(yes, we are not keeping it that close while stockings are hung, so as to not risk catching fire)

Built from Plan(s)
Stocking Stand
Estimated Cost
Under $20 (if you need to purchase wood/stain, we did this for under $10)
Estimated Time Investment
Afternoon Project (3-6 Hours)
Finish Used
Rust-oleum: Kona
Recommended Skill Level
Starter Project

Popcorn Machine Stand and Storage on Wheels

Submitted by advanlente on Sat, 03/28/2020 - 10:55

My parent organization at the elementary school had just bought a brand new popcorn machine but had nowhere to store it. So, I offered to try my hand at building a stand with storage. I knew that we needed the stand to be mobile as the idea was to pop the popcorn in different classrooms for incentives, etc. I modified the kitchen prep cart to have a large cabinet underneath to store the popcorn, bags, etc. The pullout drawer was home to the measuring cups, directions, etc. I used my Cricut and cut out our school logo, placed on the popcorn machine and then polyurethaned it to the side. It turned out great!!! I could not be happier :)

Built from Plan(s)
HOW TO: Small Kitchen Island Prep Cart with Compost
Estimated Cost
$120
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
Red paint and polyurethane

Comments

Faux Mantle

Submitted by Lady Goats on Wed, 04/02/2014 - 12:26

Built a fireplace using Mimi's Faux Mantle plans - I think it turned out great!

Built from Purebond plywood because I can't find straight boards in bigger sizes in my area (EVER!) and used fir 1x's for everything else.

Finished with three coats of Behr paint/primer in ultra white. I will not buy Behr again. Personal preference.

Blog Link
Lady Goats - Faux Show
Built from Plan(s)
Fake Fireplace Mantel built from Pine Boards
Estimated Cost
$90
Estimated Time Investment
Afternoon Project (3-6 Hours)
Finish Used
Behr Paint/Primer in one - ultra white
Recommended Skill Level
Intermediate

Fancy Picnic Table - Definately worth the extra little effort!

Submitted by mlmerrel on Wed, 06/20/2012 - 10:30

Needed a table for our deck, but didn't want to spend the $400-500 on sets at the store. Followed the plan for the most part and it was fairly easy to build. The only thing I did differently was in building the ends was put the "X" supports in after making the "I" shape in case I was off with my cuts.

Spent an hour cutting all the pieces on a Friday night and about 3 hours assembling Saturday morning. Table was ready to eat lunch on!

Built from Plan(s)
Fancy X Farmhouse Table
Estimated Cost
$90 (thanks to the Veteran discount at Lowe's)
Estimated Time Investment
Afternoon Project (3-6 Hours)
Finish Used
None, yet... plan to stain at the end of the summer once the wood dries out.
Recommended Skill Level
Beginner

Comments

mlmerrel

Thu, 07/05/2012 - 12:05

I did not use a Kreg jig because i dont havd one and I didn't try to hide my screws. I did pre-drill all my holes so that I didn't split any boards... and my dad is a carpenter so he helped me attach the 2 cross pieces (which is the only part I had trouble with) to the ends, which we did by just angling the screws in. I will try to take a few more detailed pics in the next few days so you can get a better idea of how I did it.

I Rub (not verified)

Mon, 07/02/2012 - 03:37

Hi, great build !
Could you please explain how and from where did you screw the curved pieces at the bases ?
same question for the table top boards ?

Thank you!

mlmerrel

Thu, 07/05/2012 - 12:03

If you look at the first drawing I have attached it will show you where to screw the curved pieces in. I screwed through the 1 x 4 to attach the smaller curved piece. Then I would screw through the larger curved piece into the smaller curved piece to attach it.

The table top pieces I screwed in from the top into the side pieces that you build first. I used 2 screws per board per side. The 2 boards in the middle should have screws at least 2 inches in from each side. The 2 boards on the end will have one set of screws 2 inches from the side that is next to the boards in the middle. The second set of screws will end up in about the middle of the outside boards. I'm going to attach another drawing to explain. Let me know if this helps.

I Rub

Mon, 07/09/2012 - 11:22

I plan on building the table this week, will use your advice. Much appreciated.

Gus (not verified)

Sun, 07/15/2012 - 16:20

Thank you for posting this. I started the project yesterday and I started with putting the cross braces on first and it did not turn out leveled. I thought that I would try to put it together first and then add the cross braces but was scared if it would hold. Thanks to your post I feel more confidant about it. I am going to make a run to the big box store and start over. Its okay because this is my very first build and I am just happy with my first 45 degree cut with my new circular saw ;) I guess its a learning process.

Thanks again for your post,
Gus

Deck chairs

I Love the modern look of these chairs but definitely felt a little uncomfortable without the back rest so decided to add a little more back rest.

Great plan and easy directions to follow - my first wood working project.

Built from Plan(s)
Modern Outdoor Chair from 2x4s and 2x6s
Estimated Cost
$60
Estimated Time Investment
Afternoon Project (3-6 Hours)
Finish Used
Readyseal dark walnut stain and seal
Recommended Skill Level
Beginner

Comments

DIY RH Dining Table

Submitted by vlilly on Sun, 04/27/2014 - 13:22

I loved making this! I had to travel about 2 hours to get the DF 4x4s which was the only pain in making it. This was my third big project and it wasn't hard at all! It's super heavy so it was a litte tough to turn it over. It only took me about 3 days to make it once I had all the wood.

Built from Plan(s)
4x4 Truss Beam Table
4x4 Truss Benches
4x4 Truss Benches
Estimated Cost
$175-$200
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
Stained with Rustoleum American Walnut, then applied a coat of Rustoleum Poly in matte.
Recommended Skill Level
Intermediate

L Shaped Double X Desk

Submitted by JamieLynn on Tue, 05/26/2020 - 09:35

Made the move to working from home because of the pandemic. After 2 months and no end in sight, I decided I needed a better workstation. Built this in about 5 days. Really nice sturdy desk but make sure you measure how big it is first, I think I could have shrank this down by one less 2x6 on the top. It's a very large desk from the plans.

Built from Plan(s)
L shaped Double X Desk, Featuring Handmade Haven and The Rustic Barn
Estimated Cost
$40
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
Jacobean stain
Recommended Skill Level
Beginner

Truss End Tables

I built these as end tables in my living room. I made one narrower (only 14") by subtracting 3 1/2" from the end measurements and only using 4 2x4's on the top. Quick build, only about 2 hours to put together ( :) ), but the finishing took a while.

Built from Plan(s)
Truss End Table
Estimated Time Investment
Day Project (6-9 Hours)
Finish Used
Primer, 2 coats of an off-white Beautitone Matte finish paint, distressed by sanding and gouging with a 9-in-one tool and rubbing Miniwax Dark Walnut stain in the gouges with a Q-tip, then wiping off. Finally 2 coats of Miniwax Polyacrylic.
Recommended Skill Level
Intermediate

Abi's Castle Loft Bed

Submitted by Cmcisaac on Wed, 07/25/2012 - 19:46

I took on this project about 3-months, I was inspired by the excellent plans provided by fsmumford. I made a couple of modifications, adding a small bump out in the middle, to enhance the castle look, fabric covered seat cushions on the stairs, and an added 2x2 in the middle of the bed to add extra support.

Thanks to fsmumford for the awesome inspirations and great step by step guide.

Built from Plan(s)
Castle Loft Bed with Stairs and Slide
Estimated Cost
$500
Estimated Time Investment
Week Long Project (20 Hours or More)
Finish Used
Sprayed on Paint.
Recommended Skill Level
Intermediate

Comments

Tina Mccarthy (not verified)

Fri, 09/28/2012 - 01:49

Hello,i am a 9 year old girl who would like a castle for my bedroom so it can be cleaner :) how much does it coast?? thank you Bye!:)

Back