Community Brag Posts

Outdoor Sectional and Cocktail Ottoman

Submitted by Annacakes on Mon, 10/05/2015 - 11:48

I made a few changes to Ana's plans to basically work with my cushions.  I found cushions on clearance at Ballard's Backroom.  I had to adjust the size of the sofas in order to fit the cushions.  I also adjusted the height of the sofa, as I found it to be a little higher than I would have liked.  The project took a while to complete, but it wasn't due to difficulty.  This was an easy project for a novice like myself.  I just primed every piece of wood with exterior primer and then painted the whole thing with 2 coats of exterior paint.  It was the drying time that added to the total project time.

I also made a cocktail ottoman out of a lounge chair cushion that I purchased at Ballard's.  Basically, the ottoman is a rectangular box built to the size of the cushion.  I added feet purchased at Home Depot just to make it look a little less box-like.  I applied a couple of coats of primer as well as the exterior paint to every piece.  

Estimated Cost
Not sure really, but I know it was a lot cheaper than the sectionals at the outdoor patio store down the street.
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
Binz Exterior Primer
Behr Ultra Exterior Paint in Satin Finish - Espresso Beans
Recommended Skill Level
Beginner

Comments

Planked Wood Bedside tables

Submitted by JMG on Wed, 07/06/2022 - 19:26

My son moved out and needed bedside tables. I have been hounding him to learn how to build and this was the first project he did! He was super proud of himself and how they turned out. Not bad for a first build! #mompride

Comments

Camp Loft Bed with Stairs

Submitted by Vc1700 on Mon, 10/19/2015 - 12:02

I wanted to create a loft bed for my daughter so that she could have space underneath to play since her room is small. This was the perfect solution! I went ahead and added a stair rail so she could feel a little safer coming down the stairs (she is 4 yrs old). She loves her princess bed and what's best she wants to sleep in it instead of with mommy and daddy! This was my first wood working project. 

Estimated Time Investment
Weekend Project (10-20 Hours)
Recommended Skill Level
Beginner

Baby Doll Crib and High Chair

Submitted by Anonymous (not verified) on Tue, 12/25/2018 - 20:06

Love getting to watch my daughter play with stuff that i made her.

Recommended Skill Level
Intermediate

Comments

Farmhouse Table

Submitted by teeninyg on Sun, 08/21/2011 - 13:30

This was our first project from the website. I fell in love with the concept and love the finished product. My husband and I worked on it for a full weekend, and now we have a table that the whole family can sit at. The plans were easy to follow and came together nicely.

We also decided to do the Simple Stackable Outdoor Chairs. They are large and comfortable. I did adjust the seat board length to 19 1/2 to give it a little over hang. One down and 4 more to go.

Estimated Cost
$200.00
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
Since we didn't get furniture grade wood we have to do a lot of sanding. Then we used 2 coats of an oak stain and 2 coats of polyurethane to seal it.
Recommended Skill Level
Beginner

Comments

Finns-Dad

Tue, 03/20/2012 - 03:37

Great job. Both the table and the chair look really good. I am curious how the chairs hold up. Are they sturdy? Anything you would change or do differently? Thanks.

Farmhouse Writing Desk with Turned Legs

Submitted by kwildman on Mon, 01/07/2019 - 08:53

I modified the Small Old English Style Farmhouse Dining Table plan to build a writing desk.   I used five 1x6 boards for the top for a width of 27.5 inches.   I made my desk 56 inches in length.  I put the drawer on the long side like a pencil drawer.   I did use the legs that Ana recommended in the plan.   I love how it turned out.  I used dark walnut danish oil and dark wax for the finish.  

Estimated Cost
225
Estimated Time Investment
Day Project (6-9 Hours)
Finish Used
I used Watco dark walnut danish oil and Minwax dark paste wax.
Recommended Skill Level
Intermediate

Comments

kwildman

Fri, 10/04/2019 - 21:46

Thank you!  I used Watco Danish oil and I used Minwax dark wax.  I've tried alot of different wax brands and I always come back to Minwax.  It dries the hardest in my opinion.

Platform Bed with Shoe Trundle

Submitted by vendo on Tue, 11/22/2022 - 08:08

We had some bulky items that needed to be stored. So I came up with dimensions for a low platform bed so the bows could slide under. I decided to build a faux drawer to conceal the bulky items and added shoe storage into the faux trundle drawer. Of course I used one of Ana's plans for the basic idea and modified from there! 

bed with trundle storage bed

bed legs

bed frame 2x4

inside bed frame

bed support

Recycling and Garbage Cabinet

Submitted by DIYMomof4 on Wed, 01/23/2019 - 15:16

We needed a place for our garbage/recycling bins that would look nice and was inaccessible to our dogs.  I decided to make two drawers for the bins and two drawers for storage.  I found a set of 10 drawer slides on Amazon for around $50.  They are heavy duty and full extension.  I measured our garbage bins and built to size.  The total height of the cabinet is 36" including the countertop.  The cabinet width is 35.5" and the depth is 20".  The butcher block countertop(25" by 48") was purchased from Home Depot for $98.  I only had to do a light sanding, router the edge, and apply a finish.  The cabinet will be located along a wall and have room for a counter height chair.  This will allow my youngest to have a snack while I work in the kitchen.  Although I didn't use a specific plan, I used ideas from several of Ana's designs.  Thank you for the inspiration Ana!        

Estimated Cost
$300, but I have leftover wood and drawer slides
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
The stain is a mixture of Varathane Traditional Cherry 3X and Minwax English Chestnut.
I used Waterlox sealer/finish VOC compliant on the whole cabinet. For the countertop, I only used the Waterlox. Waterlox is really beautiful, but you will need a respirator mask and plenty of ventilation.
Recommended Skill Level
Intermediate

Comments

Pallet Inspired Coat Rack

Submitted by thehallway on Sat, 02/09/2019 - 15:33

I built the coat rack along with the mail sorter and rustic bench for the long hallway to the garage since our new house doesn't have a mud room. I modified it to a length of 6'.  All but a couple pieces are made from poplar.  I burnt the stained pieces with a torch, then put a quick coat of Special Walnut on them.  The painted pieces are Rustoleum Weathered Wood.  Hooks are from Home Depot.

Estimated Cost
<$100 due to already have wood on hand
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
I burnt the stained pieces with a propane torch, then put a quick coat of Special Walnut on them.  The painted pieces are Rustoleum Weathered Wood. The mail sorter has Chalkboard Paint on the front pieces.
Recommended Skill Level
Beginner

Comments

dress up station

Ive made a couple of these dress up stations now, for presents for my daughters friends. I plan to make her one next!
Plenty of room for storing all their fancy dress items :)

Built from Plan(s)
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
wallpaper and paint, rubber lace lining for the shelves, wooden ball feet, decals, mirror, name, hooks
Recommended Skill Level
Intermediate

Above Toilet Cabinet

Submitted by Smokeydog on Thu, 12/24/2015 - 12:58

I built this above toilet cabinet for my son and his wife for Christmas. They moved into a new house and wanted this additional storage space.  Turned out pretty good!

Built from Plan(s)
Estimated Cost
$135.00
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
BEHR Satin Paint with primer
Recommended Skill Level
Intermediate

The Console Table

Please tell me I’m not alone…!! I must admit that I have found myself (on more than one occasion) just staring at a room for what seems like an eternity…trying to figure out why the space isn’t functional or just feels a bit “off”. It was during one of these “I dare you to blink before I do” staring sessions that I decided to build a table for my guest room.

Lucky for me, I can always count on Ana’s plans to rescue me from decorating madness! Well at least when it comes to the furniture part. (For everything else…I probably need lots of therapy!)

But seriously…anyone else get caught up in the time-warp-room-stare?! I can’t be the only one… :-)

My console table's complete story: http://gleeinspired.blogspot.com/2011/03/console-table.html

Estimated Cost
$25
Estimated Time Investment
Afternoon Project (3-6 Hours)
Finish Used
One coat of Minwax Jacobean stain.
Recommended Skill Level
Beginner

Comments

Guest (not verified)

Sat, 10/15/2011 - 21:49

How did you go about finding the wood that you purchased? I'm a newbee and all i have are Lowes & HD around me, also since I'm just starting out I don't have a saw- any suggestions?

claydowling

Sun, 10/16/2011 - 02:22

Lowes and Home Depot both sell wood. However, it's worth finding a local lumber yard to get a better quality of material. Trying to build a table with material from a big-box store will be an exercise in frustration, because it will warp on you, and your nice flat table will develop some interesting twists that will probably keep all four feet from touching the ground at once. I've been there plenty of times, and it's very frustrating to tear something apart to replace wood that warped after everything was assembled.

If you go to a lumber yard and ask for #2 pine, you should get something pretty stable.

You'll also definitely need to pick up some tools. Anyplace that sells lumber has a saw that they can cut material to length with, but none of them will make cuts accurate enough for building furniture. The only cuts you want made for you are those necessary to get material into your vehicle.

There are hand tools of acceptable quality sold at Lowes and Home Depot (well, mostly acceptable quality: nobody sells a decent chisel). They're cheaper and a lot less intimidating than the power tools, and with a little practice it's easier to do accurate work. The downside is that you'll have to hunt a little more for resources to learn how to use them.

brookieanne (not verified)

Thu, 10/20/2011 - 15:03

I love the table - it looks great!
And the time-warp-room-stare??? Yep. That's why I'm on Ana's site! We just moved into a new house about 2 months ago and I need some furniture to help pull some rooms together!

Farmhouse TV console table

Submitted by Anonymous (not verified) on Fri, 02/17/2023 - 11:45

I built this TV console based on Ana’s plan and some modifications from The Turquoise home. Made it 6’ long and a bit lower to fit all my elephants below the TV.
It turned out beautiful and suuuper heavy.
Thank you Ana!

Built from Plan(s)

Modern Angle Chair

Hello Ana, I decided to modernize your project a little ...
This is 3DS MAX ... ;)
Thank you for your work ...
Regards, Serge...

Built from Plan(s)
Estimated Time Investment
An Hour or Two (0-2 Hours)
Recommended Skill Level
Advanced

New bed for my youngest

Submitted by Anonymous (not verified) on Mon, 04/10/2023 - 15:45

Moved into a new house after a fire destroyed almost everything, rather than buying new beds for my kids, we decided to build! They turned out beautifully, and the kids love them! Decided to modify the camp loft bed, removing the stairs and using the foot of the bed a ladder style.

Comments

Liquor Cabinet from Benchmark Storage/Media Unit

Hallelujah!! Finally, somewhere to store all our alcohol-related necessities :) We adapted Ana's Benchmark Storage Unit to work as a liquor cabinet. We kept the basic design the same, but added some stemware storage across the top (a feature we loved in a Crate and Barrel liquor cabinet that was $$$$$) and some decorative molding to bulk it up a little bit. We lovvvvvve it! Thanks Ana!

PS: everyone please check out our blog for more details on this and other projects!

http://strawbridgestuff.com

Estimated Cost
$100 (using paint and supplies on hand)
Estimated Time Investment
Week Long Project (20 Hours or More)
Finish Used
White semi-gloss paint followed by a thin coat of Minwax stain (Ebony) wiped off immediately after applying (more details on our blog)
Recommended Skill Level
Intermediate

Comments