Community Brag Posts
Truss Dining Table
![](/sites/default/files/truss1.jpeg)
Followed the plans pretty closely other than making it a tiny bit shorter to fit in the living room. The hardest part was just smoothing out the top because I could not find straight boards. ended up using a hand planer and a ton of sanding after it was put together.
Feels very solid.
![](/sites/default/files/truss2.jpeg)
Two-Toned shabby chic 4X4 Truss dining Table and Benches
![](/sites/default/files/image_279.jpg)
4c4 truss with dark walnut top 4" thick, base stained dark walnut with white wash and shabby etching.
![](/sites/default/files/image_293.jpg)
![](/sites/default/files/image_298.jpg)
Comments
Tue, 11/18/2014 - 04:55
Choice of finish
I know right, i think looks even more amazing when seen in person. I did 2 chairs to match as well. which i will load up now. :0)
Sun, 05/10/2015 - 16:23
nice table
Did you frame in the while thing with 2x4 to get it looking so thick?
Tue, 01/10/2017 - 06:22
Thickness of Table
How did you get it so thick? Is this doubling up the 2X4's to make it double the thickness?
Sideboard / buffet table
![](/sites/default/files/20170216_081723.png)
My husband built this buffet table as a mother's day gift, for me. It matches my farmhouse dinning table, that he also made from Ann white's plans. He Installed soft closing drawers. It took him about 17 hours.
American Girl Doll House-tweeked
I loved the AG Doll House plans you designed and when my granddaughters asked me to make one for them.... how could I resist. Unfortunately my 7' basement ceiling and steps created a challenge. As a 72 year old female, there was no way I could man-handle a 6' x 4' x 2' - 3/4" plywood project in addition to the challenges of my work space. I was not going to disappoint my granddaughters so I had to come up with a plan. Instead of making the doll house in one piece, I decided to make it as 3 individual boxes (the floors) and stack them on top of each other. Not only would I be able to handle them mostly by myself, but I would be able to work around the low ceiling and transport them up the steps. With only a few modifications to the original plans, I believe I came up with a workable solution.
Instead of the sides resting on top of the doll house floor, I extended the sides 3/4" longer to run past the floor for more stability. I also used 1x 2s to frame the inside at the top of each unit for more support and to help in keeping the box square. This may not have been necessary, but I just wanted to make sure it would be sturdy. The main change to the original plan was to add 1" x 3" routed trim to the outside top of each box having it extend 3/4" above the sides. This created a pocket that allowed the next floor to nestle in place and protect it from sliding off in case any little ones decided to climb on it. I also made a 2 car (30" x 30" x 24") detached garage for the AG vehicles. I did fill the holes, plugs, and errors with wood putty, sand numerous times, prime and paint. It was a real help to add some of the paint to the primer because plywood really soaks it up. I think this kept us from having to paint a 3rd coat. The floor was painted a med dark brown, but wiped with the grain before it dried to give a wood grain look.
I finished it in time for the birthday party even though it took 3 vehicles to transport it to the destination. It was a joy to see their faces when it was unveiled and to watch them climb on it of course.
![](/sites/default/files/1_IMG_6016H.jpg)
![](/sites/default/files/2_IMG_6143_H.jpg)
![](/sites/default/files/4_IMG_6153H.jpg)
![](/sites/default/files/6_IMG_6170H.jpg)
![](/sites/default/files/7_IMG_6181H.jpg)
Modified Wide Cabin Dresser
I live in a small mobile home, so I didn't make the dresser as wide. I also used a little combo of the 2x4 look from the Rustic X Console (which I already made a modified version of) I liked the 2x4 look and I wanted the dresser a little sturdier because I was making it a little taller without a bottom shelf. It's 44" wide and 40" tall. I wanted a space where my dog could have her bed out of the way (you can already see her in her spot :) ) Because I didn't make it as wide I also thought 3 drawers to the top would be too busy, so I put two to the top and one large bottom drawer. It is already given me more room for clothes.
I have to estimate on skill level and time, because I do it here and there, but I probably finsihed this with in a week. I haven't been real good at keeping track of costs because I have bought wood here and there, but this may have been around a $100 more or less?
This was also my first project with drawers. The first was a toughie...but the other two went right in (???).
But I am proud of it and love it! Without Ana and her website I wouldn't have been able to do it....
I also have 4 other dogs who started out as fosters....so more space saving projects on my list....tons to do! So, please don't look at any mess, still lots of work in progress :)
![](/sites/default/files/3154820590_1358571558.jpg)
![](/sites/default/files/3154820591_1358571558.jpg)
Comments
Sat, 01/19/2013 - 04:51
Lovely build and excellent
Lovely build and excellent space saver too. Also, so kind to keep your furry buddies comfort in mind as well.!
Sat, 01/19/2013 - 04:53
Lovely build! Love the
Lovely build! Love the adaptations to fit your space AND make a wonderful place for your furry buddies!
Cool Dresser
![](/sites/default/files/Jacks%20dresser.jpg)
This project is built from a/b sanded plywood, pine select trim, and pine 2x2 furing stirps. I was a little scared to do the drawers as i have not had great luck with them in the past. But after watching some videos and reading the tutriol for the slides i tackled it and it came out great. I didnt want the wheels so i made the side 2" taller and it worked out great.
Queen size Farmhouse Bed
![](/sites/default/files/IMG_20201126_094514_730_0.jpg)
Stained Aged Barrel with mixed Whitewash
![](/sites/default/files/IMG_20201126_094514_730.jpg)
Dollhouse Bookshelves
![](/sites/default/files/3154820727_1358824648.jpg)
We used Ana’s plans in the Grade 12 Custom Woodworking class this semester at St. Theresa of Lisieux CHS in Richmond Hill, Ontario, Canada. Surprisingly the all boys class really enjoyed the project and there effort shows in the final products. We built them to order and sold them at cost to the other teachers to replenish the ever shrinking lumber budget.
For the first few bookcases we used wood screws,dowel plugs, and biscuit joints, but quickly smartened up and purchased a Kreg Master System. If you were on the fence about getting this system, then take our advice and go out and buy one. We now have a second system on order.
We added customizations with mitered trim pieces, custom colours, wallpapering (see pink shelf), and choice of a backer board or choosing to leave it open with trim all around. The project is such a hit, we now have 6 more shelves on-order for next semester.
Thanks for a great website.
![](/sites/default/files/3154820728_1358824648.jpg)
![](/sites/default/files/3154820729_1358824648.jpg)
![](/sites/default/files/3154820730_1358824648.jpg)
![](/sites/default/files/3154820731_1358824648.jpg)
(White, Pink, Lime Green, Wild Grape)
Because we used Pine with knots we used spackling compound to seal the knots and all parts were sanded with 80, 120 and finally 220 grit sand paper. Prior to painting in all corners we ran a bead of paint-able white caulking to give a nice finished look.
Comments
Wed, 07/31/2013 - 12:55
I love that you did this as
I love that you did this as part of class! They're gorgeous!
X Coffee Table
![](/sites/default/files/image_331.jpg)
A rustic x table for our cottage!
Comments
Reclaimed wood-look headboard
![](/sites/default/files/IMG_2153a.jpg)
I used wacman's idea for faux reclaimed lumber to make this headboard by using a saw to score lines in the long boards to make it appear to be smaller pieces ( http://www.ana-white.com/2017/01/DIY_furniture/farmhouse-faux-reclaimed… )
I played with different stains, mixing some, overlaying others. I darkened the "seams" in the boards with some java glaze
The 1x3s and 1x4s were from the bottom of the stacks at HD, so they had lots of gouges, nicks, and imperfections that were perfect for the "rustic" look. Had to do a bit of sanding, but overall the "ugly" lumber ended up looking great.
One change to the plans I'll make next time. the top & bottom 1x4 boards end up getting covered by the final trim 1x4s. Next time I'll use 1x3s for the trim pieces so that a bit of the top/bottom 1x4s show.
My build of the Potter Barn Keyhole Desk
![](/sites/default/files/Keyhole%20Desk%20with%20Chatham%20Leg_0.jpg)
I know it's been a while since you and Pneumatic Addict worked on the Pottery Barn Keyhole Desk but I wanted to let you know I was so inspired by it that I built my own. I also made a build video: https://youtu.be/AzkjgI3VmAo. Thanks for your great inspiration!
Comments
new mudroom!
![](/sites/default/files/IMG_20140921_192305_880.jpg)
The drawers were my very first project! I have never built anything before and I loved how deep the drawers were here. I'm really thankful my dad helped! Super happy with how it turned out!
I picked up the hutch at an old barn sale for $65. It's perfect to hold all of our coats and stuff and the shoe drawers are super deep and hold ALL our shoes. Here's our story... http://onblissstreet.blogspot.com/2014/11/mudroom-makeover.html
Comments
Retro Art Station
![](/sites/default/files/20170223_220314.jpg)
We decided to turn this little retro play kitchen into a kid art station. It's so adorable.
Comments
Tall Planters
![](/sites/default/files/Planter%201.jpg)
These were made using the Tall Planters plan...4 cedar pickets for each one. I also used cedar rough cut trim for the 1x2's and 1x3's. They are painted to match cedar shutters I made for my parents mountain house. I used Cabot's Solid Color Acrylic Deck Stain in Evergreen to protect the planters exterior. The only alteration to the plans was adding the top trim. I used 1x2's cut at 16" long each on a 45 degree angle to form the box. I glued and nailed together the trim before nailing into the tops.
![](/sites/default/files/Planter%203.jpg)
Raised Planter Box
![](/sites/default/files/3154820947_1359145455.jpg)
Living in Tempe, Arizona, I am always in need of creative planter boxes so that I can garden with more ease. I loved this tutorial and recommend it to anyone, even beginners! A full tutorial can be seen here: http://www.barerootgirl.com/homemade/2012/11/5/homemade-diy-raised-gard…
![](/sites/default/files/3154820949_1359145455.jpg)
![](/sites/default/files/3154820950_1359145455.jpg)
![](/sites/default/files/3154820951_1359145455.jpg)
![](/sites/default/files/3154820954_1359145455.jpg)
![](/sites/default/files/3154820953_1359145455.jpg)
Balin Console Table
![](/sites/default/files/Console.jpg)
My husband built this in his spare time and I stained it, makes a great addition to my foyer!
Comments
Mon, 11/24/2014 - 12:06
Very nice! I love the
Very nice! I love the handles that you chose! Nice work!
Step stool
![](/sites/default/files/2017-02-26%2000.55.44.png)
Step stools I built for my kids to use. The second one I actually used glow in the dark paint for the lettering and the stars. Took me longer to paint since everything was hand drawn / written. Total time for the project would have been a few hours if it wasn't for the paint and poly added.
![](/sites/default/files/2017-02-26%2000.56.32.png)
Console Table
This was my first indoor woodworking project, where it mattered if the corners were 90 degrees and the colour matched and the wood was not warped.
Even when the lumber yard gave me the wrong width of board, did all the cuts and I didn't notice until I was home, laying out my pieces and measuring everything, I will still able to complete it.
I went with the 10" (9 3/4") wide top instead of the 12" (11 3/4") rather than go back to the lumber yard and have it recut. I was anxious to make my project and it was a hassle to drive that distance. it didn't have the 1 1/2" overhang that the larger width would have had but it fit in my tiny space better.
The next time I visited that lumber yard for more wood, I got my money back and I learned a valuable lesson - just because the lumber yard staff are picking up the wood for you, you need to read and check. I didn't go closer to see it because of Covid-19 restrictions but next time I will ask to measure it and check it before I bring it home. I've learned to carry my tape measure with me, just in case!