Providence bench
My first project from plans found on this site. Thanks!
My first project from plans found on this site. Thanks!
Easy plans to follow and my wife loves the results! Will be used as a book shelf for home schooling our 3 kids.
Just love this and there is storage inside the bench.
Sylvie
It is almost back to school time (20 days) and I am home alone with my 4 kids while my husband is away on business for 2.5 weeks. What is a woman to do? Find a project.
There has always been this weird little nitch in the front "formal living room" that I use as my photo studio. It is only 55 1/4 " wide and 7" deep so nothing I could find would fit there- I usually have a coat rack there- and last year I had my boys' backpacks for school hung there. But... This year my twins are going off to school- which means 4 backpacks. Enter project! I modified the Small Locker Project (http://ana-white.com/2010/08/still-not-locker.html) and built the lockers to 1.) fit the space 2.)to fit their existing shoe baskets that used to be in an Ikea Expedit shelf.
I am soooo pleased with how they turned out.
I built this in pieces- first the bench, then the dividers and backing, and then the cubbies above. I built it using 1/2 in birch veneer plywood (that happens to be Purebond) from home depot. I had Home Depot cut the wood (which I normally do for the easiness factor- but this time it was a mistake. My favorite cutting guy was on vacation and I wanted to start now so I let Moose cut it. So not a good idea. One piece was 15" wide at one end and 15 1/4 " at the other... I gave him a cutting guide, hello?
Good thing I have my own table saw so I could fix it. (from when I built my girls beds: http://ana-white.com/2010/05/plans/corner-unit-twin-storage-bed)
I sanded and stained the wood with custom stain from Sherwin Williams. I then gave it 3 coats of waterbased Poly .(sanding between each one)
Then I glued and nailed it together (for the record, 1/2 plywood is harder to shoot nails into- just sayin')
Then I had the wood cut for the dividers and back (sand, stain, poly, glue and nail, install)
Finally the cubbies at the top: (sand stain, poly glue and nail, install)
After that I put on the trim so now I have a built in lockers for my kids- their backpacks and shoe baskets fit exactly, and there is room for when they grow for the backpack hooks to move up. I plan to use chalkboard vinyl to put their names above the hooks. Thanks Ana again for inspiring me!!!!!!
We were throwing all of our woodworking supplies into this closet off my patio, and it was really hard to find what we needed when we needed it.
So we made this shelf using two 2x4x10s cut to an inch less than 5ft each for the legs, and 4 1x3x8s cut to half inch less than 2ft each cut. (one board per shelf). (Measurements are for minimum waste)
Kreg jigged the 1x3s together 4 deep for each shelf. Used 1 1/4" Kreg screws.
We might go back and add a shelf or two to fix the odd spacing at the top and give us more shelves for the little things.
We did make some revisions to the plans, including making it shorter and not as wide.
I used the farmhouse table plans but substituted almost 100 year old wood from our family farm. Pocket hole joints on the table top and lots of sanding...! The bench was made from the same wood and followed roughly the plans for the dining bench.
Using Ana's Ultimate Workbench Plan and her easy drawer method I built this. I decided to do storage carts that roll in and out for small scrap lumber storage. The Kreg Foreman got it's own cart, I made it so the deck of the machine was at the same height as the work surface. I added a drawer so all of my kreg bits and screws can be in one place. I had batteries and chargers laying all over my small shop, so I incorporated a battery charging drawer. I'm excited for the projects to come using my new set up!
I used pine for the 2x6's and 2x4's (and 1x3's) and fir plywood for the headboard, footboard and drawers. I also modified the drawers and used a square piece of 3/4" plywood for the bottom - made it way easier to build the drawers square so they slide nicely!
The pulls are from Lee Valley.
Sun, 08/12/2012 - 17:36
I love how the storage drawers are off the floor. The finish looks great and the "in process" photos help a lot. Great Job!
This bench for 2 was made of leftover pine wood planks I had in my cellar. I used different saws and a router to make sure the ends where smooth and give the overall project a elegant touch. Since I love to see the texture of wood I chose a walnut stain.
Made this over the weekend with my Daughter. Gray oil based stain.
A sideboard I built. Took about two weeks. Finish is General Finishes antique white milk paint with a van dyke brown glaze over it. Finished with a top coat of polycrylic
Mon, 08/13/2012 - 18:33
It does look great and I second birdsandsoap, love the finish and beadboard. On a side note... I also like the color of your wall! What is it?
Tue, 08/14/2012 - 09:20
thank you for the commnets. The wall color is Distance by Sherwin Williams and thats funny you say that I have been thinking about changing it because it seems a little too dark
This was my first woodworking project and I absolutely love it. I think it turned out amazing and was actually very simple to do. I just got some construction grade lumber from Home Depot and borrowed some tools and got started. I did have to buy a Kreg Jig, which is an amazing tool by the way. I am not complaining about having to buy it since I have used it on many projects since!
A cutting board seems to be a right of passage for any new wood worker, that and making a mallet! I’ve already made a mallet and have been putting off making a cutting board so I figured now was as good a time as any. I’ve always liked the look of edge grain maple and I had some scraps of maple that were too narrow for most projects so I figured that I would go for that look. To spice it up a bit I decided to add a couple of accent strips of Oak.
Our four boys matching double bunk beds recently succumbed to being used abused by four boys for 12 or so years, and I have always wanted to make them a pair of triple bunk beds for when friends come over. The broken pieces of a bed that had survived numerous military moves finally gave me the jump start I needed to finally get this job done. After about a day of measuring, pondering, and configuring, I came up with what I thought were good dimensions for the project. I increased the height of the corner posts to seven feet to allow for a higher top bunk, and squished the bunks a little tighter together as well. This ended up giving me a 26” gap between the bunks. When I build the next one, I will cut this down to 24” between each and give a little room room to the top bunk. Trial and error I guess. I added a 2x2 all the way around the bottom because although I wanted it very low, I didn’t want anyone feeling like they were sleeping on the ground, but I also didn’t want some 1” or 2” gap below the bottom bunk for balls, cars, and LEGOs to be lost. The guardrail was shortened a little based on what wood I had left at the end. The ladder I decided to build upright/no angle, which necessitated that I fashion the ladder myself out of some strip of metal that I think is meant for some sort of roofing purpose. Oh well, it worked. I wanted to do this because the bed is meant to be able to be disassembled, and if I had simply screwed the ladder to the bed, it would have gone against the “disassemble-bility” of the project. Last thing to note, the barn red staining was quite messy and a huge time investment, so although I stated it took 10-20 hours, probably 12 of the 20 hours was in the staining. We are all thrilled with the look of it though, so I guess it was worth it in the end. I hope this project was worth the read. Enjoy!
I took Patrick's design and expanded it. The dresser is deeper and has one more drawer than the original. The finish is only slightly distressed because that's how my 'client' wanted it. The drawer slides were the toughest part. The carcass MUST be square or at least very close. I built the whole thing, then tore the carcass apart and rebuilt it because my first attempt was not square enough. Obviously the drawers won't slide smoothly if it isn't square.
Edit: I get a lot of requests for the plans and/or cut list for my modifications. I do not feel comfortable re-posting the plans on my website and can not do it here either (only pictures can be uploaded). Please feel free to e-mail me (bbomerATgrvland.com) or request the plans in the comment section of my blog (linked below) and I will send you a .pdf that shows my modifications at each step.
Edit 2015-01-26: I do not believe that I am getting notifications for all the comments here, so please use one of the methods above.
Edit 2015-01-28: I have posted my alterations here: http://grvland.com/wordpress/2015/01/28/dresser-plan/. Please comment there with any questions, because I can not guarantee that I will get notified if you comment here.
Sun, 03/16/2014 - 19:08
I would love to receive a copy of your modified plans. My email is [email protected]. It looks great and is just what I need for my daughter's room!
Wed, 04/02/2014 - 20:24
Please send me the modified plans to [email protected]. This piece looks amazing, and I can not wait to try it out!
Thanks,
Sara Mitchell
Mon, 09/15/2014 - 07:36
Please send a copy of your modified plans! This dresser is beautiful, and I would love to try and recreate it. Please send the plans to [email protected].
thanks!
Lauren
Tue, 11/04/2014 - 12:13
Please send me a copy of your modified plans. The dresser looks great! You can send it to me at [email protected]. Thank you very much!
Ana
Sat, 12/13/2014 - 20:24
Please send me a copy of your modified plans! Its just what I'm looking for. [email protected]
Sat, 12/27/2014 - 17:17
I would love your modified plans for this dresser! my email is [email protected]
Thanks
Sun, 12/28/2014 - 09:07
If possible I would also love to use your expanded plans. My email is [email protected].
Thanks and happy holidays.
Steve
Sun, 12/28/2014 - 17:07
I would love o get the updated plan for the larger dresser. Please email to [email protected]. Thanks!
Sun, 12/28/2014 - 21:58
I would love to have a copy of your plan as well. My email is [email protected]. Thank you in advance.
Sat, 01/03/2015 - 14:35
Hello,
I would also love a copy of your plans. My email is [email protected]. Thanks in advance :)
Tue, 01/05/2016 - 10:32
Hi .. I was just wondering if I could get the free plan for a three drawer dresser ? Nothing fancy , just wat to make one for my wife for her b-day , comin up soon ,, any help would be great ,, Thanks , and hope you have a happy new year/ Bye for now , Claude.
This is a project I completed last summer. I made some revisions to the original plan. First off, I wanted a corner sofa, so I had to figure out how the corner would work. This was my first ever wood working project and I'm not an architect or engineer, so it was quite challenging. I made a mini model out of foam core to give me a visual of how it would all work together. That was a tremendous help and I recommend doing this to anyone just starting out.
I did not use the part of the plan that included the foot pedestal. Instead, I built the sofa flat on the ground and in the end added store bought feet mainly because I liked the looks of them.
The sofa was built exclusively with the Kreg Jig, except for attaching the horizontal back pieces. I could have use the jig for that part as well, but liked the rustic look that screwing them in to the back braces provided.
I didn't want a padded back because the sofa sits outside on a covered, screened in patio year round. I wanted the ability to take off and wash all the cushions, or to use the bench without the back cushions sometimes.
The 2 sections of the couch were built as independent units and are movable, so one can sit across from each other. Both sections have ample storage.
My husband and I took this on as our first project.. very happy with the results!! Our american bulldog gets kennel anxiety so we thought we would try this and he loved it right off the back! It is nice and lg he is 90lbs and our little one has made his way in with him to and he is 25lbs they both fit comfortably!!!
Followed the farmhouse instructions - worked great!!
The two tone finish matches the table I built