Adirondack chairs
I made a pair of these
and my friends arrive early so they can have one to sit in. The other is mine!
I made a pair of these
and my friends arrive early so they can have one to sit in. The other is mine!
We used a $35 craigslist table top with a leaf some 50 cent cull MDF pieces and about 80 in screws, paint and wood and got a beautiful counter height dining table! Loved getting to know my Kreg Jr.
For our wedding we wanted to make seating for our guests. We ended up making 16 chairs total over several weekends. We also made the pergola.
Sun, 07/07/2013 - 16:27
These are so lovely! Congrats on your DIY wedding, the setting is beautiful. Popped over to your blog, your new siding and floors look super too. :)
In reply to Beautiful chairs! by JoanneS
Sun, 07/07/2013 - 18:30
Thank you so much. It has been a labor of love. Being able to have our wedding in our backyard made it so much more special.
We needed a bookcase to fill a void in our living room and this was it. I altered the dimensions to increase the height to 72.5". I also added crown molding to the top which turned out nice. I used the same Bombay mahogany stain suggested by a previous post.
Hey yall! This is Sara from OnHouseandHome.com with plans for my favorite build ever: my son's baby crib for less than $200. This is a super simple design that is fairly easy to build. It's built from pine and poplar, both available at Lowe's or Home Depot, and I only used basic tools like a table saw, drill, kreg jig, and router to buil this. The crib has survived a move to a new house and is currently housing my 2nd son so I can promise it's just as strong as it is stylish!
This end table was the second woodworking project I have completed. The first was a doghouse that came out pretty well but was definitely not "furniture grade," so this time I knew I needed to up my game. For the most part, I think I did do that. It was not a completely seamless process, but considering my newness and the number of new skills involved (e.g., pocket holes, staining and polyurethaning) I like how it came out. It also showed me how I can continue to improve my skills so that the next projects will be even better still. The pine 2x4's were very easy to work with and dried out nicely once I got them home to reveal a nice grain. Clearly I have to learn how to cut boards to the same length, but that's part of what gives the project it's character (If you believe it then it's not a lie.). I also need to figure out how to sand polyurethane without scraping it and the stain all off. Thanks to Ana for developing this great page and for all the really nice plans on here. It made the whole process far less intimidating. (sorry for the sideways pics)
Sat, 01/01/2022 - 18:22
Way to go, lots of great learning here and it looks pretty and functional! Thanks for sharing!
Saw this bar in the PB catalog and loved it! SO excited when I found it on Ana's site... This project was a little more time-consuming than the others I've done. A ton of 2x4's are used, and we bought stud grade 2x4's...definitely got our money's worth out of our palm sander. The table top gets pretty heavy so I couldn't have done it without a hand from the hubbs. We built four separate pieces - the table top, the lower shelf/box, and the legs. We stained everything, then assembled the pieces. Finished assembling this the morning of my work Christmas party, which we were hosting. The perfect drink station!
Our niece recently moved to Virginia to live with us. I may or may not have been pinning ideas to a Pinterest Board http://pinterest.com/stoneybrookesty/teen-bedroom/ non-stop day and night from the moment I found out because I was so excited to get to decorate a “fun” room. Her only requests were that it include animal print and bright colors. After looking through dozens of inspiration pictures and taking a trip down the paint aisle at Lowes, she decided on bright pink (Valspar “First Kiss”), green (Valspar “Parakeet Green”), lavender (Valspar “Berries Galore”) and teal for her color scheme.
The headboard we scored for a cool $15 at the Habitat for Humanity ReStore and it just needed a coat of paint and a 1.5 yards of Nu-Suede fabric. We didn’t realize until we had the headboard home that it was sized for a queen and not a full so we had to do a little improv on the legs and attached a 12 inch section of 1 x 12 pine. These were leftover from the frame were no added cost.
We chose to make the Captain's storage bed from the Ana White plans because I wanted to make sure Tiff had plenty of room to put away all her books and make it easier to keep her room clean. The chevron storage bins are from Lowes. Which happened to have cheapest bins in fabric we liked and that fit when we were looking. We also found lots of good options at Target.
This 8ft dining table and bench was created with inspiration from Ana White (with a few modifications). It was made with all scrap wood except the table top. Full details of the table build (and kitchen remodel) can be found at www.chasingadreamblog.wordpress.com.
We made the farmhouse bed with a few modifications. We distressed the wood and did a whitewash finish. Absolutely love how this turned out!
I had been wanting a trestle table for months but couldn't swallow the outrageous pricetags that came along with the tables. I was also dealing with a small space, so the table had to be just the right size.
Thu, 09/29/2022 - 13:55
Love the two tone finish and it looks perfect in your space! Thanks for sharing.
This is from the simple white outdoor sofa plans, they were very easy to follow and came out great. I built it out of cedar for my mom's birthday that is her favorite wood. The cushions came from Wal-Mart on sale for 70.00 for the set. There is about 140 total in everything.
First time actually following a plan and not making it up as I go along! Turned out pretty nice :-)
I used the easy frame and panel doors instructions to build 4 new large cabinet doors for my hallway cabinets! I painted them Sherwin Williams Alabaster. You can find my full blog post about them here: http://www.leapoffaithcrafting.com/make-shaker-cabinet-doors/
Hi, I'm Kevin, (Kevin's Woodkraft) I've made 4 of these so far and really enjoy building them. I decided to cut vertical grooves to make the back panel more like paneling but also going vertical instead of horizontal it allowed me to space the grooves perfectly symmetrical.
I built this for my sister for her 30th Birthday. She loved it!! It took me 4 days to make this. I took my time and put 3 coats of paint on it before assembling it. I am very pleased with the outcome...Thanks Ana for the plans!! :-)
This tv stand was my second project I made. It wasn't too difficult, but I'm definitely glad it's done and I can reclaim my kitchen counter!!
I designed this myself, gathering ideas here and there from different stands I saw. The tv stand I really wanted was this one from Wisteria.com. http://www.wisteria.com/Recycled-Pine-Console/productinfo/W4180/ I've been wanting it for years, and it was about $1200. So that's where I got the idea for the slatted shelves, and the industrial wheels.
The hardest part were the "x's" on the sides, and finishing it, getting in every nook and cranny. Not sure how I feel about the finish, so I'm going to live with it for awhile.
NOTE* Casters were bought BRAND NEW a week ago on amazon.com. I soaked them in muriatic acid for 24 hours, and then dipped them in baking soda and rinsed. Then I did minor touches with a propane torch. Didn't turn out how I expected, but I like how they turned out. PLEASE do your homework on muriatic acid before using it!!
The corner brackets on the top were found on wildwesthardware.com.
The lumber for this project was only about $80. But the corner brackets were $17 each (they are hand forged) and the wheels were $100 for the 4, (after shipping). Still better than $1200!!!
**On the 2nd and 3rd pic, the steel wool juice hasn't dried completely, that's why it looks splotchy.**
Fri, 07/12/2013 - 21:25
OOPS! I also took the 2x4 idea and the "x's" on the side from ANA'S RUSTIC CONSOLE!!!!! Also forgot to mention that this was my first project using the kreg jig. LOVE LOVE LOVE that thing!!!
Fri, 07/12/2013 - 21:26
OOPS! I also took the 2x4 idea and the "x's" on the side from ANA'S RUSTIC CONSOLE!!!!! Also forgot to mention that this was my first project using the kreg jig. LOVE LOVE LOVE that thing!!!
Hooray! I recently finished building a dining room bench. For this project, I used the Providence Bench plans by Ana White. I started this project in May, and two months later it is finally complete! I am really happy with how the bench turned out! It is pretty sturdy and makes for a nice addition to the dining room!
Freestanding closet shelving modified to make a mudroom!! More details in link below.
cube bookshelves modified to have one open shelf and 3 cube slots
Comments
Ana White Admin
Wed, 12/29/2021 - 12:08
Nice work!
It looks fantastic, thanks for sharing!